Menu
EUR

Fendt 309 Vario (Typ 322) tractor parts & technical data

Not sure which parts fit your Fendt 309 Vario? Read off the type number. If it is Typ 322, the more than 400 items here fit, from lighting to trailer couplings.

431 parts found for Fendt 309 Vario
Show:
Bush for force sensor pin 37 x 45/54 x 44 mm Fendt, Massey Ferguson
Dimensions: 37 x 45/54 x 44 mm. More
Dimensions: 37 x 45/54 x 44 mm.
€75,14 €62,10 €71,35 €58,97
You save 5%
Wiper motor 12 V, 104°, A 61,5 mm Fendt, John Deere
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45. More
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45.
€201,51 €166,54 €191,40 €158,18
You save 5%
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.160,61 €959,18 €1.026,40 €848,26
You save 12%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.122,52 €927,70 €992,75 €820,45
You save 12%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 415 mm
Scharmüller
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 6... More
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Ve...
€1.865,61 €1.541,83 €1.649,95 €1.363,60
You save 12%
GRANIT Blind cover for headlight panel Fendt
GRANIT Potentiometer rotary function for control unit EHR
GRANIT
Version: For electronic linkage control unit. More
Version: For electronic linkage control unit.
€96,80 €80,00
Potentiometer clutch pedal and gear lever
Version: Clutch pedal (position) and gear shift (driving range detection level 1 or 2). More
Version: Clutch pedal (position) and gear shift (driving range detecti...
€132,78 €109,74 €120,10 €99,26
You save 10%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
You save 10%
GRANIT Sensor sensor - engine speed, connection cable with plug Agrotron
GRANIT
Version: Sensor - engine speed, Connection cable with plug. More
Version: Sensor - engine speed, Connection cable with plug.
€141,29 €116,77 €134,20 €110,91
You save 5%
Symbol rear work light black / white
Version: Black/white, rear work light. More
Version: Black/white, rear work light.
€6,95 €5,74
Start switch 12 V / 24 V, lock 14603-2 keys
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, 58, 0: off, 1: consumer, 2: start. Switching stages: 0-1-2. Plug: 7. Voltage ran... More
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, ...
€54,66 €45,17 €51,90 €42,89
You save 5%
GRANIT Toggle switch front work light
GRANIT
Version: Front work light, rear work light. More
Version: Front work light, rear work light.
€79,72 €65,88 €72,10 €59,59
You save 10%
Push button switch lower 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustpro... More
Version: 12 - 16 V switching voltage, Blue button, make contact, Total...
€19,55 €16,16
Push button switch work light, top 12 / 24 V, button green, Ø 30 mm
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals 6.3 x 0.8 (L- R- 49a- 30b- 15- 49), dustproof and splashproof. More
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals...
€33,00 €27,27
GRANIT LED rear light, left / right Ø 140 x 50 mm, 12 / 24 V
GRANIT
Nominal voltage: 12 / 24 V. Installation location: Left/right. Bulb: LED. Bulbs included: Yes. Light function: Indicator light, rear light, brake ligh... More
Nominal voltage: 12 / 24 V. Installation location: Left/right. Bulb: L...
€57,97 €47,91 €52,40 €43,31
You save 10%
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 mm. Light function: Close-range illumination. Bulb: H3. Material: Hous... More
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x ...
€60,65 €50,12
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
GRANIT Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
GRANIT
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm. Material: Plastic. More
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole...
€6,60 €5,45
GRANIT Spring for rotating beacon holder
Showing 121 - 144 of 431

Fendt 309 Vario Typ 322 parts

Lighting is no afterthought on a tractor. Anyone working the fields past sunset in autumn, or heading out on the road in the dark, notices straight away when a work light or beacon gives up. For the Fendt 309 Vario with Typ 322 on its type plate there is plenty here for the lights, and everything else from grab handles to gaskets besides: more than 400 parts that suit this version.

Lights on the roof and cab

There are LED work lights, including HELLA spotlights, and beacons together with their holders and the spring that keeps the beacon clamped in its holder. That spring is easy to forget, yet a beacon that rocks back and forth over every bump will not last long. For switching it all on and off there are rocker switches and push button switches, such as the red hazard light switch. On the road a beacon that turns properly is no luxury, least of all with a wide implement behind the tractor.

Tip: when a work light stops working, do not reach for a new lamp straight away. Check the fuse, the rocker switch and the plug behind the lamp first. Up on the roof, where rain and dust get into the connections, a corroded plug is often the culprit, and a cleaned plug with a little contact spray can save you a new lamp. If you do replace the lamp, mount the new one firmly, because vibration is hard on any work light.

Cab, linkage and sealing

In the cab there are grab handles, floor mats and gas struts for the front window frame. For the linkage and pivots you will find bushes, including linkage bushes also used on Massey Ferguson, along with pins and potentiometers. Covers, seals and gaskets deal with leaks from the engine or hydraulics. Parts from Wabco, Scharmüller and PROBOSS round things off.

Typ 322 or the other version

Everything on this page belongs to Typ 322. If your type plate shows another number, look at the Fendt 309 Vario (Typ 336) instead. The Fendt 309 Vario page combines both versions, which helps if you still need to check the number. Where the plate is no longer legible, compare the reference number on the old part with the details shown for each item.

The other models in the Fendt 300 each have a page with their own parts: Fendt 310 Vario, Fendt 311 Vario, Fendt 312 Vario, Fendt 313 Vario and Fendt 314 Vario. For the rest of the make there is the Fendt parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart