Menu
EUR

Tractor parts Deutz-Fahr AgroPrima 4.31

Looking for parts for your Deutz-Fahr AgroPrima 4.31 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

354 parts found for Deutz-Fahr AgroPrima 4.31
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€176,21 €145,63 €167,35 €138,31
You save 5%
PROBOSS Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment, longitudinal adjustment, backrest tilt adjustment. Mechanical lumbar support... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€825,20 €681,98
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€276,38 €228,41 €262,55 €216,98
You save 5%
LED headlight dipped beam / main beam / marker light, 140 x 140 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam/full beam/position light. Installati... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€104,85 €86,65 €94,85 €78,39
You save 10%
Clutch kit double clutch Deutz-Fahr AgroPrima, AgroXtra, DX
Contents: Double clutch, clutch plate and 2x release bearing More
Contents: Double clutch, clutch plate and 2x release bearing
€1.090,82 €901,50 €1.002,35 €828,39
You save 8%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€287,19 €237,35 €272,80 €225,45
You save 5%
GRANIT Double hydraulic pump 19 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
GRANIT
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. More
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17.
€333,77 €275,84 €317,00 €261,98
You save 5%
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm. More
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm.
€47,48 €39,24 €45,10 €37,27
You save 5%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€359,15 €296,82 €341,15 €281,94
You save 5%
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5.70, 6.05, Agroprima 4.31, 4.51, 4.56, 6.06, 6.16 More
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5....
€1.072,39 €886,27 €970,25 €801,86
You save 10%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€48,05 €39,71 €43,45 €35,91
You save 10%
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5. More
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5.
€56,10 €46,36 €53,25 €44,01
You save 5%
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
MAHLE
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | Charging current (A): 80 | Nominal voltage (V): 14 | Pulley Ø (mm): 6... More
Additional information: Dust-tight with W connection | Flange size (mm...
€360,82 €298,20 €214,75 €177,48
You save 40%
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
€393,37 €325,10 €373,70 €308,84
You save 5%
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€35,00 €28,93
GRAMMER Seat MSG95G/721 air suspended 12 V, seat width 480 mm
GRAMMER
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 685 → 745 | Joystick console: Optional | On-board voltage (V): 12 | Restraint s... More
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 6...
€2.131,15 €1.761,28
Brake cylinder rear drum brake bore Ø 38,1 mm, DOT4 Deutz-Fahr
Medium: DOT4. Hole Ø: 38.1 mm. More
Medium: DOT4. Hole Ø: 38.1 mm.
€440,92 €364,40 €418,85 €346,16
You save 5%
Bosch/Rexroth Double pump anticlockwise 19 + 11 cm³/rpm. Deutz-Fahr
Bosch/Rexroth
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 230/280 bar. Direction of rotation: Anticlockwise. Output volume: ... More
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating p...
€948,76 €784,10 €901,30 €744,88
You save 5%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.075,69 €889,00 €864,85 €714,75
You save 20%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.004,91 €830,50 €807,90 €667,69
You save 20%
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Walterscheid
Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, RREG 2009/144/EC, VO (EU) 2... More
Description: This product is an automatic trailer hitch. The jaw dimen...
€2.101,77 €1.737,00 €1.733,95 €1.433,02
You save 18%
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm. More
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm. More
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm.
€52,15 €43,10 €49,50 €40,91
You save 5%
Showing 1 - 24 of 354

Parts for your Deutz-Fahr AgroPrima 4.31 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroPrima 4.31. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroPrima 4.31. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroPrima 4.31. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart