Web Analytics
Fendt Favorit 611 (Typ 382) Parts & Specs
Menu
EUR

Fendt Favorit 611 (Typ 382) parts

Looking for parts for your Fendt Favorit 611 (Typ 382) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

426 Products
Show:
Gasket For oil return line
5%
Gasket For oil return line
€4,09 €3,38 €3,89 €3,21
 
Stop cable
7%
Stop cable
A: 1485 mm. B: 1035 mm.
€180,53 €149,20 €167,89 €138,75
 
Valve spring
Valve spring
€22,71 €18,77
 
Piston set complete 4 rings, Ø 105 mm, gudgeon pin Ø 35 x 82 mm, combustion chamber Ø 62 mm, combustion chamber depth 20.25 mm, dry liner
7%
Piston set complete 4 rings, Ø 105 mm, gudgeon pin Ø 35 x 82 mm, combustion chamber Ø 62 mm, combustion chamber depth 20.25 mm, dry liner
Dimensions: 4 rings, Ø 105 mm, Gudgeon pin Ø 35 x 82 mm, Combustion chamber Ø 62...
€194,53 €160,77 €180,91 €149,51
 
Gasket for oil filter head
5%
Gasket for oil filter head
€6,17 €5,10 €5,86 €4,84
 
Gasket set Top, 1 cylinder, Cylinder head gasket 1.15 mm thick
5%
Gasket set Top, 1 cylinder, Cylinder head gasket 1.15 mm thick
€34,49 €28,50 €32,77 €27,08
 
Clamp half for MWM engine
5%
Clamp half for MWM engine
€5,55 €4,59 €5,27 €4,36
 
Set of parts
5%
Set of parts
Dimensions: Ø 29/35 mm. Height: 53 mm.
€10,01 €8,27 €9,51 €7,86
 
Hinge part for door, except for: Favorit 610
5%
Hinge part for door, except for: Favorit 610
€11,50 €9,50 €10,93 €9,03
 
Bearing for window opener (side window right/left)
5%
Bearing for window opener (side window right/left)
€12,39 €10,24 €11,77 €9,73
 
Locking claw rear screen
5%
Locking claw rear screen
€28,21 €23,31 €26,80 €22,15
 
Guide ring
5%
Guide ring
€14,98 €12,38 €14,23 €11,76
 
Spindle for lifting strut
7%
Spindle for lifting strut
Dimensions: Length = 300, Thread = M28 x 2 mm.
€160,40 €132,56 €149,17 €123,28
 
Guide bar for lifting strut
5%
Guide bar for lifting strut
€16,86 €13,93 €16,02 €13,24
 
Gas strut
5%
Gas strut
suitable for: Tür. Newtons: 100. A: 500 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form:...
€24,62 €20,35 €23,39 €19,33
 
Pin for top link
5%
Pin for top link
Dimensions: 25.4 x 140 mm.
€45,18 €37,34 €42,92 €35,47
 
ROCKINGER Inner part
15%
ROCKINGER
Inner part
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.213,79 €1.003,13 €1.031,72 €852,66
 
Detent bearing
5%
Detent bearing
€19,90 €16,45 €18,91 €15,63
 
Potentiometer Rotary function
Potentiometer Rotary function
Version: For control unit - hydraulics. Menke no.: 209776.
€148,49 €122,72
 
Brake light switch Mechanical
5%
Brake light switch Mechanical
Version: Break contact, normally on.
€87,83 €72,59 €83,44 €68,96
 
Start switch 12 V/24 V
5%
Start switch 12 V/24 V
Version: • With 2 moulded reversible safety keys made of nickel silver, • For ce...
€51,04 €42,18 €48,49 €40,07
 
HELLA Rocker switch (Combination switch) locking
5%
HELLA
Rocker switch (Combination switch) locking
Version: Without light, 3 blade terminals 6.3 mm, 3 switch positions 0: off, 1 a...
€17,48 €14,45 €16,62 €13,74
 
Push button switch Blower
5%
Push button switch Blower
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€43,89 €36,27 €41,70 €34,46
 
HELLA Reflectors - Colour: Yellow, Total Ø: 60 mm
15%
HELLA
Reflectors - Colour: Yellow, Total Ø: 60 mm
Colour: Yellow | Total Ø (mm): 60 | Additional information: 22 cm² effective ref...
€2,25 €1,86 €1,91 €1,58
 
Showing 361 - 384 of 426

Fendt Favorit 611 (Typ 382) specifications

The Fendt Favorit 611 LSA carries the internal type designation T 382 and was built from 1985 to 1993 exclusively with four-wheel drive. A total of 1,433 units were produced. The 611 LSA is the successor to the 611 LS (Typ 282) and at the same time the conclusion of a development line that began in 1972 with the Favorit 611 S. The LS version with rear-wheel drive falls under Typ FWA 282.

Production ran in two clearly distinct phases. In the first phase (chassis number T 382.250, 1985 to 1987, 228 units), the engine has no turbocharger and produces 115 hp. In the second phase (chassis number T 382.211, 1988 to 1993, 1,205 units), a turbocharger was added and the combustion process optimised, raising output to 125 hp while fuel consumption fell. The 611 LSA was succeeded in the line-up by the Favorit 500C series.

Hydraulics and lift system

The hydraulic tandem pump delivers 69 litres per minute (44 plus 25 litres) at 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available with a maximum lift capacity of 3,940 kg. The permissible front axle load is 3,050 kg and the rear axle load 5,400 kg. The permissible gross weight is 8,500 kg.

Engine

The second phase (1988 to 1993) uses an MWM TD 226-B 6, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection into the combustion bowl of the piston. The engine is fitted with individually mounted cylinder heads, piston crown cooling, an oil cooler, Rotocap valves, a viscous fan, an inline injection pump, a multi-hole injector, a dry air filter with pre-cleaner, pressure circulation lubrication, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,240 cc. Maximum torque is 497 Nm at 1,500 rpm. Injection pressure is 180 to 185 bar, raised to 650 bar from 1987.

The first phase (1985 to 1987) has a naturally aspirated MWM D 226.6.2 without turbocharger producing 115 hp, with a maximum torque of 412 Nm at 1,500 rpm.

Transmission and travel speed

The 611 LSA has a helical-cut ZF fully synchronised fine-step gearbox type T 3345 with side-mounted gear selection, offering 20 forward and 9 reverse gears. Top speed is 40 km/h in the standard version, with a 30 km/h version also available. In the 40 km/h version, the six gears in the fast range run from 3.88 to 38.41 km/h, in the slow range from 3.12 to 30.94 km/h and in the creep range from 4.71 to 27.41 km/h. From 1987, the Duospeed drive system was available as an option, along with an electronically controlled differential lock and a reversing unit.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft disc brake acts on the four-wheel drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. Steering is hydrostatically assisted.

Dimensions and weight

  • Unladen weight: 6,080 kg
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 223 g/kWh

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear. The cab is a rubber-mounted, vibration and sound-insulated safety cab with a noise level of 78 dB, air-suspended seat, digital tractor meter, fold-open front and rear windows, roof hatch, three-stage ventilation system, two-stage heating, radio preparation and height-adjustable steering wheel.

Difference from the 611 LS (Typ 282)

The difference between Typ 382 and Typ 282 is a recurring point when sourcing parts and when purchasing. The Typ 282 is the LS series, built from 1977 to 1984, available with either rear-wheel or four-wheel drive and producing 100 to 110 hp from a naturally aspirated engine. The Typ 382 is available exclusively with four-wheel drive, has a turbocharged engine in its second phase, a higher hydraulic pump output and higher permissible axle loads. The gearbox on both types is a ZF T 3345, but the configuration differs between phases.

Brands
  • View more
Locking pin Ø
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart