Web Analytics
Fendt Favorit 611 (Typ 382) Parts & Specs
Menu
EUR

Fendt Favorit 611 (Typ 382) parts

Looking for parts for your Fendt Favorit 611 (Typ 382) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

426 Products
Show:
Control unit Bosch system SB7
15%
Control unit Bosch system SB7
This auxiliary control unit is a four-position device that can be used for doubl...
€559,59 €462,47 €475,65 €393,10
 
Mudguard front, for tyres 425/75-20
Mudguard front, for tyres 425/75-20
Width: 46 mm. Length L: 152 mm.
€200,63 €165,81
 
HELLA Rear light right Fendt, John Deere, Kubota
15%
HELLA
Rear light right Fendt, John Deere, Kubota
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S, 303, 304...
€22,16 €18,31 €18,76 €15,50
 
Alternator 14 V / 65 A - Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
7%
Alternator 14 V / 65 A - Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€177,88 €147,01 €165,43 €136,72
 
Handle for AGCO Fendt
5%
Handle for AGCO Fendt
€29,34 €24,25 €27,87 €23,03
 
Main headlight insert left and right
5%
Main headlight insert left and right
Bulb: 12V55W / H4. Nominal voltage: 12 V. Light function: with high beam, with l...
€30,66 €25,34 €29,13 €24,07
 
Mudguard attachment
5%
Mudguard attachment
€19,60 €16,20 €18,62 €15,39
 
Mirror 250 x 155 mm
5%
Mirror 250 x 155 mm
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, 4210, 4220...
€26,28 €21,72 €24,97 €20,64
 
Gasket set to fit as 85219002, G178960022011, G178960021011
5%
Gasket set to fit as 85219002, G178960022011, G178960021011
Technical data: 4 O-rings each 17.3 x 2.35, 3 O-rings 11 x 1.5 each, 1 O-ring ea...
€25,29 €20,90 €24,03 €19,86
 
Scharmüller Hitch K80 00.123.80.0-A11 - 330/25/32 - 84,1Kn - 3000kg - AGCO-grey
15%
Scharmüller
Hitch K80 00.123.80.0-A11 - 330/25/32 - 84,1Kn - 3000kg - AGCO-grey
To fit as: Deutz-Fahr Serie D-06 (10006-12006); Fendt Serie Favorit 600 LS/LSA/S...
€2.352,24 €1.944,00 €1.999,40 €1.652,40
 
LED work light
5%
LED work light
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x ...
€69,02 €57,04 €65,57 €54,19
 
MANN-FILTER Engine oil filter W940
37%
MANN-FILTER
Engine oil filter W940
€14,98 €12,38 €9,49 €7,84
 
Stabilus Gas struts 223.5 mm | 60 mm | 120N
5%
Stabilus
Gas struts 223.5 mm | 60 mm | 120N
To fit as: Fendt Roof hatch
€21,56 €17,82 €20,48 €16,93
 
Wabco Antifreeze pump
7%
Wabco
Antifreeze pump
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 bar. Delive...
€285,09 €235,61 €265,13 €219,12
 
Air filter to fit as C15165/3 & AF4135
5%
Air filter to fit as C15165/3 & AF4135
€40,08 €33,12 €38,08 €31,47
 
Force measuring pin 40 kN
15%
Force measuring pin 40 kN
Dimensions: Length = 158.3, Ø = 36.8 mm. Ø: 36,8 mm. Length: 158,3 mm.
€570,76 €471,70 €485,15 €400,95
 
Starter 12 V / 2.7 kW - Fendt, Renault, Steyr
15%
Starter 12 V / 2.7 kW - Fendt, Renault, Steyr
To fit as: Fendt, Renault, Steyr
€453,41 €374,72 €385,40 €318,51
 
Tank sensor 12 V
Tank sensor 12 V
€208,27 €172,12
 
HELLA Lens rear light John Deere, Deutz-Fahr, Kubota, Fendt, Eicher, MF, Manitou
15%
HELLA
Lens rear light John Deere, Deutz-Fahr, Kubota, Fendt, Eicher, MF, Manitou
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, ...
€19,19 €15,86 €16,25 €13,43
 
HELLA Lens Rear light John Deere, Deutz-Fahr, Kubota, Fendt, Eicher, MF, Manitou
15%
HELLA
Lens Rear light John Deere, Deutz-Fahr, Kubota, Fendt, Eicher, MF, Manitou
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, ...
€19,19 €15,86 €16,25 €13,43
 
Roof hatch
15%
Roof hatch
To fit as Fendt.
€315,21 €260,50 €267,93 €221,43
 
Force measuring pin 60 kN
15%
Force measuring pin 60 kN
Dimensions: Length = 158.1, Ø = 36.8 mm.
€762,61 €630,26 €648,22 €535,72
 
Rotating beacon H1 12 V | Socket pipe
5%
Rotating beacon H1 12 V | Socket pipe
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€83,68 €69,16 €79,50 €65,70
 
HELLA Symbol Rotating beacon
5%
HELLA
Symbol Rotating beacon
Version: Yellow, rotating beacon. Colour: gelb. To fit: HELLA Schalter Serien 45...
€2,30 €1,90 €2,19 €1,81
 
Showing 1 - 24 of 426

Fendt Favorit 611 (Typ 382) specifications

The Fendt Favorit 611 LSA carries the internal type designation T 382 and was built from 1985 to 1993 exclusively with four-wheel drive. A total of 1,433 units were produced. The 611 LSA is the successor to the 611 LS (Typ 282) and at the same time the conclusion of a development line that began in 1972 with the Favorit 611 S. The LS version with rear-wheel drive falls under Typ FWA 282.

Production ran in two clearly distinct phases. In the first phase (chassis number T 382.250, 1985 to 1987, 228 units), the engine has no turbocharger and produces 115 hp. In the second phase (chassis number T 382.211, 1988 to 1993, 1,205 units), a turbocharger was added and the combustion process optimised, raising output to 125 hp while fuel consumption fell. The 611 LSA was succeeded in the line-up by the Favorit 500C series.

Hydraulics and lift system

The hydraulic tandem pump delivers 69 litres per minute (44 plus 25 litres) at 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available with a maximum lift capacity of 3,940 kg. The permissible front axle load is 3,050 kg and the rear axle load 5,400 kg. The permissible gross weight is 8,500 kg.

Engine

The second phase (1988 to 1993) uses an MWM TD 226-B 6, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection into the combustion bowl of the piston. The engine is fitted with individually mounted cylinder heads, piston crown cooling, an oil cooler, Rotocap valves, a viscous fan, an inline injection pump, a multi-hole injector, a dry air filter with pre-cleaner, pressure circulation lubrication, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,240 cc. Maximum torque is 497 Nm at 1,500 rpm. Injection pressure is 180 to 185 bar, raised to 650 bar from 1987.

The first phase (1985 to 1987) has a naturally aspirated MWM D 226.6.2 without turbocharger producing 115 hp, with a maximum torque of 412 Nm at 1,500 rpm.

Transmission and travel speed

The 611 LSA has a helical-cut ZF fully synchronised fine-step gearbox type T 3345 with side-mounted gear selection, offering 20 forward and 9 reverse gears. Top speed is 40 km/h in the standard version, with a 30 km/h version also available. In the 40 km/h version, the six gears in the fast range run from 3.88 to 38.41 km/h, in the slow range from 3.12 to 30.94 km/h and in the creep range from 4.71 to 27.41 km/h. From 1987, the Duospeed drive system was available as an option, along with an electronically controlled differential lock and a reversing unit.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft disc brake acts on the four-wheel drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. Steering is hydrostatically assisted.

Dimensions and weight

  • Unladen weight: 6,080 kg
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 223 g/kWh

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear. The cab is a rubber-mounted, vibration and sound-insulated safety cab with a noise level of 78 dB, air-suspended seat, digital tractor meter, fold-open front and rear windows, roof hatch, three-stage ventilation system, two-stage heating, radio preparation and height-adjustable steering wheel.

Difference from the 611 LS (Typ 282)

The difference between Typ 382 and Typ 282 is a recurring point when sourcing parts and when purchasing. The Typ 282 is the LS series, built from 1977 to 1984, available with either rear-wheel or four-wheel drive and producing 100 to 110 hp from a naturally aspirated engine. The Typ 382 is available exclusively with four-wheel drive, has a turbocharged engine in its second phase, a higher hydraulic pump output and higher permissible axle loads. The gearbox on both types is a ZF T 3345, but the configuration differs between phases.

Brands
  • View more
Locking pin Ø
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart