Web Analytics
Fendt Favorit 11 tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 11

Looking for parts for your Fendt Favorit 11 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

68 parts found for Fendt Favorit 11
Show:
GRANIT Master brake cylinder Ø 15,87 mm, DOT 4 Fendt Favorit 4S-12S, 610S-614S
15%
GRANIT
Master brake cylinder Ø 15,87 mm, DOT 4 Fendt Favorit 4S-12S, 610S-614S
Hole Ø: 15.87 mm.
€430,40 €355,70 €365,84 €302,35
 
GRANIT Cap steering wheel Ø 50 mm Hanomag Perfekt 301-401 E, Granit 501 E
33%
GRANIT
Cap steering wheel Ø 50 mm Hanomag Perfekt 301-401 E, Granit 501 E
To fit as: Hanomag Perfekt 301, 401, 401 E, Granit 501, 501 E, 500/1
€17,55 €14,50 €11,68 €9,65
 
METARO Steering wheel ¯ 425 mm taper ¯ 22 mm with keyway tulip shape Eicher, MAN, Guldner
49%
METARO
Steering wheel ¯ 425 mm taper ¯ 22 mm with keyway tulip shape Eicher, MAN, Guldner
To fit as: Eicher, MAN, Güldner
€137,62 €113,74 €69,99 €57,84
 
GRANIT Radiator hose water pump suction pipe Ø 32/36 mm Fendt
2%
GRANIT
Radiator hose water pump suction pipe Ø 32/36 mm Fendt
Inner Ø: 32 / 36 mm.
€22,11 €18,27 €21,67 €17,91
 
GRANIT Piston ring set 4 rings, Ø 95 mm, 3/3/3/5 mm Renault, Fendt, MWM
2%
GRANIT
Piston ring set 4 rings, Ø 95 mm, 3/3/3/5 mm Renault, Fendt, MWM
Dimensions: 4 rings, Ø 95 mm, 3 mm (trapezoidal ring) / 3 mm / 3 mm / 5 mm.
€59,02 €48,78 €57,84 €47,80
 
GRANIT Seal kit upper ZKD 0,75 mm engine MWM D 208, D 225
2%
GRANIT
Seal kit upper ZKD 0,75 mm engine MWM D 208, D 225
€38,48 €31,80 €37,71 €31,17
 
GRANIT Reflector rectangular red, 130 x 42 mm Eicher, Güldner
4%
GRANIT
Reflector rectangular red, 130 x 42 mm Eicher, Güldner
€2,44 €2,02 €2,34 €1,93
 
KS Piston set complete Ø 95 mm, piston pin 32 x 82 mm, Fendt, Renault
15%
KS
Piston set complete Ø 95 mm, piston pin 32 x 82 mm, Fendt, Renault
Dimensions: 4 rings, Ø 95 mm, gudgeon pin Ø 32 x 82 mm, combustion chamber Ø 57....
€454,72 €375,80 €386,51 €319,43
 
GRANIT Connecting rod bearing standard, Ø 58 mm Fendt
GRANIT
Connecting rod bearing standard, Ø 58 mm Fendt
Dimensions: Ø 58 mm.
€23,13 €19,12
 
GRANIT Inlet valve engine MWM D 226 - D 327 Fendt
2%
GRANIT
Inlet valve engine MWM D 226 - D 327 Fendt
€14,30 €11,82 €14,01 €11,58
 
GRANIT Outlet valve Fendt
2%
GRANIT
Outlet valve Fendt
€19,72 €16,30 €19,33 €15,98
 
GRANIT Horn button Ø 50 mm Hanomag R 16 - R 442
GRANIT
Horn button Ø 50 mm Hanomag R 16 - R 442
To fit as: Hanomag R 16, R 19, R 217, R 22, R 27, R 324, R 332, R 25, R 28, R 35...
€21,18 €17,50
 
GRANIT Clutch plate 310 MCC lining, 41 x 45 mm, 22 splines Fendt
GRANIT
Clutch plate 310 MCC lining, 41 x 45 mm, 22 splines Fendt
Dimensions (mm): 41 x 45, 22 grooves | Material specifications: MCC clutch linin...
€946,04 €781,85
 
GRANIT Thrust bearing single 60 x 96,5 x 27 mm
GRANIT
Thrust bearing single 60 x 96,5 x 27 mm
Dimensions (mm): 60 x 96.5 x 27
€94,66 €78,23
 
LUK Thrust bearing with sleeve, without lubrication hole 57 x 100 x 56 mm
2%
LUK
Thrust bearing with sleeve, without lubrication hole 57 x 100 x 56 mm
Dimensions (mm): 57 x 100 x 56 64.5 x 100 x 25
€311,93 €257,79 €304,96 €252,03
 
LUK Thrust bearing 65 x 102 x 26 mm Fendt, Same
2%
LUK
Thrust bearing 65 x 102 x 26 mm Fendt, Same
Dimensions (mm): 65 x 102 x 26
€120,49 €99,58 €117,81 €97,36
 
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
2%
LUK
Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
Dimensions (mm): 60 x 97 x 26
€126,81 €104,80 €123,98 €102,46
 
GRANIT Clutch plate 310 organic, 41 x 45 mm, 22 splines Fendt
GRANIT
Clutch plate 310 organic, 41 x 45 mm, 22 splines Fendt
Dimensions (mm): 41 x 45, 22 grooves | Material specifications: Organic clutch l...
€416,82 €344,48
 
GRANIT Single clutch G 310 flywheel 36 mm Fendt, Steyr
GRANIT
Single clutch G 310 flywheel 36 mm Fendt, Steyr
Flywheel dimension (mm): 36 | Additional information: Made in Germany
€605,10 €500,08
 
GRANIT Thrust bearing 65 x 102 x 26 mm Case IH, Fendt, Porsche, Same, Schlüter
GRANIT
Thrust bearing 65 x 102 x 26 mm Case IH, Fendt, Porsche, Same, Schlüter
Dimensions (mm): 65 x 102 x 26
€37,60 €31,07
 
GRANIT Thrust bearing driving clutch 57 x 100 x 55,5 mm Fendt Farmer 2 - 312
GRANIT
Thrust bearing driving clutch 57 x 100 x 55,5 mm Fendt Farmer 2 - 312
Dimensions (mm): 57 x 100 x 55.5
€179,45 €148,31
 
KS Connecting rod bearing Ø 58 mm, width 27 mm Renault, Fendt
2%
KS
Connecting rod bearing Ø 58 mm, width 27 mm Renault, Fendt
€35,27 €29,15 €34,56 €28,56
 
VICTOR REINZ Oil sump gasket engine D208-6 - D227-6 Fendt Favorit 4-615LSA
2%
VICTOR REINZ
Oil sump gasket engine D208-6 - D227-6 Fendt Favorit 4-615LSA
€66,79 €55,20 €65,45 €54,09
 
GRANIT O-ring cylinder liner 105 x 4 mm Fendt
2%
GRANIT
O-ring cylinder liner 105 x 4 mm Fendt
Dimensions: 105 x 4 mm.
€3,82 €3,16 €3,74 €3,09
 
Showing 25 - 48 of 68

Fendt Favorit 11 specs and technical data

The Fendt Favorit 11S was built from 1970 to 1972 in Marktoberdorf, sitting between the 80 hp Favorit 10S and the 110 hp Favorit 12SA in the lineup. Between the 2WD version (Favorit 11S, internal designation FW 182/01) and the 4WD version (Favorit 11SA), only 160 units were built in total: 26 as 2WD and 134 as 4WD. Just like with the Favorit 12, almost every buyer chose the four-wheel drive variant. The Favorit 611S followed as its successor in 1972.

Engine

The Favorit 11S uses a liquid-cooled MWM six-cylinder diesel with 5.1 litres displacement, the same engine block as the Favorit 10S but tuned to 95 hp (70.8 kW net, 105 hp gross) at 2,400 rpm. The Favorit 12S used a larger 6.2-litre version of the same engine family in the form of the MWM 226-6. The fuel tank holds 129.8 litres. The rear PTO runs at 540 or 1,000 rpm and a hydraulic turbo clutch was fitted as standard.

Transmission and drivetrain

The gearbox is a fully synchronised unit with 16 forward gears and 8 reverse gears. An optional creeper gear package was available, bringing the forward gears to 20 in total. Top speed is 28.2 km/h. Steering is hydrostatic. The front axle on the 4WD version is a ZF pendulum drive axle. Brakes are wet disc brakes. There is no cab as standard.

Rear linkage and hydraulics

Lifting capacity at the rear three-point linkage is 3,500 kg. The three-point hitch is Category II.

Dimensions and weight

  • Wheelbase: 268 cm
  • Kerb weight: 4,090 to 4,490 kg depending on version
  • Standard front tyres: 7.50-20
  • Standard rear tyres: 18.4-34

Compared to the Favorit 12S, the Favorit 11S has a slightly longer wheelbase (268 cm versus 261 cm) but a lower weight and less lifting capacity.

Parts for the Fendt Favorit 11

We stock parts for the Fendt Favorit 11S and 11SA, including engine components, cooling, fuel system parts, brakes, hydraulics, electrics, and bodywork. Parts we carry come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter, and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart