Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

690 parts found for Fendt Favorit 509 (Typ 509)
Show:
Connecting rod bearing standard, Ø 63 mm Fendt
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€34,47 €28,49 €31,35 €25,91
You save 9%
Crankshaft seal for Ø 78 x 100 x 13 mm Fendt
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595. More
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595.
€29,95 €24,75
Cylinder head bolt 14 x 158 mm Case IH, Steyr, Fendt
Dimensions: M14 x 158 mm. More
Dimensions: M14 x 158 mm.
€35,29 €29,17 €32,10 €26,53
You save 9%
Injection nozzle, complete Fendt Farmer 307-312, Favorit 509-515
€464,27 €383,69 €422,65 €349,30
You save 9%
Piston cooling nozzle Fendt
€149,86 €123,85 €143,60 €118,68
You save 4%
Cover crankshaft rear Fendt
€652,71 €539,43 €594,20 €491,07
You save 9%
Bleed valve Fendt Farmer 102-312, Favorit 509-615, GT 231
€57,92 €47,87 €52,70 €43,55
You save 9%
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
Head Ø: 31 mm. Shaft Ø: 17,5 mm. More
Head Ø: 31 mm. Shaft Ø: 17,5 mm.
€42,49 €35,12 €38,65 €31,94
You save 9%
Washers M14
€8,60 €7,11
Disc cylinder head Fendt
Clamp lock Fendt
Hand throttle cable A 1695 mm, B 1480 mm Fendt
A: 1695 mm. B: 1480 mm. Menke no.: 208404. More
A: 1695 mm. B: 1480 mm. Menke no.: 208404.
€110,35 €91,20 €100,45 €83,02
You save 9%
Turbocharger mounting kit Fendt Farmer 308-310, Favorit 509-510
Contents: 1x copper sealing ring, 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket, 1x oil outlet gasket, 1x oil inlet gasket, 4... More
Contents: 1x copper sealing ring, 1x turbine inlet gasket, 1x turbine ...
€162,73 €134,49 €148,10 €122,40
You save 9%
Connecting rod bearing standard, Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€36,88 €30,48 €33,55 €27,73
You save 9%
Piston, complete Fendt Farmer 304-312, Favorit 509-615
€82,93 €68,54 €75,45 €62,36
You save 9%
Volume regulator Fendt, Deutz-Fahr
€176,40 €145,79 €160,55 €132,69
You save 9%
End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 80 l/min., Tightening torque: 30 Nm, Connections: M12 x 1.5, Dimensions: 154... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€222,69 €184,04 €202,70 €167,52
You save 9%
Seal hydraulic pump Fendt
Seal pump cover Fendt
Gas strut rear window 300 N, 600 mm, stroke 252 mm Fendt
Newtons: 300. A: 600 mm. B: 300 mm. C: 10 mm. D: 10 mm. Stroke: 252 mm. d1: 8 mm. d2: 18 mm. To fit: Rear screen. Form: 6. More
Newtons: 300. A: 600 mm. B: 300 mm. C: 10 mm. D: 10 mm. Stroke: 252 mm...
€37,06 €30,63 €33,70 €27,85
You save 9%
Pin for rear window handle Fendt
€58,02 €47,95 €52,80 €43,64
You save 9%
Push rod Fendt
€369,85 €305,66 €336,70 €278,26
You save 9%
Valve left and right Fendt
€193,63 €160,02 €176,25 €145,66
You save 9%
Hydraulic cylinder Fendt
€1.710,35 €1.413,51 €1.557,00 €1.286,78
You save 9%
Bellows lift cylinder Fendt
€84,74 €70,03 €77,10 €63,72
You save 9%
Seal kit outer lift cylinder Ø 80 mm Fendt
€213,03 €176,06 €193,90 €160,25
You save 9%
Seal Fendt Farmer 200-300
Spindle stabilizer 230 mm Fendt
Length: 230 mm. More
Length: 230 mm.
€227,94 €188,38 €207,50 €171,49
You save 9%
Bush DW hydraulic cylinder 28 x 32 x 35 mm Fendt
Dimensions: 28 x 32 x 35 mm. More
Dimensions: 28 x 32 x 35 mm.
€25,40 €20,99
Tube 42 x 45 x 178 mm Fendt Farmer, Favorit, GT, Xylon
Dimensions: 42 x 45 x 178 mm. More
Dimensions: 42 x 45 x 178 mm.
€43,46 €35,92 €39,55 €32,69
You save 9%
Showing 577 - 624 of 690

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart