Menu
EUR

Fendt 716 Vario tractor parts & technical data

Here you will find more than 700 parts that fit the Fendt 716 Vario. Groups such as lighting, electrics and trailer couplings help you narrow down your search.

747 parts found for Fendt 716 Vario
Show:
GRANIT Solenoid switch start interlock 42 V, 0,5 A, cable, connector
GRANIT
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug. More
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug.
€57,17 €47,25 €54,30 €44,88
You save 5%
Contact switch idle plunger switch, plug connector blue
Version: Plug connection, blue. More
Version: Plug connection, blue.
€68,10 €56,28
GRANIT Contact switch start interlock mechanical, connector plug green
GRANIT
Version: Mechanical, connector plug green. Menke no.: 210039. More
Version: Mechanical, connector plug green. Menke no.: 210039.
€86,65 €71,61
GRANIT Hall sensor rear PTO shaft
GRANIT
Version: Rear PTO shaft. More
Version: Rear PTO shaft.
€206,20 €170,41
VDO Seal for tank sensor
€16,70 €13,80
GRANIT Tank sender 12 volt
€588,75 €486,57
GRANIT Tank sender level indicator, hydraulic tank
GRANIT
Version: Level indicator, hydraulic tank. More
Version: Level indicator, hydraulic tank.
€168,47 €139,23 €160,00 €132,23
You save 5%
GRANIT Tank sender suction pipe
GRANIT
Version: Suction pipe. More
Version: Suction pipe.
€135,40 €111,90 €128,60 €106,28
You save 5%
Pressure sensor 3-pin, thread M14 x 1,5
Version: 3-pin. Thread: M14 × 1.5. More
Version: 3-pin. Thread: M14 × 1.5.
€36,41 €30,09 €32,90 €27,19
You save 10%
GRANIT Pressure switch
€32,00 €26,45
Pressure switch air pressure system, mounting on air tank
Version: Mounting: on the compressed air tank. More
Version: Mounting: on the compressed air tank.
€218,40 €180,50
Temperature sensor EGR module engine TTCD 6.1 L06
Description: At exhaust gas cooler. More
Description: At exhaust gas cooler.
€115,15 €95,17 €104,15 €86,07
You save 10%
Temperature sensor on katalysator
Description: At catalytic converter. More
Description: At catalytic converter.
€184,89 €152,80 €175,60 €145,12
You save 5%
Direction switch steering wheel mounting, stuurwielverstelling
Version: Function: forwards and backwards and steering wheel adjustment. More
Version: Function: forwards and backwards and steering wheel adjustmen...
€549,45 €454,09
GRANIT Push button switch PTO shaft 12 - 16 V, button yellow, make contact, Ø 30 mm
GRANIT
Version: 12 - 16 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustp... More
Version: 12 - 16 V switching voltage, Yellow button, make contact, Tot...
€39,87 €32,95 €36,00 €29,75
You save 10%
Push button switch air conditioning heating with cable and plug
Version: Switch with cable and connecting plug. More
Version: Switch with cable and connecting plug.
€60,10 €49,67
GRANIT Control panel button board neutrale switch, driving range
GRANIT
Version: Neutral switch, driving range Mounting board with connection cable. More
Version: Neutral switch, driving range Mounting board with connection ...
€184,85 €152,77
HELLA LED number plate light 12 V, 63 x 66,2 mm, black, blade terminal
HELLA Tail/brake light 12V21WK / P21W, Ø 66 x 52 mm, 12 V, left / right
HELLA
Dimensions W x H x D (mm): Ø 66 x 52 | Light function: Tail light/brake light | Bulb: 12V21WK / P21W 12V21/5WK / P21/5W | Bulbs included: Yes | Mount... More
Dimensions W x H x D (mm): Ø 66 x 52 | Light function: Tail light/bra...
€42,40 €35,04
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
SACEX
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 128 mm. Total height: 204 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€40,90 €33,80 €38,85 €32,11
You save 5%
HELLA LED tail/brake light, Ø 66 x 42,2 mm, 12 V, left / right
HELLA
Nominal voltage: 12 V. Installation location: Left/right. Bulb: LED. Bulbs included: Yes. Light function: Rear light, brake light. Colour: Lens: trans... More
Nominal voltage: 12 V. Installation location: Left/right. Bulb: LED. B...
€80,95 €66,90
GRANIT Light housing
€9,35 €7,73
HELLA Indicator front left / right 12V21WKG / PY21W, clear lens
HELLA
Bulb: 12V21WKG / PY21W. Colour: Lens: transparent. Attachment: Front. Form: Round. Installation location: Left/right/front. Nominal voltage: 12 / 24 V... More
Bulb: 12V21WKG / PY21W. Colour: Lens: transparent. Attachment: Front. ...
€26,45 €21,86
Cable set
€35,60 €29,42
Showing 481 - 504 of 747

Fendt 716 Vario parts for servicing, lighting and implements

When a 716 Vario is due for a service, the job starts with the service kits. They are grouped by the operating hours of the service, so you can pick the right kit for each interval. Around that, this page offers more than 700 Fendt 716 Vario parts, from work lights to starter motors, with makers such as GRANIT, HELLA, Wabco, Scharmüller and ROCKINGER.

Pin down your version first

The 716 Vario came in several versions, each with its own Typ number, which you will find on the tractor's type plate. Every Typ number has a separate page that shows only the parts for that version:

Not sure about the Typ number? Take the old part in hand. Starter motors, switches and many gaskets carry a reference number that you can compare with the details listed for the item.

What is available for the 716 Vario

For working after dark there are HELLA LED work lights, headlights and the holders and brackets that keep a lamp firmly in place. On the dashboard there are push button switches, for example for the hazard lights. For the cab you will find gas struts for the windscreen frame and grab handles for the bodywork.

At the rear there are drawbars from ROCKINGER and Scharmüller, hydraulic top links and pins for hitching implements. For the engine and hydraulics there are starter motors, seals, gaskets, O-rings and sealing rings, among them a water pump gasket and a seal for the fuel tank sender.

Practical note on the windscreen gas strut

If the opened windscreen slowly drifts shut, the gas strut has lost its charge. Replace it before the glass comes down on your head or hands. Fit the new strut with the piston rod pointing down, the way the old one sat. That keeps the seal inside the cylinder lubricated and the strut holds its force longer. Do not compress a new strut by hand to test it before fitting, as that does the seal no favours.

More from the Fendt 700

Alongside the 716 Vario, the other tractors in the 700 series have their own pages, each with the parts that belong to that model: Fendt 712 Vario, Fendt 714 Vario, Fendt 718 Vario, Fendt 720 Vario, Fendt 722 Vario and Fendt 724 Vario. If you run an older or different Fendt, start at Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart