Menu
EUR

Fendt 411 Vario tractor parts & technical data

Fendt 411 Vario owners will find more than 500 parts on this page, covering the Fendt 400 series model with lighting, electrics, trailer couplings and more.

529 parts found for Fendt 411 Vario
Show:
GRANIT Connection cable 2,5 m
GRANIT
Length: 2.5 m. Reference no.: 1762625. More
Length: 2.5 m. Reference no.: 1762625.
€79,73 €65,89 €75,70 €62,56
You save 5%
Connecting rod bearing undersize, 69,75 mm Fendt, Lamborghini
€50,14 €41,44 €47,60 €39,34
You save 5%
GRANIT Hand pump M16 x 1,5 Fendt, John Deere, Case IH, Fiat, Deutz-Fahr, Linde
GRANIT
Version: M16 x 1.5. Thread: M16 x 1.5. More
Version: M16 x 1.5. Thread: M16 x 1.5.
€13,80 €11,41
GRANIT Radiator hose to the expansion tank inner-Ø 9,5 mm, 500 mm Fendt
GRANIT
Inner Ø: 9,5 mm. Length: 500 mm. More
Inner Ø: 9,5 mm. Length: 500 mm.
€32,35 €26,74
GRANIT Adaptor water pump - cylinder head Ø 27 x 40 x 34 mm Fendt
GRANIT
Dimensions: Ø 27 x 40 x 34 mm. More
Dimensions: Ø 27 x 40 x 34 mm.
€7,00 €5,79
Injector Hürlimann, Lamborghini, Same
€639,18 €528,25 €607,20 €501,82
You save 5%
O-clamp set 8001102, FS19950, WK1070X
€32,28 €26,68 €30,65 €25,33
You save 5%
GRANIT Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€64,52 €53,32 €61,25 €50,62
You save 5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
You save 5%
GRANIT Belt kit 1800 mm, 8 ribs Fendt
GRANIT
Contents: Belt tensioner and belt. Belt length: 1800 mm. Ribs: 8 n. More
Contents: Belt tensioner and belt. Belt length: 1800 mm. Ribs: 8 n.
€523,70 €432,81
Handle Fendt, Case IH
€39,20 €32,40 €37,20 €30,74
You save 5%
GRANIT Bush DW hydraulic cylinder 28 x 32 x 35 mm Fendt
GRANIT
Dimensions: 28 x 32 x 35 mm. More
Dimensions: 28 x 32 x 35 mm.
€25,40 €20,99
GRANIT Clamping bush for lower links 29 x 36 x 27,5 mm Fendt
GRANIT
Dimensions: 29 x 36 x 27.5 mm. More
Dimensions: 29 x 36 x 27.5 mm.
€24,95 €20,62
Hydraulic top link cat. 3, 640 - 876 mm, stroke 236 mm, 11 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 876 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Adjustab... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 876 mm. Piston rod Ø D: 45 m...
€658,30 €544,05 €625,35 €516,82
You save 5%
Windshield frame shock absorber 250 N, 600 mm, ball socket 10 mm Fendt
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: windscreen. Menke no.: 54807. More
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 ...
€37,58 €31,06 €35,70 €29,50
You save 5%
GRANIT Sliding block hood Fendt
€32,73 €27,05 €31,00 €25,62
You save 5%
Hook lock hood Fendt
Spring right fender Fendt, Massey Ferguson
Version: Suitable for Fendt pivoting mudguards. More
Version: Suitable for Fendt pivoting mudguards.
€36,40 €30,08
ROCKINGER Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Colour: AGCO grey. Description: Ball hitch wit... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.394,15 €1.152,19 €1.067,51 €882,24
You save 23%
GRANIT Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
€159,52 €131,83 €144,30 €119,26
You save 10%
Showing 217 - 240 of 529

Fendt 411 Vario parts for the cab, lighting and starting

There is more going on around the cab of a Fendt 411 Vario than you might think. A gas strut that no longer holds the windscreen open, a snapped handle or a hazard light switch that will not latch are small things you run into every day. This page holds more than 500 parts for the 411 Vario, from GRANIT and from brands such as HELLA, Wabco, Scharmüller and PROBOSS.

Besides those gas struts, body handles and push button switches there are rotary potentiometers for the controls, sensors, pins, springs and seals, including the O-ring for the tank cap. At the rear you will find drawbars and connector heads for the brake line to the trailer.

Work lights and beacons

Working on into the dark in winter or at harvest calls for good light. For the 411 Vario there are LED work lights with a spot beam, the brackets and holders to mount them and beacons for the cab roof. If you swap old halogen work lights for LED, make sure the bracket is stiff enough and the lamp does not vibrate. A lamp on a flimsy bracket shakes itself apart and ends up lighting the sky instead of the job.

When the starter only clicks

There are starter motors for this Fendt, but a few checks before ordering can save you the trouble. A starter that only clicks or turns slowly is often just short of current. Charge the battery fully and test it, clean the terminals and check the earth cable between engine and chassis. The thin control wire to the solenoid on the starter can also be loose or corroded. Only when all of that is in order and it still will not crank properly is the starter itself to blame. Disconnect the negative battery terminal first when you replace it.

The right part and the rest of the 400 series

Start with the type plate on the tractor, which gives the type and serial number. After that the old part often settles it, since starter motors, sensors and switches carry a reference number you can hold against the new one.

The 411 Vario is part of the Fendt 400 series. If you also run a larger type from that range, its parts are on a page of its own: Fendt 412 Vario, Fendt 413 Vario, Fendt 414 Vario and Fendt 415 Vario. Working on a different Fendt as well? Browse Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart