Menu
EUR

Fendt 818 Vario (Typ 718) tractor parts & technical data

With Typ 718 on the type plate, you are in the right place: more than 600 parts for the Fendt 818 Vario, including lighting, electrics and trailer couplings.

605 parts found for Fendt 818 Vario
Show:
Injection line Fendt 711-716, 815-818
Injection line Fendt 711-716, 815-818
€218,20 €180,33
 
GRANIT Solenoid valve end plate Fendt
5%
GRANIT
Solenoid valve end plate Fendt
€383,39 €316,85 €364,20 €300,99
 
GRANIT Plate hinge mount rear window Fendt
GRANIT
Plate hinge mount rear window Fendt
€25,80 €21,32
 
GRANIT Sealing ring Fendt
GRANIT
Sealing ring Fendt
€31,70 €26,20
 
Bearing bush DW-lift cylinder 40 x 44 x 40 mm Fendt, Massey Ferguson
Bearing bush DW-lift cylinder 40 x 44 x 40 mm Fendt, Massey Ferguson
Dimensions: 40 x 44 x 40 mm.
€38,40 €31,74
 
Yoke for lifting strut Fendt 411-818
10%
Yoke for lifting strut Fendt 411-818
€253,25 €209,30 €229,10 €189,34
 
Hood handle Fendt
Hood handle Fendt
€28,00 €23,14
 
GRANIT Pin Fendt Farmer 307-412, Favorit 509-716, Xylon 520-524
5%
GRANIT
Pin Fendt Farmer 307-412, Favorit 509-716, Xylon 520-524
€81,07 €67,00 €77,00 €63,64
 
Holder
10%
Holder
Brand: Fendt.
€129,59 €107,10 €117,20 €96,86
 
Scharmüller Hold-down 15° with adjustment screw Fendt
12%
Scharmüller
Hold-down 15° with adjustment screw Fendt
Bending angle: 15°. Menke no.: 68325.
€198,45 €164,01 €175,50 €145,04
 
Walterscheid Flange hitch manual 31 mm, 140 x 80 mm, M17, 2000 kg, 82,4 kN
21%
Walterscheid
Flange hitch manual 31 mm, 140 x 80 mm, M17, 2000 kg, 82,4 kN
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 82...
€772,46 €638,40 €606,90 €501,57
 
HELLA Magnetic holder for work lights with U-bracket or mounting plate
HELLA
Magnetic holder for work lights with U-bracket or mounting plate
To fit: Work light with U-bracket or mounting bracket (9XD 130 261-001). Additio...
€121,45 €100,37
 
HELLA Work lamp flood beam H3 70 W, 158 x 162 x 127 mm, 12 / 24 V
HELLA
Work lamp flood beam H3 70 W, 158 x 162 x 127 mm, 12 / 24 V
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installa...
€76,45 €63,18
 
Tail light holder
Tail light holder
€155,30 €128,35
 
V-belt air conditioning Case IH, Massey Ferguson, Steyr, New Holland
24%
V-belt air conditioning Case IH, Massey Ferguson, Steyr, New Holland
To fit as: Fendt
€6,43 €5,31 €4,86 €4,02
 
Main bearing Ø 84 mm Fendt
5%
Main bearing Ø 84 mm Fendt
Dimensions: Ø 84 mm.
€36,54 €30,20 €34,70 €28,68
 
Connecting rod bearing Ø 63 mm, width 29,3 mm Fendt
Connecting rod bearing Ø 63 mm, width 29,3 mm Fendt
Dimensions: Ø 63 mm.
€28,45 €23,51
 
Inlet valve Fendt Farmer 409-412, Favorit 711-716, Fendt 309-820
5%
Inlet valve Fendt Farmer 409-412, Favorit 711-716, Fendt 309-820
€62,97 €52,04 €59,80 €49,42
 
Intake pipe intercooler Fendt 714-818
5%
Intake pipe intercooler Fendt 714-818
€133,21 €110,09 €126,50 €104,55
 
Piston set complete Ø 98 mm, combustion chamber Ø 59,9 mm Fendt
5%
Piston set complete Ø 98 mm, combustion chamber Ø 59,9 mm Fendt
Dimensions: 3 rings, Ø 98 mm, gudgeon pin Ø 38 x 76 mm, combustion chamber Ø 59....
€248,92 €205,72 €236,45 €195,41
 
GRANIT Seal manifold to the turbocharger Fendt
GRANIT
Seal manifold to the turbocharger Fendt
€22,45 €18,55
 
Showing 577 - 600 of 605

Fendt 818 Vario Typ 718 parts and wear items

Check the identification plate before anything else. If it reads Typ 718, this page is for your tractor: it lists only the parts intended for the Fendt 818 Vario in that version, more than 600 of them. A different Typ number means you are better served by Fendt 818 Vario (Typ 729), or by the general Fendt 818 Vario page, which covers both versions together.

What gets replaced on a Typ 718

Wear starts with the small items. There are seals, including the seal for the tank sensor, and discs and bushes for hinges and pivot points. Pins keep the lower links and the hitch where they belong, and complete Scharmüller drawbars are here too, such as the K80 with its locking pin.

Around the cab you will find gas struts for the windscreen frame, handles for the body panels and push button switches. Lighting is covered by work lamps, rear lights and holders. Starter motors and alternators look after the electrical side, and GRAMMER tractor seats look after the driver. Other brands on this page are GRANIT, HELLA and Wabco.

Replacing the linkage potentiometer

When the rear linkage jerks, hangs or will not lower to its set position, the linkage potentiometer is a common cause. It reports the position of the lift arms to the control unit. Check the plug and wiring first, since a corroded contact gives exactly the same symptoms. If the potentiometer itself is worn, lower the arms fully before removing it and note the position of the driver lever. After fitting, the linkage control normally has to relearn its end positions. Do that before you hitch up a heavy implement again.

Not sure a part is the right one? Compare the reference number on the old part with the details of the new one before ordering.

If the starter motor only clicks or turns slowly, measure the battery voltage first and check the heavy cables and the earth connection. A poor contact gives exactly those symptoms. With a drawbar, pay attention to the rail width and the thickness of the locking pin, because two drawbars that look the same can differ there.

The rest of the Fendt 800 line

If you look after more than one Fendt, every model in the line has its own page with matching parts: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. The whole make is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart