Menu
EUR

Tractor parts Fendt Farmer 412 (Typ 412)

Looking for parts for your Fendt Farmer 412 (Typ 412) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

612 parts found for Fendt Farmer 412 (Typ 412)
Show:
Hammer head bolt M27 Fendt
Menke no.: 208515. More
Menke no.: 208515.
€126,59 €104,62 €115,20 €95,21
You save 9%
Spring three-point Fendt
Piston rod DW linkage Fendt
€518,82 €428,78 €472,30 €390,33
You save 9%
Sealing ring lift shaft 65 x 80 x 8 mm, NBR Fendt
Dimensions: 65 x 80 x 8 mm. Material: NBR. More
Dimensions: 65 x 80 x 8 mm. Material: NBR.
€35,83 €29,61 €32,60 €26,94
You save 9%
Gaiter lift cylinder Fendt
€76,14 €62,93 €69,30 €57,27
You save 9%
Pin lift cylinder/lift arm 40 x 104 mm Fendt
Dimensions: 40 x 104 mm. More
Dimensions: 40 x 104 mm.
€96,12 €79,44 €87,50 €72,31
You save 9%
Seal kit external lift cylinder Ø 28/70 mm Fendt
€177,08 €146,35 €161,20 €133,22
You save 9%
Guide bar adjuster Fendt
Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
€40,78 €33,70 €37,10 €30,66
You save 9%
Pin for lifting strut bottom 25 x 113 mm Fendt
Dimensions: 25 x 113 mm. More
Dimensions: 25 x 113 mm.
€36,49 €30,16 €33,20 €27,44
You save 9%
Gas strut door or hood 250 N, 325 mm Fendt
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or bonnet. Menke no.: 59193. More
suitable for: Tür- oder Motorhaube. Newtons: 250. A: 325 mm. B: 160 m...
€40,93 €33,83 €37,25 €30,79
You save 9%
ROCKINGER Drawbar without sensor rail 311 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 84,3 kN. Colour: Black. Descript... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.143,32 €944,89 €880,91 €728,02
You save 23%
Skid hood Fendt
€9,40 €7,77
Headlight panel right Fendt
Fender extension right Fendt
Fender extension left Fendt
Holder for chock Fendt
Pin 28 x 86 mm Fendt
Dimensions: 28 x 86 mm. More
Dimensions: 28 x 86 mm.
€55,81 €46,12 €50,80 €41,98
You save 9%
Pin Fendt Farmer 307-412, Favorit 509-716, Xylon 520-524
€84,60 €69,92 €77,00 €63,64
You save 9%
Spring guide
Brand: Fendt. More
Brand: Fendt.
€29,75 €24,59
Holder
Brand: Fendt. More
Brand: Fendt.
€128,79 €106,44 €117,20 €96,86
You save 9%
Walterscheid Ball hitch K80 311 / 22 / 30 mm, 84,3 kN
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 84.3 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€2.082,09 €1.720,74 €1.646,10 €1.360,41
You save 21%
Walterscheid Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 88,5 kN. Colour: Black. Descript... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€2.305,12 €1.905,06 €1.822,40 €1.506,12
You save 21%
Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
€158,52 €131,01 €144,30 €119,26
You save 9%
Potentiometer rotary function control panel air conditioning
Version: For control unit - air conditioning. More
Version: For control unit - air conditioning.
€519,25 €429,13
Potentiometer rotary function for control unit fan
Version: For control unit - blower. More
Version: For control unit - blower.
€903,75 €746,90
Oil pressure switch hydraulics ventielblok 8 bar
Version: Valve block, 8 bar. Menke no.: 208167. More
Version: Valve block, 8 bar. Menke no.: 208167.
€153,10 €126,53
Coolant temperature sensor M14 x 1,5, +40 - +130 °C
Version: Temperature measuring range: +40°C to +130°C, Thread: M14 x 1.5, Resistance values: 100°C = 2407.2 ohm, Outlet: 2-pin floating ground. Thr... More
Version: Temperature measuring range: +40°C to +130°C, Thread: M14 x...
€93,76 €77,49 €85,35 €70,54
You save 9%
Push button switch lift 12 - 16 V, button blue, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Blue button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustpro... More
Version: 12 - 16 V switching voltage, Blue button, make contact, Total...
€28,45 €23,51
Push button switch PTO shaft 12 - 16 V, button yellow, make contact, Ø 30 mm
Version: 12 - 16 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustp... More
Version: 12 - 16 V switching voltage, Yellow button, make contact, Tot...
€39,62 €32,74 €36,00 €29,75
You save 9%
Push button switch air conditioning heating with cable and plug
Version: Switch with cable and connecting plug. More
Version: Switch with cable and connecting plug.
€60,10 €49,67
Operating lever heating
Version: For heater. More
Version: For heater.
€11,15 €9,21
Pinion shaft operating switch heating
Version: For heating control switch. More
Version: For heating control switch.
€9,95 €8,22
Cover cap red rectangular, with 2 bores
Version: Rectangular, with 2 holes. More
Version: Rectangular, with 2 holes.
€373,80 €308,93
HELLA Mounting bracket work lamp stainless steel
HELLA
Material: Stainless steel. To fit: Work light. More
Material: Stainless steel. To fit: Work light.
€19,50 €16,12
Showing 433 - 480 of 612

Fendt Farmer 412 (Typ 412) specifications

The Fendt Farmer 412 Vario (Typ 412) is part of the Farmer 400 Vario series and was built from 2001 to 2006. The tractor comes standard with four-wheel drive and a cab with heating, with air conditioning available as an option. In 2003 the engine was revised, resulting in a slight power increase. The 412 sits between the Farmer 411 Vario in the lineup and was later succeeded by the Fendt 412 Vario from the regular 400 Vario series from 2006 onwards.

Engine

The Fendt Farmer 412 Vario is powered by a Deutz four-cylinder turbodiesel with intercooler and liquid cooling. The engine has 16 valves and direct injection. The specs:

  • Displacement: 3.8 L (231.9 cu in)
  • Bore x stroke: 98 x 126 mm
  • Power: 120 hp / 89.5 kW
  • Torque: 540.1 Nm at 1,450 rpm
  • Rated RPM: 2,100
  • Compression ratio: 18:1
  • Starter voltage: 12V
  • Battery: 12V / 90 Ah
  • Alternator: 143 A
  • Fuel tank: 165 L

Transmission

The Farmer 412 Vario uses the stepless Fendt Vario transmission type ML 90. Field speeds go up to 24 km/h forward and 17 km/h reverse, with road speeds up to 50 km/h forward and 40 km/h reverse. Brakes are hydraulically operated wet disc brakes and steering is power-assisted.

Dimensions and weight

  • Wheelbase: 241 cm
  • Overall length: 419 cm
  • Width: 245 cm
  • Cab height: 287 cm
  • Front tread: 182 cm
  • Rear tread: 180 cm
  • Ground clearance: 53 cm
  • Unladen weight: 5,239 kg
  • Max. permissible weight: 7,500 kg

Hydraulics, PTO and tyres

The hydraulic pump delivers 74.9 litres per minute via a load sensing system. The rear hitch has a lift capacity of 6,569 kg (category III). A front linkage was available as an option. The rear PTO is independent and runs at 540, 750 or 1,000 rpm (at 1,932 and 1,937 engine rpm respectively). A front PTO at 540 or 1,000 rpm was optionally available. Standard tyres are 540/65R24 front and 600/65R38 rear.

Parts for the Fendt Farmer 412 (Typ 412)

We stock a wide range of parts for the Fendt Farmer 412 Vario, covering engine components, filters, cooling, hydraulics, brakes, exhaust systems, bodywork and electrics. Parts are sourced from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Mahle, Mann-Filter, Walterscheid, Grammer, Cobo and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart