Menu
EUR

Fendt 818 Vario (Typ 718) tractor parts & technical data

With Typ 718 on the type plate, you are in the right place: more than 600 parts for the Fendt 818 Vario, including lighting, electrics and trailer couplings.

605 parts found for Fendt 818 Vario
Show:
GRANIT Gas strut hood 30 N, 145 mm, stroke 30 mm Fendt
5%
GRANIT
Gas strut hood 30 N, 145 mm, stroke 30 mm Fendt
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1: 6 mm. d2:...
€41,94 €34,66 €39,80 €32,89
 
Door lock, right Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
5%
Door lock, right Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€54,86 €45,34 €52,10 €43,06
 
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
5%
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€36,24 €29,95 €34,40 €28,43
 
GRANIT Washer for hinge mount, rear window Fendt
GRANIT
Washer for hinge mount, rear window Fendt
€5,60 €4,63
 
Bush for force sensor pin 37 x 45/54 x 44 mm Fendt, Massey Ferguson
5%
Bush for force sensor pin 37 x 45/54 x 44 mm Fendt, Massey Ferguson
Dimensions: 37 x 45/54 x 44 mm.
€75,14 €62,10 €71,35 €58,97
 
Lift arm left Fendt series 800, 815-818
5%
Lift arm left Fendt series 800, 815-818
€935,33 €773,00 €888,55 €734,34
 
Lift cylinder DW Fendt 718, 815-820
Lift cylinder DW Fendt 718, 815-820
€1.612,15 €1.332,36
 
Clevis joint head cat. 3, A 32 mm, d1 28 mm, L 63 mm
5%
Clevis joint head cat. 3, A 32 mm, d1 28 mm, L 63 mm
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 mm. Menke ...
€85,18 €70,40 €80,90 €66,86
 
GRANIT Spindle three-point Fendt
5%
GRANIT
Spindle three-point Fendt
€209,31 €172,98 €198,80 €164,30
 
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
10%
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system. Voltage: 1...
€35,71 €29,51 €32,30 €26,69
 
GRANIT Top link cat. 2, M30 x 3,5, 515 - 755 mm, hook/threaded spindle
10%
GRANIT
Top link cat. 2, M30 x 3,5, 515 - 755 mm, hook/threaded spindle
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515 / 755 mm....
€175,33 €144,90 €158,60 €131,07
 
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 m...
€32,90 €27,19
 
Headlight panel right Fendt
Headlight panel right Fendt
€22,00 €18,18
 
Headlight panel left Fendt
Headlight panel left Fendt
€22,90 €18,93
 
Intermediate part for fender 145 mm Fendt
10%
Intermediate part for fender 145 mm Fendt
Dimensions: 145 mm.
€334,91 €276,79 €303,00 €250,41
 
GRANIT Extension right 155 mm Fendt Favorit 816-926, 712-930
GRANIT
Extension right 155 mm Fendt Favorit 816-926, 712-930
Dimensions: 155 mm.
€421,50 €348,35
 
Intermediate part for 160 mm Fendt 712-930
Intermediate part for 160 mm Fendt 712-930
Dimensions: 160 mm.
€619,15 €511,69
 
GRANIT Detent linkage Fendt
GRANIT
Detent linkage Fendt
€25,55 €21,12
 
Spring driepuntcentrering Fendt
Spring driepuntcentrering Fendt
€20,85 €17,23
 
Showing 337 - 360 of 605

Fendt 818 Vario Typ 718 parts and wear items

Check the identification plate before anything else. If it reads Typ 718, this page is for your tractor: it lists only the parts intended for the Fendt 818 Vario in that version, more than 600 of them. A different Typ number means you are better served by Fendt 818 Vario (Typ 729), or by the general Fendt 818 Vario page, which covers both versions together.

What gets replaced on a Typ 718

Wear starts with the small items. There are seals, including the seal for the tank sensor, and discs and bushes for hinges and pivot points. Pins keep the lower links and the hitch where they belong, and complete Scharmüller drawbars are here too, such as the K80 with its locking pin.

Around the cab you will find gas struts for the windscreen frame, handles for the body panels and push button switches. Lighting is covered by work lamps, rear lights and holders. Starter motors and alternators look after the electrical side, and GRAMMER tractor seats look after the driver. Other brands on this page are GRANIT, HELLA and Wabco.

Replacing the linkage potentiometer

When the rear linkage jerks, hangs or will not lower to its set position, the linkage potentiometer is a common cause. It reports the position of the lift arms to the control unit. Check the plug and wiring first, since a corroded contact gives exactly the same symptoms. If the potentiometer itself is worn, lower the arms fully before removing it and note the position of the driver lever. After fitting, the linkage control normally has to relearn its end positions. Do that before you hitch up a heavy implement again.

Not sure a part is the right one? Compare the reference number on the old part with the details of the new one before ordering.

If the starter motor only clicks or turns slowly, measure the battery voltage first and check the heavy cables and the earth connection. A poor contact gives exactly those symptoms. With a drawbar, pay attention to the rail width and the thickness of the locking pin, because two drawbars that look the same can differ there.

The rest of the Fendt 800 line

If you look after more than one Fendt, every model in the line has its own page with matching parts: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. The whole make is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart