Menu
EUR

Fendt 208 Vario (Typ 331) tractor parts & technical data

Lighting, electrics and trailer couplings for the Fendt 208 Vario Typ 331. Check the Typ number on your type plate, then choose from more than 250 parts.

296 parts found for Fendt 208 Vario
Show:
Door lock, left Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€59,17 €48,90 €56,20 €46,45
You save 5%
GRANIT Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
€39,45 €32,60 €37,45 €30,95
You save 5%
Holder left width 75 mm, height 165 mm, material thickness 3 mm Fendt
Width: 75 mm. Material thickness: 3 mm. H: 165 mm. More
Width: 75 mm. Material thickness: 3 mm. H: 165 mm.
€22,95 €18,97
GRANIT Adjusting nut for lower link strut M22 x 2,5 mm Fendt
GRANIT
Dimensions: Thread = M22 x 2.5 mm. More
Dimensions: Thread = M22 x 2.5 mm.
€47,67 €39,40 €45,25 €37,40
You save 5%
Pin for lower link support 22 x 89 mm Fendt
Dimensions: 22 x 89 mm. More
Dimensions: 22 x 89 mm.
€35,45 €29,30
GRANIT Hydraulic top link check valve at top cat. 2, 585 - 825 mm, Ø 35 mm
GRANIT
Top link type: hydraulic. Type: Tail hook/ball joint. A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 585 / 825 mm. Stroke: 240 mm. Piston rod Ø D: 35 mm. Cyl... More
Top link type: hydraulic. Type: Tail hook/ball joint. A cat.: 2 / 25,4...
€394,36 €325,92 €356,80 €294,88
You save 10%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
GRANIT Buffer hood Fendt
€8,15 €6,74
GRANIT Circlip hood Fendt
€1,21 €1,00
GRANIT Solenoid switch start interlock 42 V, 0,5 A, cable, connector
GRANIT
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug. More
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug.
€57,17 €47,25 €54,30 €44,88
You save 5%
Pressure switch air pressure system, mounting on air tank
Version: Mounting: on the compressed air tank. More
Version: Mounting: on the compressed air tank.
€218,40 €180,50
GRANIT Push button switch PTO shaft 12 - 16 V, button yellow, make contact, Ø 30 mm
GRANIT
Version: 12 - 16 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustp... More
Version: 12 - 16 V switching voltage, Yellow button, make contact, Tot...
€39,87 €32,95 €36,00 €29,75
You save 10%
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
SACEX
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 128 mm. Total height: 204 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€40,90 €33,80 €38,85 €32,11
You save 5%
HELLA Work lamp flood beam H3 55 W, 110 x 120 x 103 mm, 12 / 24 V, hanging
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 110 x 120 x 103 mm. Mo... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€63,96 €52,86
GRANIT Light housing
€9,35 €7,73
Cobo Rear light 140 x 98 x 79 mm, 12 V, P21W, P21/5W, Super Seal 4-pin
Cobo
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Super Seal connector, 4-pin. Width: 140 mm. Form: Oval. Height: 98 mm. Hole spacing: 45 mm. Dime... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Super Seal conne...
€76,45 €63,18 €69,15 €57,15
You save 10%
Showing 193 - 216 of 296

Parts for the Fendt 208 Vario Typ 331

Worn pins and bushes in the linkage, a switch that no longer clicks into place, a beacon that leans over at every bump. Those are the kinds of jobs this page is for. It only lists parts for the Fendt 208 Vario with Typ 331 on its type plate, more than 250 of them, from GRANIT, HELLA, Wabco, Scharmüller and Sauermann.

Linkage and top link

For the three point linkage there are pins, bushes and a hydraulic top link with a check valve block. A hydraulic top link lets you set the angle of an implement from the seat. Retract it fully when the tractor will stand for a while, so the chromed rod is protected from moisture and dirt. Pitting in the chrome is exactly what wears out top link seals in no time. When a bush has worn oval, replace the pin with it, otherwise the new part simply wears to the old shape.

Switches and lights on the cab

Inside the Typ 331 cab there are push button switches for the hazard lights, rocker switches and replacement symbols for the switch faces. On the roof sits a rotating beacon, with a spring for the holder if it has gone slack. Headlights and LED work lamps take care of visibility after dark. There is also a disc for the rear window hinge and a holder for the wheel chock.

Engine and air brake

The pressure switch on the fuel filter head warns you when the filter starts to clog. If that light comes on, change the filter before you suspect the switch. For the air brake there are connector heads with matching covers.

Safe on the road

If the 208 Vario spends time on public roads, working lights matter. A beacon that turns, bright headlights and hazard lights that come on when needed are the minimum. The wheel chock holder keeps the chock within reach when you have to stop on a slope with a trailer behind you.

Other versions and related models

If Typ 331 does not match your plate, try the 208 Vario Typ 301 or the overview page for the Fendt 208 Vario. The other tractors in the Fendt 200 Vario series each have their own page as well:

This group also includes V Vario models of the 208 and the 210. For the rest of the brand, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart