Menu
EUR

Fendt 310 Vario (Typ 323) tractor parts & technical data

The Fendt 310 Vario Typ 323 from the Fendt 300 series has more than 400 matching parts here, including lighting, electrics and trailer couplings.

432 parts found for Fendt 310 Vario
Show:
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
10%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
 
GRANIT Coolant temperature sensor M12 x 1,5, wrench size 19 mm, 2-pin
GRANIT
Coolant temperature sensor M12 x 1,5, wrench size 19 mm, 2-pin
Colour: Grey. Thread: M12 x 1.5. To fit: Including • IVECO. Technical data: - Nu...
€37,25 €30,79
 
Symbol front work light black / white
Symbol front work light black / white
Version: Black/white, front work light.
€20,00 €16,53
 
Symbol rear work light black / white
Symbol rear work light black / white
Version: Black/white, rear work light.
€6,95 €5,74
 
Push button switch lower 12 - 16 V, button blue, make contact, Ø 30 mm
Push button switch lower 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button tr...
€19,55 €16,16
 
Push button switch summation valve 12 / 24 V, button blue, Ø 30 mm
5%
Push button switch summation valve 12 / 24 V, button blue, Ø 30 mm
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (...
€51,70 €42,73 €49,10 €40,58
 
Cobo Reversing warning system 12 / 24 V, 85 dB, 2900 Hz, continuous or pulsating
10%
Cobo
Reversing warning system 12 / 24 V, 85 dB, 2900 Hz, continuous or pulsating
Nominal voltage: 12 / 24 V. Volume: 85 dB. Frequency: 2900 Hz. Connection: Blade...
€64,72 €53,49 €58,55 €48,39
 
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 ...
€60,65 €50,12
 
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
10%
GRANIT
Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Lig...
€51,14 €42,26 €46,25 €38,22
 
Headlight insert 12V55W H3
Headlight insert 12V55W H3
Bulb: 12V55W / H3.
€176,00 €145,45
 
Relays make contact 12 V / 70 A, 4-pin, 6,3 mm, with holder
Relays make contact 12 V / 70 A, 4-pin, 6,3 mm, with holder
Version: 12 V / 70 A, with bracket, 4-pin, blade terminal 6.3 mm, With blocking ...
€27,50 €22,73
 
GRANIT LED work lights spotlight 18 W, 1200 lm, 120 x 104 x 81 mm, 12 / 24 V
10%
GRANIT
LED work lights spotlight 18 W, 1200 lm, 120 x 104 x 81 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 10 - 30 | Bulb: LED | Bulbs in...
€101,00 €83,47 €91,35 €75,50
 
Alternator 14 V / 150 A, form B, flange 56,0 mm
10%
Alternator 14 V / 150 A, form B, flange 56,0 mm
To fit as: Fendt, Hürlimann, Lamborghini, Same
€626,14 €517,47 €566,50 €468,18
 
HELLA Ballast 12 V, 396 mm Fendt 309 - 930
HELLA
Ballast 12 V, 396 mm Fendt 309 - 930
Length (mm): 396 | Nominal voltage (V): 12
€351,40 €290,41
 
Scharmüller Drawbar frame standard ball 80, 89,3 kN, 3000 kg, rail 311 mm
Scharmüller
Drawbar frame standard ball 80, 89,3 kN, 3000 kg, rail 311 mm
Version: Standard | D-value (kN): 89,3 | Guide width (mm): 30 | Load capacity (k...
€1.944,25 €1.606,82
 
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Description: Height adjustable with handle | Load capacity (t): 2 | Detent pin Ø...
€1.128,50 €932,64
 
Wabco Connector head M22 x 1,5 black aluminum with valve, 8 bar
5%
Wabco
Connector head M22 x 1,5 black aluminum with valve, 8 bar
Operating pressure max. (bar): 8 | Version: Black, aluminium, with valve, for ve...
€92,46 €76,41 €87,80 €72,56
 
GRANIT Lip ring vane connection 40 x 51 x 2,5 mm Fendt, Massey Ferguson
GRANIT
Lip ring vane connection 40 x 51 x 2,5 mm Fendt, Massey Ferguson
Dimensions (mm): 40x51x2.5
€19,00 €15,70
 
GRANIT External plate PTO shaft 3,3 mm, inner 98 mm, outer 154,8 mm Fendt
GRANIT
External plate PTO shaft 3,3 mm, inner 98 mm, outer 154,8 mm Fendt
Version: Thickness: 3.3 mm Inner: 98 mm Outer: 154.8 mm
€35,60 €29,42
 
Pilot bearing 20 x 42 x 12 mm
Pilot bearing 20 x 42 x 12 mm
Dimensions (mm): 20 x 42 x 12
€7,30 €6,03
 
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitu...
€3,83 €3,17
 
Showing 169 - 192 of 432

Fendt 310 Vario Typ 323 parts

Only one version of the Fendt 310 Vario is covered here, the one with Typ 323 on its type plate. More than 400 parts are listed for this Typ number. If your plate shows a different number, the right page is Typ 337 or Typ 347. Not sure which you have? The general Fendt 310 Vario page brings all versions together.

Lights and switches

For the Typ 323 there are LED work lamps, with brackets and holders to mount them, beacons and the spring that keeps the beacon holder upright. On the dash there are push button switches, including the hazard switch, and rocker switches. Rotary potentiometers handle the position sensing for the controls.

When you wire in a replacement work lamp, use a sealed connector or heat shrink rather than an open terminal block. Water in a joint causes flickering months later, even with a perfectly good lamp.

Inside the cab

Small cab parts wear out first. This page has gas struts, for example for the windscreen, handles for the body panels, rubber foot mats and connector covers. A foot mat with a hole worn through at the pedals lets dirt and water reach the floor panel, so it is worth changing before it gets that far.

Pins, bushes and seals

  • pins and bushes for joints and linkages
  • seals and gaskets
  • holders and covers

A worn bush shows up as play and a knock every time the joint moves. Check the pin as well. A pin with a groove worn into it will eat a new bush in no time.

Brands on this page include GRANIT, HELLA, Wabco, Scharmüller and PROBOSS.

Recognising the right part

Apart from the Typ number, the old part is your best guide. Switches, potentiometers and work lamps usually carry a printed or embossed reference number. Compare it with the details shown for each item. For pins and bushes, measure diameter and length, and for a gasket simply lay the old one next to the new. Take a photo before you strip anything, so you know exactly how holders, covers and cables were fitted.

If you run several work lamps, split them over two fuses so one failure does not leave you in the dark.

Sister tractors in the Fendt 300

The other models in this range each have their own page:

For the complete range of the brand, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart