Menu
EUR

Fendt 718 Vario (Typ 727) tractor parts & technical data

Running a Fendt 718 Vario with Typ 727? More than 550 parts for this version are listed here, including lighting, electrics and three-point linkage parts.

590 parts found for Fendt 718 Vario
Show:
Safety cable for linch pins rope 195 mm, Ø 3 mm, eye Ø 11 mm
Version: Rope. Total length: 195 mm. Chain Ø: 3 mm. Eyelet Ø: 11 mm. More
Version: Rope. Total length: 195 mm. Chain Ø: 3 mm. Eyelet Ø: 11 mm.
€14,85 €12,27
Scharmüller Hold-down 15° with adjustment screw Fendt
Scharmüller
Bending angle: 15°. Menke no.: 68325. More
Bending angle: 15°. Menke no.: 68325.
€207,08 €171,14 €190,51 €157,45
You save 8%
Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
€158,52 €131,01 €145,84 €120,53
You save 8%
Circlip grille hood Fendt
VDO Seal for tank sensor
€17,45 €14,42
Tank sender 12 volt
€588,76 €486,58
Pressure switch air pressure system, mounting on air tank
Version: Mounting: on the compressed air tank. More
Version: Mounting: on the compressed air tank.
€218,42 €180,51
Oil pressure switch hydraulics ventielblok 8 bar
Version: Valve block, 8 bar. Menke no.: 208167. More
Version: Valve block, 8 bar. Menke no.: 208167.
€153,13 €126,55
VDO Temperature switch, oil temperature 94 °C, M14 x 1,5, 6 - 24 V
VDO
Version: Temperature switching point: 94°C ± 3°C, Thread: M14 x 1.5, Contact closes as the temperature increases, Outlet: 1-pin via earth, Switchin... More
Version: Temperature switching point: 94°C ± 3°C, Thread: M14 x 1.5...
€77,70 €64,21 €71,48 €59,08
You save 8%
Potentiometer linkage
Version: For lifting unit. More
Version: For lifting unit.
€372,56 €307,90
Sensor sensor - engine speed, connection cable with plug Agrotron
Version: Sensor - engine speed, Connection cable with plug. More
Version: Sensor - engine speed, Connection cable with plug.
€147,44 €121,85 €135,64 €112,10
You save 8%
Coolant temperature sensor M12 x 1,5, wrench size 19 mm, 2-pin
Colour: Grey. Thread: M12 x 1.5. To fit: Including • IVECO. Technical data: - Number of connections: 2. AF: 19 mm. To fit as models: Including • I... More
Colour: Grey. Thread: M12 x 1.5. To fit: Including • IVECO. Technica...
€38,90 €32,15
Symbol rear work light black / white
Version: Black/white, rear work light. More
Version: Black/white, rear work light.
€7,28 €6,01
HELLA Rocker switch air conditioning 12 V / 24 V, 2 connections
HELLA
Version: Rocker operation: on/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 blade terminals. More
Version: Rocker operation: on/off switch, 12 V/24 V, power rating: 16 ...
€35,28 €29,15
Push button switch ventielaansturing min 48 V, black button, Ø 30 mm
Version: 48 V switching voltage, Black button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof a... More
Version: 48 V switching voltage, Black button, make contact, Total but...
€37,02 €30,60 €34,06 €28,15
You save 8%
Operating lever heating
Version: For heater. More
Version: For heater.
€11,68 €9,65
Control panel button board neutrale switch, driving range
Version: Neutral switch, driving range Mounting board with connection cable. More
Version: Neutral switch, driving range Mounting board with connection ...
€184,87 €152,79
HELLA Rear light Ø 140 x 80 mm, 12 / 24 V
HELLA
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/brake light/indicator light | Bulb: 12V21WK / P21W 12V5WK / R5W | Bulbs included: ... More
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/br...
€36,49 €30,16 €35,14 €29,04
You save 4%
Rear light Ø 140 x 80 mm, 12 / 24 V, right
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/brake light/indicator light | Bulb: 12V10WK / R10W 12V21WK / P21W | Bulbs included... More
Dimensions W x H x D (mm): Ø 140 x 80 | Light function: Tail light/br...
€35,51 €29,35
HELLA Magnetic holder for work lights with U-bracket or mounting plate
HELLA
To fit: Work light with U-bracket or mounting bracket (9XD 130 261-001). Additional information: • 2 magnets and fixings • U-bracket not included. More
To fit: Work light with U-bracket or mounting bracket (9XD 130 261-001...
€126,14 €104,25 €121,48 €100,39
You save 4%
HELLA Work lamp flood beam H3 70 W, 158 x 162 x 127 mm, 12 / 24 V
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 158 x 162 x 127 mm. Mo... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€79,42 €65,64 €76,48 €63,21
You save 4%
Work lamp H3 55 W, angular, glass 130 x 80 mm, upright, 12 V
Bulb: 12V55W / H3. Form: Rectangular. Additional information: With swivel bracket, without switch, glass protected by protruding housing made of impac... More
Bulb: 12V55W / H3. Form: Rectangular. Additional information: With swi...
€42,00 €34,71 €38,64 €31,93
You save 8%
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, 112 x 127 x 97 mm
HELLA
Bulb: H3. Connection: Open cable ends. Width: 112 mm. Form: Square. Height: 97 mm. Length: 102 mm. Material: Housing: plastic, diffusing lens: glass. ... More
Bulb: H3. Connection: Open cable ends. Width: 112 mm. Form: Square. He...
€46,59 €38,50 €44,86 €37,08
You save 4%
HELLA Headlight left / right 12 V, R2, Ø 180 mm, built-in
HELLA
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 180 mm. Form: Round. Inner Ø: 144,5 mm. Material: Plastic, diffusing lens: glass... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 1...
€118,44 €97,88 €114,07 €94,27
You save 4%
Push button switch lighting 12 / 24 V, green, Ø 30 mm
To fit as: Fendt Farmer 307 (Typ 117, 307), 308 (Typ 118, 308), 309 (Typ 119, 309), 310 (Typ 310), 311 (Typ 311), 312 (Typ 312), 409, 410, 411, 412 Fa... More
To fit as: Fendt Farmer 307 (Typ 117, 307), 308 (Typ 118, 308), 309 (T...
€38,60 €31,90
Wabco Connector head red supply line M16 x 1,5, vehicle
Wabco
Version: Red, supply line. Connection: M16 x 1.5. Operating pressure max.: 10.0 bar. Vehicle/application: Red, supply, towing vehicle. More
Version: Red, supply line. Connection: M16 x 1.5. Operating pressure m...
€30,40 €25,12
Wabco Cover antifreeze pump Fendt, Massey Ferguson, Case IH
€60,86 €50,30 €55,99 €46,27
You save 8%
Cap for connector head yellow
Version: Yellow. More
Version: Yellow.
€17,56 €14,51
Bleed valve M10 x 1 x 16 mm Fendt
Dimensions: M10 x 1 x 16 mm. To fit: 71706126. Version: Can be used for any vehicle. More
Dimensions: M10 x 1 x 16 mm. To fit: 71706126. Version: Can be used fo...
€45,90 €37,93 €43,98 €36,35
You save 4%
Shaft seal foot brake 70 x 95 x 12 mm Fendt, Massey Ferguson
Dimensions: 70 x 95 x 12 mm. More
Dimensions: 70 x 95 x 12 mm.
€72,58 €59,98 €66,77 €55,18
You save 8%
Starter ring gear Ø 393/364 mm, 129 teeth Fendt
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€81,40 €67,27 €74,89 €61,89
You save 8%
Borg Warner Cooling fan Ø 530 mm Fendt Favorit 712-718, 818
€294,07 €243,03 €247,37 €204,43
You save 16%
Borg Warner Fan clutch Fendt Favorit 714-716, Fendt 712-820
€704,16 €581,95 €592,35 €489,55
You save 16%
Radiator hose to the expansion tank inner-Ø 9,5 mm, 500 mm Fendt
Inner Ø: 9,5 mm. Length: 500 mm. More
Inner Ø: 9,5 mm. Length: 500 mm.
€33,76 €27,90
Rubber elbow heating / cab Ø 17 mm Fendt
€55,00 €45,45 €50,60 €41,82
You save 8%
Radiator hose of radiator up to reservoir Ø 8 mm, length 1500 mm Fendt
Inner Ø: 8 mm. Length: 1500 mm. More
Inner Ø: 8 mm. Length: 1500 mm.
€26,60 €21,98
Main bearing standard Ø 84 mm
€48,65 €40,21 €44,76 €36,99
You save 8%
Oil seal 72 x 90 x 10 mm Fendt Favorit 711-716, Fendt 711-820
Dimensions: 72 x 90 x 10 mm. More
Dimensions: 72 x 90 x 10 mm.
€37,82 €31,26 €34,79 €28,76
You save 8%
Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
€40,78 €33,70 €37,52 €31,01
You save 8%
Sealing washer 32 x 45 x 4 mm Fendt
Dimensions: 32 x 45 x 4 mm. More
Dimensions: 32 x 45 x 4 mm.
€8,91 €7,37
Pin for top link 25,4 x 140 mm Fendt
Dimensions: 25.4 x 140 mm. More
Dimensions: 25.4 x 140 mm.
€49,03 €40,52 €45,11 €37,28
You save 8%
Mirror holder long 472-733 x 27,5 mm, rod Ø 22 mm Fendt
Dimensions: 472 - 733 x 27.5 mm. Rod Ø: 22 mm. More
Dimensions: 472 - 733 x 27.5 mm. Rod Ø: 22 mm.
€210,73 €174,16 €193,87 €160,22
You save 8%
Showing 529 - 576 of 590

Fendt 718 Vario Typ 727 parts from cab to trailer

Getting in starts with the grab handle, and anyone climbing in and out of the cab dozens of times a day knows how quickly a handle works loose. It is one small example of what is available for the Fendt 718 Vario with Typ 727. This page lists more than 550 parts, every one of them intended for this particular version.

In and around the cab

There are grab handles for the cab and body panels, floor mats and gas struts, such as the strut that holds the front window frame up. For all round visibility there are LED work lights and headlights, with HELLA among the makers, rear lights and beacons with the holders and springs that go with them. Push button switches for the lights and potentiometers for the controls sit within reach of the seat. Farm tracks and yard surfaces shake every lamp hard, so at each service check that holders and springs are still tight.

Gas strut tip: if the front window frame no longer stays up, the strut has lost its pressure and cannot be repaired. Prop the frame before you undo the old strut so it cannot drop unexpectedly. Fit the new strut with the piston rod pointing down where possible, which keeps the internal seal lubricated and helps the strut hold its pressure for longer. Where there is a strut on each side, replace them as a pair, or the frame will be pulled out of line.

Starting and the trailer

For reliable starting there are starter motors. For the trailer brake line there are Wabco connector heads, and for hitching up there are parts from ROCKINGER and Scharmüller. Seals and O-rings, including the O-ring for the tank cap and the seal for the tank sensor, keep moisture out and oil and diesel in. A tank cap with a flattened O-ring shows itself as a damp ring around the filler neck.

Checking for Typ 727

The type plate carries the Typ number of the tractor. A plate showing Typ 727 confirms this 718 Vario page matches your machine. The other versions each have their own page:

The Fendt 718 Vario page shows every version together. If the plate is unreadable, take the reference number on the old part as your guide and compare it with the details shown for the item.

More from the Fendt 700

The other models in the Fendt 700 each have a page with their own parts as well: Fendt 712 Vario, Fendt 714 Vario, Fendt 716 Vario, Fendt 720 Vario, Fendt 722 Vario and Fendt 724 Vario. The rest of the Fendt line-up is covered on Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart