Menu
EUR

Tractor parts Deutz-Fahr DX 3.70

Looking for parts for your Deutz-Fahr DX 3.70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

316 parts found for Deutz-Fahr DX 3.70
Show:
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €262,55 €216,98
You save 9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
You save 9%
GRANIT Piston set, complete Ø 100 mm, combustion chamber 55 mm
GRANIT
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €138,70 €114,63
You save 9%
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm. More
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm.
€49,55 €40,95 €45,10 €37,27
You save 9%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€827,03 €683,50 €792,55 €655,00
You save 4%
GRANIT Brake pad set 150 x 228 x 4,7 mm Deutz 3006-6206
GRANIT
To fit as: Deutz 3006, 4006, 4506, 5006, 5206, 5506, 6206 More
To fit as: Deutz 3006, 4006, 4506, 5006, 5206, 5506, 6206
€83,84 €69,29 €76,30 €63,06
You save 9%
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, 4.10, 4.30, 4.50, 4.70,... More
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 2...
€48,95 €40,45
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€192,19 €158,83 €174,95 €144,59
You save 9%
Track rod telescopic axle 940 - 1480 mm, taper 16 - 28 mm
A: 940 - 1480 mm. C: 16 - 28 mm. G: . More
A: 940 - 1480 mm. C: 16 - 28 mm. G: .
€636,57 €526,09 €579,50 €478,93
You save 9%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
You save 9%
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5. More
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5.
€58,54 €48,38 €53,25 €44,01
You save 9%
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
MAHLE
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | Charging current (A): 80 | Nominal voltage (V): 14 | Pulley Ø (mm): 6... More
Additional information: Dust-tight with W connection | Flange size (mm...
€358,59 €296,36 €214,75 €177,48
You save 40%
LUK Clutch kit Deutz-Fahr D 6006 - D 7807, DX 3.70 - 3.90
LUK
Contents: Pressure plate 458231003111, clutch plate 458328012216 More
Contents: Pressure plate 458231003111, clutch plate 458328012216
€1.038,52 €858,28 €992,55 €820,29
You save 4%
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
€410,48 €339,24 €373,70 €308,84
You save 9%
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€58,03 €47,96 €52,80 €43,64
You save 9%
GRAMMER Seat MSG95G/721 air suspended 12 V, seat width 480 mm
GRAMMER
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 685 → 745 | Joystick console: Optional | On-board voltage (V): 12 | Restraint s... More
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 6...
€2.131,15 €1.761,28
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€29,15 €24,09
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
You save 4%
GRANIT Track rod rigid axle, mechanical steering A 1048 mm, B M22 x 1,5
GRANIT
A: 1048 mm. B: M22 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 mm. E: 26 mm. F: 20,6 mm. More
A: 1048 mm. B: M22 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 mm. E: 2...
€209,82 €173,41 €191,00 €157,85
You save 9%
GRANIT Temperature warning switch 12 V, M10, flat head
GRANIT
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€108,59 €89,74 €98,85 €81,69
You save 9%
Clutch kit double clutch DuT 280 Deutz-Fahr
Contents: Clutch DuT 280 (445K88867045), organic disc (445S64926042), release bearing (445A63100030) More
Contents: Clutch DuT 280 (445K88867045), organic disc (445S64926042), ...
€972,15 €803,43 €885,00 €731,41
You save 9%
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€35,00 €28,93
Stop cable A 1360 mm, B 1060 mm Deutz-Fahr DX 3.60 VC - 3.90 VC
€159,76 €132,03 €145,40 €120,17
You save 9%
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm. More
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm.
€54,42 €44,98 €49,50 €40,91
You save 9%
Showing 1 - 24 of 316

Parts for your Deutz-Fahr DX 3.70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 3.70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 3.70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 3.70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart