Menu
EUR

Fendt 720 Vario (Typ 741) tractor parts & technical data

Own a Fendt 720 Vario Typ 741 and there is no need to guess. The more than 300 parts here for lighting, electrics and trailer couplings are matched to it.

318 parts found for Fendt 720 Vario
Show:
Metal disc foot brake Fendt 714-724, Massey Ferguson 7719/S
€55,00 €45,45 €50,60 €41,82
You save 8%
Engine preheater connection thread M27 x 1,5 Fendt, Deutz-Fahr
Connection: Thread M27 x 1.5. More
Connection: Thread M27 x 1.5.
€417,25 €344,83 €383,87 €317,25
You save 8%
VICTOR REINZ Cylinder head gasket Fendt 714-724, 819-828
€255,81 €211,41 €235,35 €194,50
You save 8%
Borg Warner Fan clutch Fendt 714-724, Typ 738-743
€1.055,56 €872,36 €887,95 €733,84
You save 16%
Outlet valve Fendt
€44,91 €37,12 €41,32 €34,15
You save 8%
EGR module with EGR valve and diaphragm, engine TCD6.1L06
Description: Complete with EGR valve and diaphragm. More
Description: Complete with EGR valve and diaphragm.
€3.513,04 €2.903,34 €3.232,00 €2.671,07
You save 8%
Air hose to intercooler Fendt 714-724
€178,16 €147,24 €163,91 €135,46
You save 8%
NOX sensor after SCR catalytic converter after diesel particulate filter Fendt
Description: Before catalytic converter after diesel particulate filter. To fit: Fendt. Installation location: After SCR catalytic converter. More
Description: Before catalytic converter after diesel particulate filte...
€1.005,16 €830,71 €924,75 €764,25
You save 8%
Connecting rod bearing standard 70 mm
€41,83 €34,57 €38,48 €31,80
You save 8%
Cylinder head bolt M12 x 162 mm engine TCD3.6L04-TTCD6.1L06
Dimensions: M12 x 162 mm. More
Dimensions: M12 x 162 mm.
€24,99 €20,65
Water pump gasket Fendt
V-belt tensioner water pump Ø 70 mm, width 38 mm, Fendt 512-939
Outer Ø: 70 mm. Width: 38 mm. More
Outer Ø: 70 mm. Width: 38 mm.
€312,68 €258,41 €287,67 €237,74
You save 8%
Tank cap reservoir thread 47 mm, grommet-Ø 47 mm
Neck Ø: 47 mm. Version: Thread 47 mm, For expansion tank. More
Neck Ø: 47 mm. Version: Thread 47 mm, For expansion tank.
€12,79 €10,57
O-ring 30 x 5 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€7,80 €6,45
Profile clamp Fendt
€82,12 €67,87 €75,55 €62,44
You save 8%
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€22,21 €18,36
Cooling fan Ø 620 mm Fendt 714-724
€222,50 €183,88 €204,70 €169,17
You save 8%
Velour floor mat black Fendt 309 (Typ 322) - 724 (Typ 765)
Material: Velour. Colour: Black. Type: Fendt 300, 500, 700 Vario series. Technical data: • Tufted velour with waterproof non-slip backing • Materi... More
Material: Velour. Colour: Black. Type: Fendt 300, 500, 700 Vario serie...
€92,39 €76,36 €85,00 €70,25
You save 8%
Bolt lock for bulb cap Fendt
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€37,82 €31,26 €34,79 €28,76
You save 8%
Bar three-point parts Fendt
Guide bar adjuster Fendt
Pin for lower link strut 28 x 91 mm Fendt
Dimensions: 28 x 91 mm. More
Dimensions: 28 x 91 mm.
€58,31 €48,19 €53,65 €44,33
You save 8%
Hydraulic top link cat. 3, 690 - 956 mm, stroke 266 mm, 11 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 690 / 956 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Adjustab... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 690 / 956 mm. Piston rod Ø D: 45 m...
€724,10 €598,43 €666,17 €550,56
You save 8%
Hydraulic top link cat. 3, 640 - 876 mm, stroke 236 mm, 11 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 876 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Adjustab... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 876 mm. Piston rod Ø D: 45 m...
€686,94 €567,72 €631,98 €522,30
You save 8%
Mirror heated, electric adjustment, 12 V, right / left Fendt
Version: Heated. Operating voltage: 12 V. Installation location: Right/left. Notes: Electric adjustment. More
Version: Heated. Operating voltage: 12 V. Installation location: Right...
€242,62 €200,51 €223,21 €184,47
You save 8%
Detent linkage Fendt
Interior mirror Fendt 310 (Typ 347) - 724 (Typ 743)
€55,37 €45,76 €50,94 €42,10
You save 8%
Spring guide
Brand: Fendt. More
Brand: Fendt.
€31,05 €25,66
ROCKINGER Drawbar without sensor rail 390 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.013,32 €837,45 €780,74 €645,24
You save 23%
Brackets short 390 - 571 mm Fendt
Length min./max.: 390 - 571 mm. More
Length min./max.: 390 - 571 mm.
€247,45 €204,50 €227,65 €188,14
You save 8%
Pressure switch hand brake, neutral switch, connection cable and plug
Version: Neutral switch, connection cable and plug. More
Version: Neutral switch, connection cable and plug.
€217,82 €180,01
Potentiometer clutch pedal and gear lever
Version: Clutch pedal (position) and gear shift (driving range detection level 1 or 2). More
Version: Clutch pedal (position) and gear shift (driving range detecti...
€131,96 €109,06 €121,40 €100,33
You save 8%
Showing 145 - 192 of 318

Parts for the Fendt 720 Vario, Typ 741 version

Hitching, lighting and sealing make up the bulk of what a 720 Vario needs over the years, and this page gathers more than 300 parts for the version with Typ 741 on its type plate. Only parts that fit Typ 741 appear here. They come from brands including GRANIT, HELLA, ROCKINGER, Wabco and Walterscheid.

  • Hitching: automatic drawbars and hydraulic top links
  • Cab: rubber floor mats and push button switches, for example for valve control
  • Lights: orange beacons with the spring for the beacon holder, plus LED work lights
  • Sealing: seals, O-rings and gaskets such as the front cover gasket
  • Fuel and electrics: lockable fuel filler caps, sensors and pressure switches
  • Small hardware: discs and bushes

Confirming Typ 741 before you order

Look at the type plate next to the model name. If the number there is not 741, head to Fendt 720 Vario (Typ 735) or Fendt 720 Vario (Typ 763) instead. A faded plate is common on a hard working tractor. In that case check the part you removed, because switches and sensors usually have a reference number on the housing that you can compare with the product details. You can also start from the general Fendt 720 Vario page, which links all versions of the model.

Keeping the drawbar and top link in shape

An automatic drawbar takes a beating every day. Once a year, check the play between the pin and the jaw, make sure the locking mechanism snaps back cleanly and grease the pin. On a hydraulic top link, the chrome rod is the weak spot. Keep it clean when the tractor is parked, because scoring or rust on the rod chews up the seal and oil starts to weep down the cylinder.

Electrical faults deserve a quick check as well. A pressure switch that triggers random warnings is often fine itself, with a corroded connector causing the trouble. Clean the plug before you replace the switch.

A beacon that wobbles on the cab roof often has a tired spring in its holder. That spring is sold separately, so there is no need to buy a whole new lamp. The same goes for a fuel cap that no longer seals, where a fresh O-ring is usually enough. And when you pressure wash the cab, lift the floor mats out first so the floor underneath can dry.

The rest of the Fendt 700 series

Each tractor in the series has its own page, which is handy when you look after more than one Fendt:

For every other model from the brand, go to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart