Menu
EUR

Fendt 712 Vario tractor parts & technical data

Lighting, electrics and trailer couplings head the list for the Fendt 712 Vario. Browse more than 550 parts for this Fendt 700 series tractor on one page.

586 parts found for Fendt 712 Vario
Show:
Door lock, right Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€54,86 €45,34 €52,10 €43,06
You save 5%
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€36,24 €29,95 €34,40 €28,43
You save 5%
Clevis joint head cat. 3, A 32 mm, d1 28 mm, L 63 mm
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 mm. Menke no.: 55291. More
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 ...
€85,18 €70,40 €80,90 €66,86
You save 5%
GRANIT Spindle three-point Fendt
€209,31 €172,98 €198,80 €164,30
You save 5%
GRANIT Adjusting nut for lower link strut M27 x 3 Fendt
GRANIT
Dimensions: Thread = M27 x 3 mm. More
Dimensions: Thread = M27 x 3 mm.
€56,48 €46,68 €53,65 €44,34
You save 5%
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system. Voltage: 12 V. Connection type: 2 x 6,3. Operating mode: electric. More
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system...
€35,71 €29,51 €32,30 €26,69
You save 10%
GRANIT Hydraulic top link cat. 3, 690 - 956 mm, stroke 266 mm, 11 ton
GRANIT
A cat.: 3 / 32. B cat.: 3 / 32. F: 690 / 956 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Adjustab... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 690 / 956 mm. Piston rod Ø D: 45 m...
€693,91 €573,48 €659,20 €544,79
You save 5%
GRANIT Top link cat. 2, M30 x 3,5, 515 - 755 mm, hook/threaded spindle
GRANIT
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515 / 755 mm. E: 75 mm. H: 51 mm. Version: Standard. Type: Tail hook/ball joint. To... More
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515...
€175,33 €144,90 €158,60 €131,07
You save 10%
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
Headlight panel right Fendt
Headlight panel left Fendt
Intermediate part for fender 145 mm Fendt
Dimensions: 145 mm. More
Dimensions: 145 mm.
€334,91 €276,79 €303,00 €250,41
You save 10%
GRANIT Extension right 155 mm Fendt Favorit 816-926, 712-930
GRANIT
Dimensions: 155 mm. More
Dimensions: 155 mm.
€421,50 €348,35
Intermediate part for 160 mm Fendt 712-930
Dimensions: 160 mm. More
Dimensions: 160 mm.
€619,15 €511,69
GRANIT Detent linkage Fendt
€25,55 €21,12
GRANIT Circlip grille hood Fendt
€1,96 €1,62
GRANIT Circlip hood Fendt
€1,21 €1,00
Showing 337 - 360 of 586

Fendt 712 Vario parts for servicing, lighting and the cab

Keeping a 712 Vario on the road is as much about small failures as big repairs: a work lamp that flickers, a gas strut that no longer holds the windscreen open, or a switch on the console that has stopped responding. This page brings together more than 550 parts that fit the Fendt 712 Vario, from a full service kit down to a single spring.

Servicing by operating hours

For scheduled services there are service kits matched to the 1000, 5000 and 7000 hour intervals, so the filters and small parts for that service arrive together instead of being ordered one by one. You will also find O-rings, for example for the tank, and seals such as the one for the tank sensors. Always fit a new seal when a sensor comes out, even if the old one looks fine, because a reused seal tends to draw air or let diesel seep after a few warm days.

Electrics and lighting

  • Work lamps and headlights, including HELLA, with holders and brackets to mount them
  • Beacons for road work
  • Push button switches, such as the hazard light switch
  • Potentiometers
  • Starter motors

When the Vario throws a fault code for a lever or the linkage, a worn potentiometer is a common cause. Note the position the old one was fitted in, or take a photo before removing it. After fitting a new one, the function concerned on a Fendt usually has to be recalibrated through the tractor menu, or the fault stays active and the function does not behave as expected.

Cab fittings and small parts

For the cab there are gas struts for the windscreen, handles for the body panels and velour floor mats, plus pins and springs. Alongside GRANIT, parts come from Wabco, Walterscheid and Scharmüller, covering things like air brake components and the hitch. A new windscreen strut goes in with the piston rod pointing down, which keeps its internal seal lubricated.

Choosing the correct part

Check the type plate to confirm it is a 712 Vario and make a note of the serial number. Electrical parts and seals usually carry a reference number that you can compare with the number on the product. With lamps, the mounting matters as well: a work lamp with a different base will not sit in the old position without a matching holder.

Other tractors in the Fendt 700 series

If you also run a larger Fendt from the same series, each model has its own page: the Fendt 714 Vario, Fendt 716 Vario, Fendt 718 Vario, Fendt 720 Vario, Fendt 722 Vario and Fendt 724 Vario. That way you see per tractor what actually fits. The complete brand range is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart