Menu
EUR

Fendt 312 Vario (Typ 325) tractor parts & technical data

Typ 325 is one generation of the Fendt 312 Vario. Check your type plate, then pick from more than 400 parts such as lighting, electrics and trailer couplings.

437 parts found for Fendt 312 Vario
Show:
Rod end lower Fendt
€253,50 €209,50 €240,80 €199,01
You save 5%
GRANIT Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
€39,08 €32,30 €37,10 €30,66
You save 5%
Pin for lower link support 25 x 96 mm Fendt
Dimensions: 25 x 96 mm. More
Dimensions: 25 x 96 mm.
€55,10 €45,54 €49,85 €41,20
You save 10%
GRANIT Gas strut door or hood 250 N, 325 mm Fendt
GRANIT
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or bonnet. Menke no.: 59193. More
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 m...
€41,19 €34,04 €37,25 €30,79
You save 10%
Skid hood Fendt
€9,40 €7,77
GRANIT Compression spring hood Fendt
Holder for chock Fendt
GRANIT Disc rear screen hinge Fendt
GRANIT Leaf spring for roof panel for Fendt
GRANIT Toothed quadrant heating for control / operation
GRANIT
Version: For control/operation. More
Version: For control/operation.
€10,20 €8,43
Knob for blower switch
Version: For blower switch. More
Version: For blower switch.
€9,20 €7,60
HELLA Rear light Ø 140 x 80 mm, 12 / 24 V
HELLA
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/brake light/indicator light | Bulb: 12V21WK / P21W 12V5WK / R5W | Bulbs included: ... More
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/br...
€35,10 €29,01
GRANIT Rear light Ø 140 x 80 mm, 12 / 24 V, left
GRANIT
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/brake light/indicator light/number plate light | Bulb: 12V10WK / R10W 12V21WK / P2... More
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/br...
€32,65 €26,98
HELLA Work lamp flood beam H3, 12 / 24 V, 55 / 70 W, angular, built-in
HELLA
Bulb: H3. Connection: AMP plug. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: plastic. Dimensions W x H x D: 182 x 102 x 103 mm. Protect... More
Bulb: H3. Connection: AMP plug. Form: Rectangular. Hole spacing: 160 m...
€65,50 €54,13
AKS-Dasis Evaporator 685 x 130 x 95 mm Fendt Farmer 307 - Favorit 926
AKS-Dasis
Equipment: Mesh length: 685 mm Mesh width: 130 mm Mesh depth: 95 mm Inlet Ø: 15 mm Outlet Ø: 12 mm More
Equipment: Mesh length: 685 mm Mesh width: 130 mm Mesh depth: 95 mm In...
€666,63 €550,93 €603,10 €498,43
You save 10%
GRANIT Inlet valve 148,2 mm, valve plate Ø 34,4 mm, shank Ø 8 mm Fendt
€39,68 €32,79 €37,65 €31,12
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€814,45 €673,10 €736,85 €608,97
You save 10%
Sauermann Bolts trailer coupling 38,2 x 31 x 126 mm
€288,46 €238,40 €274,00 €226,45
You save 5%
Elring Seal glow plug
€15,00 €12,40
LUK Pilot bearing 20 x 42 x 12 mm
LUK
Dimensions: 20 x 42 x 12 mm. More
Dimensions: 20 x 42 x 12 mm.
€31,50 €26,03
Scharmüller Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 175 mm. Thread: M20. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pat...
€702,01 €580,17 €620,85 €513,10
You save 12%
Showing 361 - 384 of 437

Fendt 312 Vario Typ 325 parts

If your 312 Vario carries Typ 325 on its plate, this page shows exactly what suits that version: more than 400 parts, with anything that belongs only on another 312 Vario left out. It runs from work lights through to the bushes and pins in the pivots.

Lights for long days

Working late into autumn evenings means a good part of the day is spent under work lights. For the Typ 325 there are LED work lights from HELLA and other makers, plus holders to mount them on the cab or mudguards. Rotating beacons are here too, along with the spring for the beacon holder.

When you replace a work light, look at the holder as well. A cracked or shaken-loose holder lets the lamp bounce over every bump, and that vibration takes its toll on the lamp and the wiring. Mount the new light on a solid holder, tighten it properly and route the cable so it does not rub on a sharp edge.

Switches and controls

In the cab of the Typ 325 there are push button switches, such as the red hazard light switch with a lock, rocker switches and rotary potentiometers. If a switch stops working, check the plug behind the panel before replacing the part. There are also handles, gas struts for the windscreen frame and rubber floor mats.

Do not underestimate a loose handle. You climb in and out many times a day, often with muddy boots, and that handle is the one thing you are holding on to. If it wobbles or the plastic has cracked, replace it before it gives way under your weight.

Pivots, seals and the trailer

  • bushes for linkage joints, which also suit a number of Massey Ferguson tractors
  • pins for hinges and pivots
  • seals for the engine and hydraulics
  • springs for the mudguards
  • Wabco coupling heads with the cover that closes them

If you are working on a pivot anyway, replace the bush and pin as a pair. A new pin in a bush that has worn oval will have play again before long.

Other versions and related tractors

If you are not certain it is a Typ 325, the Fendt 312 Vario page shows all versions together. The other versions each have their own page: Typ 339, Typ 349 and Typ 352. When in doubt, the reference number on the old part is the surest check.

From the Fendt 300, the 309 Vario, 310 Vario, 311 Vario, 313 Vario and 314 Vario also have pages of their own. Work lights, switches and cab parts are often the same across the range. The overview of the whole brand is at Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart