Menu
EUR

Tractor parts Fendt Farmer 410 (Typ 410)

Looking for parts for your Fendt Farmer 410 (Typ 410) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

622 parts found for Fendt Farmer 410 (Typ 410)
Show:
Push rod Fendt
€49,73 €41,10
Piston ring set 3 rings Ø 98 mm, 2,9 mm trapezoidal ring / 2 mm / 3 mm
Dimensions: 3 rings, Ø 98 mm, 2.9 mm (trapezoidal ring) / 2 mm / 3 mm. More
Dimensions: 3 rings, Ø 98 mm, 2.9 mm (trapezoidal ring) / 2 mm / 3 mm
€66,26 €54,76 €60,96 €50,38
You save 8%
Valve cover gasket upper Deutz Agrotron M 410-420, TTV 410-430
€63,52 €52,50 €58,44 €48,30
You save 8%
Crankshaft forged Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€2.161,63 €1.786,47 €1.988,70 €1.643,55
You save 8%
Connecting rod bearing Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€34,73 €28,70
Guide lower Fendt Farmer 307 (Typ 117), Xylon 524
€180,62 €149,27 €166,17 €137,33
You save 8%
Ball pin steel M6, wrench size 8, E 10 mm Fendt 7387MI, Xylon 524
A: M6 mm. SW: 8. E: 10 mm. More
A: M6 mm. SW: 8. E: 10 mm.
€5,78 €4,77
Bolt lock for bulb cap Fendt
Hammer head bolt M27 Fendt
Menke no.: 208515. More
Menke no.: 208515.
€126,59 €104,62 €116,46 €96,25
You save 8%
Bar three-point parts Fendt
Spring three-point Fendt
Bearing bush DW-lift cylinder 40 x 44 x 40 mm Fendt, Massey Ferguson
Dimensions: 40 x 44 x 40 mm. More
Dimensions: 40 x 44 x 40 mm.
€40,08 €33,12
Adjusting nut for lower link strut M27 x 3 Fendt
Dimensions: Thread = M27 x 3 mm. More
Dimensions: Thread = M27 x 3 mm.
€58,94 €48,71 €54,22 €44,81
You save 8%
Strike plate clevis Fendt
Pin for lifting strut top 25 x 128 mm Fendt
Dimensions: 25 x 128 mm. More
Dimensions: 25 x 128 mm.
€42,00 €34,71 €38,64 €31,93
You save 8%
Reservoir Fendt Farmer 307 (Typ 117), Xylon 524
€67,80 €56,03 €62,38 €51,55
You save 8%
Hood handle Fendt
€29,26 €24,18
Retaining plate hood left Fendt
€38,22 €31,59 €35,16 €29,06
You save 8%
Fender extension left Fendt
Locking pawl quick coupling cat. 1, 2 Fendt Farmer, Favorit
€84,18 €69,57 €77,45 €64,00
You save 8%
Detent linkage Fendt
Pin 22 x 185 mm Fendt
Dimensions: 22 x 185 mm. More
Dimensions: 22 x 185 mm.
€67,01 €55,38 €61,65 €50,95
You save 8%
Plate
Brand: Fendt. More
Brand: Fendt.
€7,35 €6,07
Scharmüller Hold-down 15° with adjustment screw Fendt
Scharmüller
Bending angle: 15°. Menke no.: 68325. More
Bending angle: 15°. Menke no.: 68325.
€207,08 €171,14 €190,51 €157,45
You save 8%
Walterscheid Ball hitch K80 311 / 22 / 30 mm, 84,3 kN
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 84.3 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€2.082,09 €1.720,74 €1.646,11 €1.360,43
You save 21%
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Walterscheid
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. Trailer load: 25000 kg. No. of holes: 4. Description: Towing coupling... More
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colo...
€276,01 €228,11 €218,22 €180,35
You save 21%
Brackets short 390 - 571 mm Fendt
Length min./max.: 390 - 571 mm. More
Length min./max.: 390 - 571 mm.
€247,45 €204,50 €227,65 €188,14
You save 8%
Potentiometer rotary function control panel air conditioning
Version: For control unit - air conditioning. More
Version: For control unit - air conditioning.
€519,26 €429,14
Potentiometer rotary function for control unit fan
Version: For control unit - blower. More
Version: For control unit - blower.
€903,79 €746,94
Pressure switch gear "F" with connection cable and plug
Version: With connection cable and plug. More
Version: With connection cable and plug.
€424,88 €351,14
Coolant temperature sensor M14 x 1,5, +40 - +130 °C
Version: Temperature measuring range: +40°C to +130°C, Thread: M14 x 1.5, Resistance values: 100°C = 2407.2 ohm, Outlet: 2-pin floating ground. Thr... More
Version: Temperature measuring range: +40°C to +130°C, Thread: M14 x...
€93,76 €77,49 €86,26 €71,29
You save 8%
Sensor steering angle front axle
Version: Steering angle sensor. More
Version: Steering angle sensor.
€363,51 €300,42 €334,43 €276,39
You save 8%
Push button switch lift / lower 48 V, button blue, make contact
Version: 48 V switching voltage, Blue button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof an... More
Version: 48 V switching voltage, Blue button, make contact, Total butt...
€36,34 €30,03 €33,43 €27,63
You save 8%
Push button switch lower 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustpro... More
Version: 12 - 16 V switching voltage, Blue button, make contact, Total...
€20,44 €16,89
Push button switch lift 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustpro... More
Version: 12 - 16 V switching voltage, Blue button, make contact, Total...
€29,70 €24,55
Pinion shaft operating switch heating
Version: For heating control switch. More
Version: For heating control switch.
€10,41 €8,61
Knob for blower switch
Version: For blower switch. More
Version: For blower switch.
€9,63 €7,95
Showing 289 - 336 of 622

Fendt Farmer 410 (Typ 410) specifications

The Fendt Farmer 410 Vario (Typ 410) is part of the Farmer 400 Vario series and was built from 1999 to 2006, sitting between the Farmer 409 Vario and the Farmer 411 Vario in the lineup. Like the other models in the 400 series, the engine was revised at the end of 2003, resulting in higher torque figures. The tractor comes standard with four-wheel drive, hydraulic wet disc brakes and power steering. The cab has heating as standard, with air conditioning available as an option.

Hydraulics and PTO

The hydraulic pump delivers 74.9 litres per minute. The rear hitch has a lift capacity of 6,569 kg (category III). The rear PTO is independent and runs at 540, 750 or 1,000 rpm (at 1,932 and 1,937 engine rpm respectively). A front PTO at 540 or 1,000 rpm was optionally available.

Engine specs

Power comes from a Deutz four-cylinder turbodiesel with intercooler, liquid cooling and 16 valves. The specs:

  • Displacement: 3.8 L (231.9 cu in)
  • Bore x stroke: 98 x 126 mm
  • Rated power: 98.6 hp / 73.5 kW at 2,100 rpm
  • Max. power: 107.5 hp / 80.2 kW
  • Torque: 437.0 Nm at 1,450 rpm
  • Starter voltage: 12V
  • Battery: 12V / 90 Ah
  • Alternator: 143 A
  • Fuel tank: 165 L

Transmission

The 410 runs the stepless Fendt Vario transmission. Field speeds go up to 24 km/h forward and 17 km/h reverse, with road speeds up to 50 km/h forward and 40 km/h reverse.

Dimensions, weight and tyres

  • Wheelbase: 241 cm
  • Overall length: 419 cm
  • Width: 226 cm
  • Cab height: 284 cm
  • Front tread: 182 cm
  • Rear tread: 180 cm
  • Ground clearance: 51 cm
  • Unladen weight: 5,210 kg
  • Max. permissible weight: 7,500 kg

Standard tyres are 420/70R24 front and 480/70R38 rear.

Parts for the Fendt Farmer 410 (Typ 410)

We stock parts for the Fendt Farmer 410 Vario, covering engine components, filters, cooling, hydraulics, brakes, exhaust systems, bodywork and electrics. Parts are sourced from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Mahle, Mann-Filter, Walterscheid, Grammer, Cobo and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart