Menu
EUR

Fendt 933 Vario (Typ 931) tractor parts & technical data

Gathered for the Fendt 933 Vario Typ 931, this page holds more than 400 parts for that version, including lighting, trailer couplings and electrics.

435 parts found for Fendt 933 Vario
Show:
GRANIT V-belt tensioner from console Ø 70 mm, width 38 mm Fendt 922-939
GRANIT
Outer Ø: 70 mm. Width: 38 mm. Description: From console. More
Outer Ø: 70 mm. Width: 38 mm. Description: From console.
€337,67 €279,07 €320,75 €265,08
You save 5%
GRANIT Thread insert Fendt Farmer 200-270
€42,04 €34,74 €39,90 €32,98
You save 5%
GRANIT Exhaust manifold gasket to turbo Fendt, SAME, Deutz-Fahr
€33,72 €27,87 €32,00 €26,45
You save 5%
GRANIT High-pressure pump Fendt 922-936, Deutz-Fahr Agrotron X710-X720
€851,84 €704,00 €809,20 €668,76
You save 5%
Pressure regulator Fendt, SAME, Deutz-Fahr
€133,37 €110,22 €126,70 €104,71
You save 5%
GRANIT Feed pump Deutz-Fahr Agrotron X 710, X 720, Fendt 922-930
€239,17 €197,66 €227,20 €187,77
You save 5%
GRAMMER Tractor seat Maximo XT Dynamic Plus MSG97AL/741 Fendt
GRAMMER
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 381 mm. Seat... More
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery typ...
€4.700,98 €3.885,11 €4.465,90 €3.690,83
You save 5%
GRANIT Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
€39,45 €32,60 €37,45 €30,95
You save 5%
Force sensor pin Fendt 819-828, 922-939
€644,01 €532,24 €611,80 €505,62
You save 5%
GRANIT Pin linkage Fendt 819-939
€68,11 €56,29 €64,70 €53,47
You save 5%
Locking plate Fendt Favorit 816-926, Fendt 916-939
€127,05 €105,00 €120,65 €99,71
You save 5%
Threaded spindle for lower link strut M27 x 3 mm, B 86 mm, G 153 mm Fendt
A: 28 mm. B: 86 mm. C: 41 mm. D: 76 mm. I: M27 x 2 mm. F: 63 mm. G: 153 mm. More
A: 28 mm. B: 86 mm. C: 41 mm. D: 76 mm. I: M27 x 2 mm. F: 63 mm. G: 15...
€165,71 €136,95 €157,40 €130,08
You save 5%
GRANIT Adjusting nut for lower link strut M27 x 3 Fendt
GRANIT
Dimensions: Thread = M27 x 3 mm. More
Dimensions: Thread = M27 x 3 mm.
€56,48 €46,68 €53,65 €44,34
You save 5%
GRANIT Strike plate clevis Fendt
€18,85 €15,58
Skid hood Fendt
€9,40 €7,77
GRANIT Tensioner lock hood Fendt
€18,00 €14,88
GRANIT Disc rear screen hinge Fendt
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€472,38 €390,40 €417,75 €345,25
You save 12%
GRANIT Replacement glass, wide-angle mirror 103 x 122 mm, can be heated, 12 V Fendt
GRANIT
Dimensions: 103 x 122 mm. Volts: 12. Installation location: Right/left. Version: Can be heated. More
Dimensions: 103 x 122 mm. Volts: 12. Installation location: Right/left...
€160,14 €132,35 €144,85 €119,71
You save 10%
GRANIT Gas strut cover 900 N, 398 mm, stroke 160 mm Fendt
GRANIT
Newtons: 900. A: 398 mm. B: 160 mm. C: 10 mm. D: 19 mm. Stroke: 160 mm. d1: 10 mm. d2: 19 mm. To fit: Hood. Form: 2. More
Newtons: 900. A: 398 mm. B: 160 mm. C: 10 mm. D: 19 mm. Stroke: 160 mm...
€85,26 €70,46 €77,10 €63,72
You save 10%
Showing 289 - 312 of 435

Parts for the Fendt 933 Vario Typ 931

With a 933 Vario in the workshop and Typ 931 on its type plate, this page shows exactly what is available for that version: more than 400 parts matched to this one type number. Parts for the other versions of the 933 are deliberately left out, so you do not end up ordering something meant for a different variant.

The type number is on the type plate of the tractor. If you are unsure whether it is right, say on a tractor you have just taken over, put the old part next to the new one. Cylinders, sensors and alternators usually carry a reference number you can compare.

Cylinders, seals and bleeding the system

For the Typ 931 there are actuating cylinders, including the left upper section for a single circuit, and a long line of seals, oil seals, O-rings and sealing rings. Those small rings are the first thing you need as soon as you open up a cylinder or a pump.

After replacing an actuating cylinder, always bleed the circuit. Pump and bleed until only clear fluid without bubbles comes out of the bleed nipple, and use the fluid specified for that circuit. Air in the system shows up as a spongy pedal, and that is not something you want to find out with a loaded trailer behind you.

Cab, lighting and the rear end

In the cab of this 933 you will find tractor seats, including the air suspended Maximo Professional, handles and push button switches, for example for the air conditioning and heating with cable and plug. Sensors and alternators cover the electrical side.

For seeing and being seen there are LED work lights with a spot beam and amber beacons, together with the brackets they sit in. At the rear the page covers drawbars, inserts for the pick-up hitch and connector heads for the brake line to the trailer. Brands on this page are GRANIT, ROCKINGER, HELLA, Scharmüller and Wabco.

The other versions and the 900 series

If your plate shows another number, go to the right version, or look at the whole model on the Fendt 933 Vario page:

Other tractors in the Fendt 900 series have separate pages, such as the 924 Vario, 927 Vario, 930 Vario, 936 Vario, 939 Vario and 942 Vario. Own more tractors from this make? The overview at Fendt parts gathers them in one place.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart