Menu
EUR

Fendt 818 Vario (Typ 718) tractor parts & technical data

With Typ 718 on the type plate, you are in the right place: more than 600 parts for the Fendt 818 Vario, including lighting, electrics and trailer couplings.

605 parts found for Fendt 818 Vario
Show:
Rep set drive set Fendt, Massey Ferguson
5%
Rep set drive set Fendt, Massey Ferguson
€445,29 €368,01 €423,00 €349,59
 
GRANIT Adaptor water pump - cylinder head Ø 27 x 40 x 34 mm Fendt
GRANIT
Adaptor water pump - cylinder head Ø 27 x 40 x 34 mm Fendt
Dimensions: Ø 27 x 40 x 34 mm.
€7,00 €5,79
 
Sealing ring for fuel filter
Sealing ring for fuel filter
€8,20 €6,78
 
Suction hose air filter Fendt 714-818
5%
Suction hose air filter Fendt 714-818
€155,62 €128,61 €147,80 €122,15
 
GRANIT Hand pump Fendt Farmer 307-309, Favorit 916-926, 711-930
5%
GRANIT
Hand pump Fendt Farmer 307-309, Favorit 916-926, 711-930
Weight: 334 g.
€61,67 €50,97 €58,55 €48,39
 
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
 
GRANIT Belt kit 1800 mm, 8 ribs Fendt
GRANIT
Belt kit 1800 mm, 8 ribs Fendt
Contents: Belt tensioner and belt. Belt length: 1800 mm. Ribs: 8 n.
€523,70 €432,81
 
Handle Fendt, Case IH
5%
Handle Fendt, Case IH
€39,20 €32,40 €37,20 €30,74
 
Hinge pin rear screen hinge Fendt
Hinge pin rear screen hinge Fendt
€4,72 €3,90
 
GRANIT Pin for rear window handle Fendt
5%
GRANIT
Pin for rear window handle Fendt
€55,60 €45,95 €52,80 €43,64
 
Breather filter oil tank Fendt
5%
Breather filter oil tank Fendt
€46,85 €38,72 €44,50 €36,78
 
GRANIT Bellows lift cylinder Fendt
5%
GRANIT
Bellows lift cylinder Fendt
€81,20 €67,11 €77,10 €63,72
 
GRANIT Bush DW hydraulic cylinder 28 x 32 x 35 mm Fendt
GRANIT
Bush DW hydraulic cylinder 28 x 32 x 35 mm Fendt
Dimensions: 28 x 32 x 35 mm.
€25,40 €20,99
 
GRANIT Clamping bush for lower links 29 x 36 x 27,5 mm Fendt
GRANIT
Clamping bush for lower links 29 x 36 x 27,5 mm Fendt
Dimensions: 29 x 36 x 27.5 mm.
€24,95 €20,62
 
Windshield frame shock absorber 250 N, 600 mm, ball socket 10 mm Fendt
5%
Windshield frame shock absorber 250 N, 600 mm, ball socket 10 mm Fendt
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 mm. D: 10 ...
€37,58 €31,06 €35,70 €29,50
 
GRANIT Sliding block hood Fendt
5%
GRANIT
Sliding block hood Fendt
€32,73 €27,05 €31,00 €25,62
 
Extension left 155 mm Fendt
Extension left 155 mm Fendt
Dimensions: 155 mm.
€397,15 €328,22
 
Spring right fender Fendt, Massey Ferguson
Spring right fender Fendt, Massey Ferguson
Version: Suitable for Fendt pivoting mudguards.
€36,40 €30,08
 
Spring driepuntcentrering Fendt
Spring driepuntcentrering Fendt
€20,85 €17,23
 
Pin 28 x 86 mm Fendt
10%
Pin 28 x 86 mm Fendt
Dimensions: 28 x 86 mm.
€56,15 €46,41 €50,80 €41,98
 
ROCKINGER Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
23%
ROCKINGER
Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.394,15 €1.152,19 €1.067,51 €882,24
 
Showing 241 - 264 of 605

Fendt 818 Vario Typ 718 parts and wear items

Check the identification plate before anything else. If it reads Typ 718, this page is for your tractor: it lists only the parts intended for the Fendt 818 Vario in that version, more than 600 of them. A different Typ number means you are better served by Fendt 818 Vario (Typ 729), or by the general Fendt 818 Vario page, which covers both versions together.

What gets replaced on a Typ 718

Wear starts with the small items. There are seals, including the seal for the tank sensor, and discs and bushes for hinges and pivot points. Pins keep the lower links and the hitch where they belong, and complete Scharmüller drawbars are here too, such as the K80 with its locking pin.

Around the cab you will find gas struts for the windscreen frame, handles for the body panels and push button switches. Lighting is covered by work lamps, rear lights and holders. Starter motors and alternators look after the electrical side, and GRAMMER tractor seats look after the driver. Other brands on this page are GRANIT, HELLA and Wabco.

Replacing the linkage potentiometer

When the rear linkage jerks, hangs or will not lower to its set position, the linkage potentiometer is a common cause. It reports the position of the lift arms to the control unit. Check the plug and wiring first, since a corroded contact gives exactly the same symptoms. If the potentiometer itself is worn, lower the arms fully before removing it and note the position of the driver lever. After fitting, the linkage control normally has to relearn its end positions. Do that before you hitch up a heavy implement again.

Not sure a part is the right one? Compare the reference number on the old part with the details of the new one before ordering.

If the starter motor only clicks or turns slowly, measure the battery voltage first and check the heavy cables and the earth connection. A poor contact gives exactly those symptoms. With a drawbar, pay attention to the rail width and the thickness of the locking pin, because two drawbars that look the same can differ there.

The rest of the Fendt 800 line

If you look after more than one Fendt, every model in the line has its own page with matching parts: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. The whole make is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart