Menu
EUR

Fendt 411 Vario tractor parts & technical data

Fendt 411 Vario owners will find more than 500 parts on this page, covering the Fendt 400 series model with lighting, electrics, trailer couplings and more.

529 parts found for Fendt 411 Vario
Show:
Bush for force sensor pin 37 x 45/54 x 44 mm Fendt, Massey Ferguson
5%
Bush for force sensor pin 37 x 45/54 x 44 mm Fendt, Massey Ferguson
Dimensions: 37 x 45/54 x 44 mm.
€75,14 €62,10 €71,35 €58,97
 
Pin lift cylinder/lift arm 40 x 104 mm Fendt
5%
Pin lift cylinder/lift arm 40 x 104 mm Fendt
Dimensions: 40 x 104 mm.
€92,12 €76,13 €87,50 €72,31
 
Wiper motor 12 V, 104°, A 61,5 mm Fendt, John Deere
5%
Wiper motor 12 V, 104°, A 61,5 mm Fendt, John Deere
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45.
€201,51 €166,54 €191,40 €158,18
 
Sauermann Automatic coupling 311 mm, coupling pin 31 mm, 2000 kg, 84,3 kN
5%
Sauermann
Automatic coupling 311 mm, coupling pin 31 mm, 2000 kg, 84,3 kN
Rail width: 312 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 32 ...
€886,33 €732,50 €842,00 €695,87
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
GRANIT Blind cover for headlight panel Fendt
GRANIT
Blind cover for headlight panel Fendt
€34,65 €28,64
 
Level switch coolant expansion tank
Level switch coolant expansion tank
Version: Filling level indicator: cooling water expansion tank.
€117,55 €97,15
 
Potentiometer clutch pedal and gear lever
10%
Potentiometer clutch pedal and gear lever
Version: Clutch pedal (position) and gear shift (driving range detection level 1...
€132,78 €109,74 €120,10 €99,26
 
GRANIT Potentiometer with rotary function foot operation speed control
GRANIT
Potentiometer with rotary function foot operation speed control
Version: Foot operation for speed adjustment. Menke no.: 210164.
€243,00 €200,83
 
Potentiometer linkage
Potentiometer linkage
Version: For lifting unit.
€372,55 €307,89
 
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
10%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
 
GRANIT Sensor sensor - engine speed, connection cable with plug Agrotron
5%
GRANIT
Sensor sensor - engine speed, connection cable with plug Agrotron
Version: Sensor - engine speed, Connection cable with plug.
€141,29 €116,77 €134,20 €110,91
 
Symbol rear work light black / white
Symbol rear work light black / white
Version: Black/white, rear work light.
€6,95 €5,74
 
Start switch 12 V / 24 V, lock 14603-2 keys
5%
Start switch 12 V / 24 V, lock 14603-2 keys
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, 58, 0: off...
€54,66 €45,17 €51,90 €42,89
 
Push button switch lower 12 - 16 V, button blue, make contact, Ø 30 mm
Push button switch lower 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button tr...
€19,55 €16,16
 
Push button switch work light, top 12 / 24 V, button green, Ø 30 mm
Push button switch work light, top 12 / 24 V, button green, Ø 30 mm
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals 6.3 x 0.8 ...
€33,00 €27,27
 
GRANIT LED rear light, left / right Ø 140 x 50 mm, 12 / 24 V
10%
GRANIT
LED rear light, left / right Ø 140 x 50 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Installation location: Left/right. Bulb: LED. Bulbs ...
€57,97 €47,91 €52,40 €43,31
 
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
10%
GRANIT
Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Lig...
€51,14 €42,26 €46,25 €38,22
 
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€139,80 €115,54
 
GRANIT Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
GRANIT
Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm....
€6,60 €5,45
 
GRANIT Spring for rotating beacon holder
GRANIT
Spring for rotating beacon holder
€13,40 €11,07
 
GRANIT LED work lights spotlight 18 W, 1200 lm, 120 x 104 x 81 mm, 12 / 24 V
10%
GRANIT
LED work lights spotlight 18 W, 1200 lm, 120 x 104 x 81 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 10 - 30 | Bulb: LED | Bulbs in...
€101,00 €83,47 €91,35 €75,50
 
Showing 145 - 168 of 529

Fendt 411 Vario parts for the cab, lighting and starting

There is more going on around the cab of a Fendt 411 Vario than you might think. A gas strut that no longer holds the windscreen open, a snapped handle or a hazard light switch that will not latch are small things you run into every day. This page holds more than 500 parts for the 411 Vario, from GRANIT and from brands such as HELLA, Wabco, Scharmüller and PROBOSS.

Besides those gas struts, body handles and push button switches there are rotary potentiometers for the controls, sensors, pins, springs and seals, including the O-ring for the tank cap. At the rear you will find drawbars and connector heads for the brake line to the trailer.

Work lights and beacons

Working on into the dark in winter or at harvest calls for good light. For the 411 Vario there are LED work lights with a spot beam, the brackets and holders to mount them and beacons for the cab roof. If you swap old halogen work lights for LED, make sure the bracket is stiff enough and the lamp does not vibrate. A lamp on a flimsy bracket shakes itself apart and ends up lighting the sky instead of the job.

When the starter only clicks

There are starter motors for this Fendt, but a few checks before ordering can save you the trouble. A starter that only clicks or turns slowly is often just short of current. Charge the battery fully and test it, clean the terminals and check the earth cable between engine and chassis. The thin control wire to the solenoid on the starter can also be loose or corroded. Only when all of that is in order and it still will not crank properly is the starter itself to blame. Disconnect the negative battery terminal first when you replace it.

The right part and the rest of the 400 series

Start with the type plate on the tractor, which gives the type and serial number. After that the old part often settles it, since starter motors, sensors and switches carry a reference number you can hold against the new one.

The 411 Vario is part of the Fendt 400 series. If you also run a larger type from that range, its parts are on a page of its own: Fendt 412 Vario, Fendt 413 Vario, Fendt 414 Vario and Fendt 415 Vario. Working on a different Fendt as well? Browse Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart