Menu
EUR

Tractor parts Deutz-Fahr DX 90

Looking for parts for your Deutz-Fahr DX 90 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

282 parts found for Deutz-Fahr DX 90
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €167,35 €138,31
You save 9%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €262,55 €216,98
You save 9%
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€197,74 €163,42 €180,00 €148,76
You save 9%
GRANIT Replacement key lock number 14610 - 2 pieces
GRANIT
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
You save 9%
GRANIT Piston set, complete Ø 100 mm, combustion chamber 55 mm
GRANIT
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €138,70 €114,63
You save 9%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€827,03 €683,50 €792,55 €655,00
You save 4%
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, 4.10, 4.30, 4.50, 4.70,... More
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 2...
€48,95 €40,45
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€192,19 €158,83 €174,95 €144,59
You save 9%
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5.70, 6.05, Agroprima 4.31, 4.51, 4.56, 6.06, 6.16 More
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5....
€1.065,75 €880,79 €970,25 €801,86
You save 9%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
You save 9%
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5. More
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5.
€58,54 €48,38 €53,25 €44,01
You save 9%
GRANIT Steering valve ew/dw 220 bar, 60 l/min, system SD60 Deutz
GRANIT
This control valve has been specially developed for Deutz tractors with SD60 hydraulics. Thanks to the high output up to four pieces can be flanged di... More
This control valve has been specially developed for Deutz tractors wit...
€663,73 €548,54 €604,25 €499,38
You save 9%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
You save 4%
GRANIT Temperature warning switch 12 V, M10, flat head
GRANIT
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€108,59 €89,74 €98,85 €81,69
You save 9%
GRANIT Wiper motor with switch 12 V, 135°, M12 x 1
GRANIT
With integrated switch. More
With integrated switch.
€127,48 €105,36 €116,00 €95,87
You save 9%
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€19,15 €15,83
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm. More
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€35,00 €28,93
GRANIT Cylinder head Deutz-Fahr
GRANIT
Engine types: BFL913, BFL913T. More
Engine types: BFL913, BFL913T.
€296,24 €244,83 €269,65 €222,85
You save 9%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,00 €1.402,48
You save 21%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€504,50 €416,94 €459,25 €379,55
You save 9%
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Operating pressure max. (bar): 220 | Bosch no.: 151722... More
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole patt...
€653,73 €540,27 €595,15 €491,86
You save 9%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,20 €40,66
You save 9%
Showing 1 - 24 of 282

Parts for your Deutz-Fahr DX 90 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 90. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 90. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 90. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart