Menu
EUR

Fendt 712 Vario tractor parts & technical data

Lighting, electrics and trailer couplings head the list for the Fendt 712 Vario. Browse more than 550 parts for this Fendt 700 series tractor on one page.

586 parts found for Fendt 712 Vario
Show:
GRANIT Vibration damper radiator Fendt
Guide lower Fendt Farmer 307 (Typ 117), Xylon 524
€173,09 €143,05 €164,40 €135,87
You save 5%
Velour floor mat gray with engine brake Fendt 309 (Typ 322) - 724 (Typ 765)
Material: Velour. Colour: Grey. Type: Fendt 300/500/700 Vario series. Technical data: • Tufted velour with waterproof non-slip backing • Material:... More
Material: Velour. Colour: Grey. Type: Fendt 300/500/700 Vario series. ...
€88,54 €73,17 €84,10 €69,50
You save 5%
Sauermann Automatic coupling 311 mm, coupling pin 31 mm, 2000 kg, 84,3 kN
Sauermann
Rail width: 312 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 32 mm. Load capacity: 2000 kg. D-value: 84,3 kN. Colour: AGCO grey. More
Rail width: 312 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€886,33 €732,50 €842,00 €695,87
You save 5%
ROCKINGER Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.406,44 €1.162,35 €1.076,90 €890,00
You save 23%
GRANIT Mirror holder long 472-733 x 27,5 mm, rod Ø 22 mm Fendt
GRANIT
Dimensions: 472 - 733 x 27.5 mm. Rod Ø: 22 mm. More
Dimensions: 472 - 733 x 27.5 mm. Rod Ø: 22 mm.
€201,95 €166,90 €191,85 €158,55
You save 5%
Vervangingsspiegel wide angle Fendt 309 (Typ 322), Katana 850 (Typ 659)
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€28,25 €23,35
GRANIT Solenoid switch operation foot brake 42 V, 0,5 A, plug connection
GRANIT
Version: 42 V 0.5 A, 10W / VA, Plug connection. Menke no.: 210029. More
Version: 42 V 0.5 A, 10W / VA, Plug connection. Menke no.: 210029.
€56,65 €46,82
VDO Temperature switch, oil temperature 94 °C, M14 x 1,5, 6 - 24 V
VDO
Version: Temperature switching point: 94°C ± 3°C, Thread: M14 x 1.5, Contact closes as the temperature increases, Outlet: 1-pin via earth, Switchin... More
Version: Temperature switching point: 94°C ± 3°C, Thread: M14 x 1.5...
€78,18 €64,61 €70,70 €58,43
You save 10%
Potentiometer clutch pedal and gear lever
Version: Clutch pedal (position) and gear shift (driving range detection level 1 or 2). More
Version: Clutch pedal (position) and gear shift (driving range detecti...
€132,78 €109,74 €120,10 €99,26
You save 10%
Knob for control unit - heater
Version: For control unit - heater. More
Version: For control unit - heater.
€14,95 €12,36
HELLA Work lamp flood beam H3 55 W, 110 x 120 x 106 mm, 12 / 24 V, left
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Left. Dimensions W x H x D: 110 x 120 x 106 mm. Mountin... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€61,40 €50,74
Replacement cover beacon
€33,12 €27,37 €31,45 €25,99
You save 5%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€90,28 €74,61 €81,65 €67,48
You save 10%
HELLA Headlight left / right 12 V, R2, Ø 180 mm, built-in
HELLA
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 180 mm. Form: Round. Inner Ø: 144,5 mm. Material: Plastic, diffusing lens: glass... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 1...
€114,00 €94,21
GRANIT Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, without bracket
GRANIT
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, With hazard warning light function, Without bracket. More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, With hazard warnin...
€88,45 €73,10 €84,00 €69,42
You save 5%
VDO Sensor switch M14 x 1,5, +40 - +120 °C, 2-pin
VDO
Connection: 6.3 x 0.8 mm | Thread: M14 x 1.5 | Version: Temperature measuring range: +40°C to +120°C Thread: M14 x 1.5 Resistance values: 100°C = 4... More
Connection: 6.3 x 0.8 mm | Thread: M14 x 1.5 | Version: Temperature me...
€122,21 €101,00 €116,00 €95,87
You save 5%
GRANIT Seal kit hydraulic pump G297941010010 Fendt, Massey Ferguson
€84,70 €70,00 €80,45 €66,49
You save 5%
Bosch/Rexroth Triple pump 16 + 11 cm³, right Fendt 711 - 820
Bosch/Rexroth
Direction of rotation: Right | Output volume (cc/rev): 16 + 11 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Direction of rotation: Right | Output volume (cc/rev): 16 + 11 | Drive...
€2.020,10 €1.669,50 €1.827,70 €1.510,50
You save 10%
Bosch/Rexroth Hydraulic pump 60 cm³, as 1" 15Z 16/32 DP, right, Fendt
Bosch/Rexroth
Output volume (cc/rev): 60 | Drive shaft: Splined shaft 1"", 15 splines, 16/32 DP | Direction of rotation: Right More
Output volume (cc/rev): 60 | Drive shaft: Splined shaft 1"", 15 spline...
€3.369,69 €2.784,87 €3.048,75 €2.519,63
You save 10%
Showing 73 - 96 of 586

Fendt 712 Vario parts for servicing, lighting and the cab

Keeping a 712 Vario on the road is as much about small failures as big repairs: a work lamp that flickers, a gas strut that no longer holds the windscreen open, or a switch on the console that has stopped responding. This page brings together more than 550 parts that fit the Fendt 712 Vario, from a full service kit down to a single spring.

Servicing by operating hours

For scheduled services there are service kits matched to the 1000, 5000 and 7000 hour intervals, so the filters and small parts for that service arrive together instead of being ordered one by one. You will also find O-rings, for example for the tank, and seals such as the one for the tank sensors. Always fit a new seal when a sensor comes out, even if the old one looks fine, because a reused seal tends to draw air or let diesel seep after a few warm days.

Electrics and lighting

  • Work lamps and headlights, including HELLA, with holders and brackets to mount them
  • Beacons for road work
  • Push button switches, such as the hazard light switch
  • Potentiometers
  • Starter motors

When the Vario throws a fault code for a lever or the linkage, a worn potentiometer is a common cause. Note the position the old one was fitted in, or take a photo before removing it. After fitting a new one, the function concerned on a Fendt usually has to be recalibrated through the tractor menu, or the fault stays active and the function does not behave as expected.

Cab fittings and small parts

For the cab there are gas struts for the windscreen, handles for the body panels and velour floor mats, plus pins and springs. Alongside GRANIT, parts come from Wabco, Walterscheid and Scharmüller, covering things like air brake components and the hitch. A new windscreen strut goes in with the piston rod pointing down, which keeps its internal seal lubricated.

Choosing the correct part

Check the type plate to confirm it is a 712 Vario and make a note of the serial number. Electrical parts and seals usually carry a reference number that you can compare with the number on the product. With lamps, the mounting matters as well: a work lamp with a different base will not sit in the old position without a matching holder.

Other tractors in the Fendt 700 series

If you also run a larger Fendt from the same series, each model has its own page: the Fendt 714 Vario, Fendt 716 Vario, Fendt 718 Vario, Fendt 720 Vario, Fendt 722 Vario and Fendt 724 Vario. That way you see per tractor what actually fits. The complete brand range is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart