Menu
EUR

Fendt 310 Vario (Typ 323) tractor parts & technical data

The Fendt 310 Vario Typ 323 from the Fendt 300 series has more than 400 matching parts here, including lighting, electrics and trailer couplings.

432 parts found for Fendt 310 Vario
Show:
Spring driepuntcentrering Fendt
Spring driepuntcentrering Fendt
€20,85 €17,23
 
GRANIT Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
10%
GRANIT
Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
€159,52 €131,83 €144,30 €119,26
 
Walterscheid Ball insert system 80, shank 60 x 60 mm, working length 203 mm
21%
Walterscheid
Ball insert system 80, shank 60 x 60 mm, working length 203 mm
Shaft cross section W x H: 60 x 60 mm. Overhang: 203 mm. Hole spacing: 115 mm. H...
€2.419,03 €1.999,20 €1.900,65 €1.570,79
 
GRANIT Potentiometer rotary function control panel air conditioning
GRANIT
Potentiometer rotary function control panel air conditioning
Version: For control unit - air conditioning.
€519,25 €429,13
 
Sensor driving speed A, pinion speed G, conical rondsel
5%
Sensor driving speed A, pinion speed G, conical rondsel
Version: Function: Driving speed A, Transmission speed G, bevel pinion.
€117,61 €97,20 €111,70 €92,31
 
GRANIT Hall sensor driving speed, engine speed, rear PTO shaft and for
5%
GRANIT
Hall sensor driving speed, engine speed, rear PTO shaft and for
Version: Driving speed A, engine speed B, rear PTO speed C, front PTO speed E.
€101,13 €83,58 €96,00 €79,34
 
Hall sensor driving speed, engine speed, rear PTO shaft, PTO shaft
5%
Hall sensor driving speed, engine speed, rear PTO shaft, PTO shaft
Version: Driving speed A, Engine speed B, Rear PTO speed C, Front PTO speed E.
€101,13 €83,58 €96,00 €79,34
 
GRANIT Sensor sensor - engine speed with connection cable and plug
GRANIT
Sensor sensor - engine speed with connection cable and plug
Version: Sensor - engine speed, Connection cable with plug.
€116,70 €96,45
 
Knob for heater / operation
Knob for heater / operation
Version: For heater/operation.
€13,80 €11,41
 
Pinion shaft operating switch heating
Pinion shaft operating switch heating
Version: For heating control switch.
€9,95 €8,22
 
GRANIT Zijpositielicht red/white, lamp 12V5WK / R5W
GRANIT
Zijpositielicht red/white, lamp 12V5WK / R5W
Version: Red/white. Bulb: 12V5WK / R5W.
€24,00 €19,83
 
Pipe RKLE
10%
Pipe RKLE
€102,66 €84,84 €92,85 €76,74
 
Micro relay changeover contact 12 V, 10 - 20 A, 5-pin, without bracket
Micro relay changeover contact 12 V, 10 - 20 A, 5-pin, without bracket
Version: 12 V / 10 - 20 A, Without bracket, 5-pin, Connection: 3 x 4.8 mm, 2 x 6...
€9,35 €7,73
 
Replacement key plastic-coated black, lock number 14607
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,25 €5,99
 
Stabilus Windshield frame shock absorber 250 N, 600,5 mm, stroke 252,5 mm Fendt
5%
Stabilus
Windshield frame shock absorber 250 N, 600,5 mm, stroke 252,5 mm Fendt
To fit as: Fendt Windscreen
€40,92 €33,82 €38,85 €32,11
 
AKS-Dasis Air conditioning compressor 12 V, pulley-Ø 133 mm, 1 groove Fendt
AKS-Dasis
Air conditioning compressor 12 V, pulley-Ø 133 mm, 1 groove Fendt
Refrigerant: R 134a | Suitable oil: PAG 46 | Pulley Ø (mm): 133 | No. of grooves...
€632,15 €522,44
 
HELLA Work lamp flood beam xenon D1S 42 W, 12 V, 162 x 192 x 134 mm
HELLA
Work lamp flood beam xenon D1S 42 W, 12 V, 162 x 192 x 134 mm
Nominal voltage (V): 12 | Bulbs included: - | Protection class: IP5K4K/IPX9K | D...
€456,00 €376,86
 
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width...
€1.128,50 €932,64
 
HELLA Work lamp flood beam Ultra beam H3, 12 V, 112 x 102 x 94 mm
HELLA
Work lamp flood beam Ultra beam H3, 12 V, 112 x 102 x 94 mm
Bulb: H3 | Bulbs included: No | Test mark: ADR/GGVS tested | Form: Square | Dime...
€31,60 €26,12
 
FEBI Hydraulics- / getriebeöl filters HD722, HF35320
73%
FEBI
Hydraulics- / getriebeöl filters HD722, HF35320
€127,72 €105,55 €34,83 €28,79
 
FEBI Alternator 14 V / 150 A, form B, flange 56,0 mm
43%
FEBI
Alternator 14 V / 150 A, form B, flange 56,0 mm
To fit as: Fendt, Hürlimann, Lamborghini, Same
€435,60 €360,00 €247,81 €204,80
 
HELLA Starter motor 12 V, 4,0 kW, 9 teeth, Ø 89 mm, clockwise
20%
HELLA
Starter motor 12 V, 4,0 kW, 9 teeth, Ø 89 mm, clockwise
€529,73 €437,79 €425,85 €351,94
 
Showing 217 - 240 of 432

Fendt 310 Vario Typ 323 parts

Only one version of the Fendt 310 Vario is covered here, the one with Typ 323 on its type plate. More than 400 parts are listed for this Typ number. If your plate shows a different number, the right page is Typ 337 or Typ 347. Not sure which you have? The general Fendt 310 Vario page brings all versions together.

Lights and switches

For the Typ 323 there are LED work lamps, with brackets and holders to mount them, beacons and the spring that keeps the beacon holder upright. On the dash there are push button switches, including the hazard switch, and rocker switches. Rotary potentiometers handle the position sensing for the controls.

When you wire in a replacement work lamp, use a sealed connector or heat shrink rather than an open terminal block. Water in a joint causes flickering months later, even with a perfectly good lamp.

Inside the cab

Small cab parts wear out first. This page has gas struts, for example for the windscreen, handles for the body panels, rubber foot mats and connector covers. A foot mat with a hole worn through at the pedals lets dirt and water reach the floor panel, so it is worth changing before it gets that far.

Pins, bushes and seals

  • pins and bushes for joints and linkages
  • seals and gaskets
  • holders and covers

A worn bush shows up as play and a knock every time the joint moves. Check the pin as well. A pin with a groove worn into it will eat a new bush in no time.

Brands on this page include GRANIT, HELLA, Wabco, Scharmüller and PROBOSS.

Recognising the right part

Apart from the Typ number, the old part is your best guide. Switches, potentiometers and work lamps usually carry a printed or embossed reference number. Compare it with the details shown for each item. For pins and bushes, measure diameter and length, and for a gasket simply lay the old one next to the new. Take a photo before you strip anything, so you know exactly how holders, covers and cables were fitted.

If you run several work lamps, split them over two fuses so one failure does not leave you in the dark.

Sister tractors in the Fendt 300

The other models in this range each have their own page:

For the complete range of the brand, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart