Menu
EUR

Fendt 312 Vario (Typ 325) tractor parts & technical data

Typ 325 is one generation of the Fendt 312 Vario. Check your type plate, then pick from more than 400 parts such as lighting, electrics and trailer couplings.

437 parts found for Fendt 312 Vario
Show:
GRANIT Constant velocity joint drive shaft Ø 108 mm, 28 teeth, profile 31,3 x 29,2 Fendt
5%
GRANIT
Constant velocity joint drive shaft Ø 108 mm, 28 teeth, profile 31,3 x 29,2 Fendt
€420,81 €347,78 €399,75 €330,37
 
Shim 0,25 mm Fendt
Shim 0,25 mm Fendt
Thickness: 0,25 mm.
€9,95 €8,22
 
Scharmüller Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
12%
Scharmüller
Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pattern: 140 ...
€702,01 €580,17 €620,85 €513,10
 
GRANIT Connection cable 2,5 m
5%
GRANIT
Connection cable 2,5 m
Length: 2.5 m. Reference no.: 1762625.
€79,73 €65,89 €75,70 €62,56
 
Connecting rod bearing undersize, 69,75 mm Fendt, Lamborghini
5%
Connecting rod bearing undersize, 69,75 mm Fendt, Lamborghini
€50,14 €41,44 €47,60 €39,34
 
GRANIT Adaptor water pump - cylinder head Ø 27 x 40 x 34 mm Fendt
GRANIT
Adaptor water pump - cylinder head Ø 27 x 40 x 34 mm Fendt
Dimensions: Ø 27 x 40 x 34 mm.
€7,00 €5,79
 
GRANIT V-belt with compressed air system Fendt 309-313
GRANIT
V-belt with compressed air system Fendt 309-313
Version: With compressed air system.
€13,25 €10,95
 
Sealing ring nozzle bracket Ø 16 x 7 mm, 1,5 mm thick, copper
Sealing ring nozzle bracket Ø 16 x 7 mm, 1,5 mm thick, copper
Thickness: 1,5 mm. Outer Ø: 16 mm. Inner Ø: 7 mm. Material: Copper.
€3,51 €2,90
 
GRANIT Hose intercooler inner-Ø 50 mm, length 70 mm Fendt
5%
GRANIT
Hose intercooler inner-Ø 50 mm, length 70 mm Fendt
Inner Ø: 50 mm. Length: 70 mm.
€59,31 €49,02 €56,30 €46,53
 
O-clamp set 8001102, FS19950, WK1070X
5%
O-clamp set 8001102, FS19950, WK1070X
€32,28 €26,68 €30,65 €25,33
 
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
 
Handle Fendt, Case IH
5%
Handle Fendt, Case IH
€39,20 €32,40 €37,20 €30,74
 
GRANIT Velour floor mat black Fendt 309 (Typ 322) - 724 (Typ 765)
5%
GRANIT
Velour floor mat black Fendt 309 (Typ 322) - 724 (Typ 765)
Material: Velour. Colour: Black. Type: Fendt 300, 500, 700 Vario series. Technic...
€88,54 €73,17 €84,10 €69,50
 
Hinge pin rear screen hinge Fendt
Hinge pin rear screen hinge Fendt
€4,72 €3,90
 
GRANIT Pin for rear window handle Fendt
5%
GRANIT
Pin for rear window handle Fendt
€55,60 €45,95 €52,80 €43,64
 
GRANIT Push rod Fendt Farmer 306-309, Fendt 309-313
5%
GRANIT
Push rod Fendt Farmer 306-309, Fendt 309-313
€518,00 €428,10 €492,10 €406,69
 
GRANIT Spacer pipe three-point 15 x 10 x 13,6 mm Fendt Farmer, Favorit
GRANIT
Spacer pipe three-point 15 x 10 x 13,6 mm Fendt Farmer, Favorit
A: 15 mm. B: 10 mm. C: 13,6 mm.
€2,15 €1,78
 
GRANIT Bellows lift cylinder Fendt
5%
GRANIT
Bellows lift cylinder Fendt
€81,20 €67,11 €77,10 €63,72
 
GRANIT Bush DW hydraulic cylinder 28 x 32 x 35 mm Fendt
GRANIT
Bush DW hydraulic cylinder 28 x 32 x 35 mm Fendt
Dimensions: 28 x 32 x 35 mm.
€25,40 €20,99
 
GRANIT Adjusting nut for lower link strut M22 x 2,5 mm Fendt
5%
GRANIT
Adjusting nut for lower link strut M22 x 2,5 mm Fendt
Dimensions: Thread = M22 x 2.5 mm.
€47,67 €39,40 €45,25 €37,40
 
Showing 193 - 216 of 437

Fendt 312 Vario Typ 325 parts

If your 312 Vario carries Typ 325 on its plate, this page shows exactly what suits that version: more than 400 parts, with anything that belongs only on another 312 Vario left out. It runs from work lights through to the bushes and pins in the pivots.

Lights for long days

Working late into autumn evenings means a good part of the day is spent under work lights. For the Typ 325 there are LED work lights from HELLA and other makers, plus holders to mount them on the cab or mudguards. Rotating beacons are here too, along with the spring for the beacon holder.

When you replace a work light, look at the holder as well. A cracked or shaken-loose holder lets the lamp bounce over every bump, and that vibration takes its toll on the lamp and the wiring. Mount the new light on a solid holder, tighten it properly and route the cable so it does not rub on a sharp edge.

Switches and controls

In the cab of the Typ 325 there are push button switches, such as the red hazard light switch with a lock, rocker switches and rotary potentiometers. If a switch stops working, check the plug behind the panel before replacing the part. There are also handles, gas struts for the windscreen frame and rubber floor mats.

Do not underestimate a loose handle. You climb in and out many times a day, often with muddy boots, and that handle is the one thing you are holding on to. If it wobbles or the plastic has cracked, replace it before it gives way under your weight.

Pivots, seals and the trailer

  • bushes for linkage joints, which also suit a number of Massey Ferguson tractors
  • pins for hinges and pivots
  • seals for the engine and hydraulics
  • springs for the mudguards
  • Wabco coupling heads with the cover that closes them

If you are working on a pivot anyway, replace the bush and pin as a pair. A new pin in a bush that has worn oval will have play again before long.

Other versions and related tractors

If you are not certain it is a Typ 325, the Fendt 312 Vario page shows all versions together. The other versions each have their own page: Typ 339, Typ 349 and Typ 352. When in doubt, the reference number on the old part is the surest check.

From the Fendt 300, the 309 Vario, 310 Vario, 311 Vario, 313 Vario and 314 Vario also have pages of their own. Work lights, switches and cab parts are often the same across the range. The overview of the whole brand is at Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart