Menu
EUR

Fendt 411 Vario tractor parts & technical data

Fendt 411 Vario owners will find more than 500 parts on this page, covering the Fendt 400 series model with lighting, electrics, trailer couplings and more.

529 parts found for Fendt 411 Vario
Show:
GRANIT Pin for lifting strut bottom 28 x 112 mm Fendt
5%
GRANIT
Pin for lifting strut bottom 28 x 112 mm Fendt
Dimensions: 28 x 112 mm.
€61,36 €50,71 €58,25 €48,14
 
GRANIT Gas strut door or hood 250 N, 325 mm Fendt
10%
GRANIT
Gas strut door or hood 250 N, 325 mm Fendt
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 mm. C: 10 mm...
€41,19 €34,04 €37,25 €30,79
 
GRANIT Compression spring hood Fendt
GRANIT
Compression spring hood Fendt
€2,51 €2,07
 
GRANIT Retaining plate hood right Fendt
10%
GRANIT
Retaining plate hood right Fendt
€41,24 €34,08 €37,30 €30,83
 
Retaining cam side cover hood Fendt
Retaining cam side cover hood Fendt
€10,35 €8,55
 
Fender extension left Fendt
Fender extension left Fendt
€122,45 €101,20
 
GRANIT Pivot left Fendt 411-415
5%
GRANIT
Pivot left Fendt 411-415
€571,12 €472,00 €542,55 €448,39
 
Pivot right Fendt 411-415
10%
Pivot right Fendt 411-415
€599,68 €495,60 €542,55 €448,39
 
GRANIT Base plate fender Fendt 411-415
5%
GRANIT
Base plate fender Fendt 411-415
€106,61 €88,11 €101,25 €83,68
 
Holder for chock Fendt
Holder for chock Fendt
€32,50 €26,86
 
Tension spring three-point Fendt
Tension spring three-point Fendt
€3,94 €3,26
 
GRANIT Spring guide
GRANIT
Spring guide
Brand: Fendt.
€29,75 €24,59
 
Holder
10%
Holder
Brand: Fendt.
€129,59 €107,10 €117,20 €96,86
 
Walterscheid Flange hitch manual 31 mm, 140 x 80 mm, M17, 2000 kg, 82,4 kN
21%
Walterscheid
Flange hitch manual 31 mm, 140 x 80 mm, M17, 2000 kg, 82,4 kN
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 82...
€772,46 €638,40 €606,90 €501,57
 
GRANIT Leaf spring for roof panel for Fendt
GRANIT
Leaf spring for roof panel for Fendt
€17,00 €14,05
 
GRANIT Oil pressure switch hydraulics ventielblok 8 bar
GRANIT
Oil pressure switch hydraulics ventielblok 8 bar
Version: Valve block, 8 bar. Menke no.: 208167.
€153,10 €126,53
 
Oil pressure switch engine oil pressure with plug connection
10%
Oil pressure switch engine oil pressure with plug connection
Version: Engine oil pressure switch, Plug connection.
€36,41 €30,09 €32,90 €27,19
 
Sensor steering angle front axle
10%
Sensor steering angle front axle
Version: Steering angle sensor.
€365,78 €302,30 €330,90 €273,47
 
Push button switch lift 12 - 16 V, button blue, make contact, Ø 30 mm
Push button switch lift 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button tr...
€28,45 €23,51
 
Push button switch ventielaansturing min 48 V, black button, Ø 30 mm
5%
Push button switch ventielaansturing min 48 V, black button, Ø 30 mm
Version: 48 V switching voltage, Black button, make contact, Total button travel...
€35,48 €29,32 €33,70 €27,85
 
GRANIT Toothed quadrant heating for control / operation
GRANIT
Toothed quadrant heating for control / operation
Version: For control/operation.
€10,20 €8,43
 
Knob for blower switch
Knob for blower switch
Version: For blower switch.
€9,20 €7,60
 
Drive switch rocker switch orange, manual foot operation
Drive switch rocker switch orange, manual foot operation
Version: Foot/hand operation (toggle switch).
€32,00 €26,45
 
Direction switch forwards and forwards, orange rocker switch
Direction switch forwards and forwards, orange rocker switch
Version: Forwards and backwards, orange (toggle switch). Menke no.: 209946.
€118,55 €97,98
 
Showing 457 - 480 of 529

Fendt 411 Vario parts for the cab, lighting and starting

There is more going on around the cab of a Fendt 411 Vario than you might think. A gas strut that no longer holds the windscreen open, a snapped handle or a hazard light switch that will not latch are small things you run into every day. This page holds more than 500 parts for the 411 Vario, from GRANIT and from brands such as HELLA, Wabco, Scharmüller and PROBOSS.

Besides those gas struts, body handles and push button switches there are rotary potentiometers for the controls, sensors, pins, springs and seals, including the O-ring for the tank cap. At the rear you will find drawbars and connector heads for the brake line to the trailer.

Work lights and beacons

Working on into the dark in winter or at harvest calls for good light. For the 411 Vario there are LED work lights with a spot beam, the brackets and holders to mount them and beacons for the cab roof. If you swap old halogen work lights for LED, make sure the bracket is stiff enough and the lamp does not vibrate. A lamp on a flimsy bracket shakes itself apart and ends up lighting the sky instead of the job.

When the starter only clicks

There are starter motors for this Fendt, but a few checks before ordering can save you the trouble. A starter that only clicks or turns slowly is often just short of current. Charge the battery fully and test it, clean the terminals and check the earth cable between engine and chassis. The thin control wire to the solenoid on the starter can also be loose or corroded. Only when all of that is in order and it still will not crank properly is the starter itself to blame. Disconnect the negative battery terminal first when you replace it.

The right part and the rest of the 400 series

Start with the type plate on the tractor, which gives the type and serial number. After that the old part often settles it, since starter motors, sensors and switches carry a reference number you can hold against the new one.

The 411 Vario is part of the Fendt 400 series. If you also run a larger type from that range, its parts are on a page of its own: Fendt 412 Vario, Fendt 413 Vario, Fendt 414 Vario and Fendt 415 Vario. Working on a different Fendt as well? Browse Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart