Web Analytics
Deutz-Fahr Intrac 2003 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr Intrac 2003

Looking for parts for your Deutz-Fahr Intrac 2003 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

170 parts found for Deutz-Fahr Intrac 2003
Show:
GRANIT Bush for fan Deutz-Fahr
€80,36 €66,41
GRANIT Valve cover gewelfd Fendt, Deutz-Fahr
GRANIT
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€24,61 €20,34 €24,12 €19,93
You save 2%
GRANIT Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 57.9 mm. Menke no.... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€617,71 €510,50 €525,05 €433,93
You save 15%
GRANIT Temperature warning switch 12 V, M10, flat head
GRANIT
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€104,06 €86,00 €98,86 €81,70
You save 5%
FLEETGUARD Fuel filter Ø 76,40 mm, height 125,3 mm, M16 x 1,5
€11,34 €9,37 €11,11 €9,18
You save 2%
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
€41,09 €33,96 €40,27 €33,28
You save 2%
GRANIT Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
GRANIT
Dimensions: Ø 35 mm. More
Dimensions: Ø 35 mm.
€7,15 €5,91 €7,01 €5,79
You save 2%
GRANIT Tank cap with ventilation Lockable, tank collar Ø 106 mm
GRANIT
Filler neck Ø: 106 mm. More
Filler neck Ø: 106 mm.
€26,83 €22,17 €26,29 €21,73
You save 2%
GRANIT Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
GRANIT
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,1 mm. More
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. T...
€3,64 €3,01 €3,57 €2,95
You save 2%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.744,82 €1.442,00 €1.483,10 €1.225,70
You save 15%
GRANIT Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
GRANIT
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Holes / PCD (mm): 3 x 10,7 / 127,0 | Spacing flange to flywheel (mm): 28,... More
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teet...
€285,51 €235,96 €271,23 €224,16
You save 5%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €419,54 €346,73
You save 27%
GRANIT Rubber grommet cooling fan Fendt, Deutz-Fahr
€5,25 €4,34 €5,15 €4,26
You save 2%
GRANIT Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
GRANIT
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. Material: Nylon. Thickness: 3,7 mm. More
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner...
€1,25 €1,03 €1,23 €1,02
You save 1%
GRANIT Crankshaft seal Ø 65 x 85 x 13 mm Deutz engine FL912, FL913, BFL913
€22,29 €18,42 €21,84 €18,05
You save 2%
GRANIT Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
GRANIT
Engine types: FL812, FL912. Dimensions: Ø 60 mm. More
Engine types: FL812, FL912. Dimensions: Ø 60 mm.
€8,39 €6,93 €8,22 €6,79
You save 2%
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€385,98 €318,99 €328,08 €271,14
You save 15%
GRANIT Gasket lift housing 240 x 300 mm Deutz-Fahr
GRANIT
Dimensions: 240 x 300 mm. More
Dimensions: 240 x 300 mm.
€64,61 €53,40 €63,32 €52,33
You save 2%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.058,75 €875,00 €899,94 €743,75
You save 15%
GRANIT Rivet copper 5 x 10 mm, DIN 7338-B - 100 pieces
GRANIT
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material...
€50,52 €41,75 €49,51 €40,92
You save 2%
GRANIT Rivet copper 3 x 8 mm, DIN 7338-B - 100 pieces
GRANIT
Hole Ø: 3 mm. Length: 8 mm. d2: 5,5 mm. K: 0,8 mm. e: 1,5 mm. Material: Steel. DIN: 7338-B. More
Hole Ø: 3 mm. Length: 8 mm. d2: 5,5 mm. K: 0,8 mm. e: 1,5 mm. Materia...
€27,35 €22,60 €26,80 €22,15
You save 2%
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€55,42 €45,80 €41,78 €34,53
You save 25%
HELLA Spring for headlight panel
€19,17 €15,84
GRANIT Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€518,86 €428,81 €425,52 €351,67
You save 18%
Showing 25 - 48 of 170

Parts for your Deutz-Fahr Intrac 2003 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2003. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2003. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2003. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart