Menu
EUR

Tractor parts Fendt Favorit 612 (Typ 383)

Looking for parts for your Fendt Favorit 612 (Typ 383) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

546 parts found for Fendt Favorit 612 (Typ 383)
Show:
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, luftgekühlt (air-cooled)
Wabco
Cooling system: Air | Piston stroke (mm): 36 | Operating pressure max. (bar): 10 | Piston Ø (mm): 75 | Cylinder capacity (cm³): 159 | Thread: Cranks... More
Cooling system: Air | Piston stroke (mm): 36 | Operating pressure max....
€2.006,48 €1.658,25 €1.922,84 €1.589,13
You save 4%
Bosch/Rexroth Hydraulic pump 11 cm³ anticlockwise, claw 17,8 x 8 Deutz-Fahr, Fendt
Bosch/Rexroth
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 More
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of ...
€582,33 €481,26 €535,74 €442,76
You save 8%
Bosch/Rexroth Control valve lifting linkage Fendt Farmer 304-312, Favorit 509-615
€4.741,19 €3.918,34 €4.361,89 €3.604,87
You save 8%
Bosch/Rexroth Double pump 19 + 11 cm³, B 17 x 14, 9 splines, left Fendt, Renault
Bosch/Rexroth
Max. speed (1/min.): 3000 | Direction of rotation: Anticlockwise | OEM version: 514100490160/ F180860010030 | Operating pressure max. (bar): 230/280 |... More
Max. speed (1/min.): 3000 | Direction of rotation: Anticlockwise | OEM...
€1.182,84 €977,55 €1.088,21 €899,35
You save 8%
Scharmüller Drawbar frame prepared for drawbar 75 kN, 3000 kg, rail 330 mm
Scharmüller
Category: Bearing supports | Colour: AGCO grey | Load capacity (kg): 3000 | D-value (kN): 75 | Detent pin Ø (mm): 25 | Rail width (mm): 330 | Version... More
Category: Bearing supports | Colour: AGCO grey | Load capacity (kg): 3...
€1.275,80 €1.054,38 €1.173,74 €970,03
You save 8%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€468,16 €386,91 €280,40 €231,74
You save 40%
Wabco Cover connector head yellow Fendt Farmer 240 S - 310
Wabco
Menke no.: 148707 More
Menke no.: 148707
€36,06 €29,80
Wabco Repair set antifreeze pump Fendt Farmer 240 S - 409
€264,90 €218,93 €243,71 €201,41
You save 8%
AKS-Dasis Pressure switch airco Fendt Farmer 304 - 312, Favorit 509 - 926
€43,18 €35,69 €39,73 €32,83
You save 8%
AKS-Dasis Aircon compressor 12 V, pulley-Ø 139 mm, 1 groove, 295 ccm
€613,43 €506,97 €564,36 €466,41
You save 8%
AKS-Dasis Magnetic coupling airco 12 V, Ø 132 mm, 1-groove Fendt
AKS-Dasis
12 V Ø 132 mm 1-groove Nippondenso 10P More
12 V Ø 132 mm 1-groove Nippondenso 10P
€1.007,66 €832,78 €927,05 €766,15
You save 8%
SACHS Thrust bearing 57 x 100 x 56 mm, KZIS-4
SACHS
Dimensions (mm): 57 x 100 x 56 | Notes: KZIS-4 More
Dimensions (mm): 57 x 100 x 56 | Notes: KZIS-4
€363,27 €300,22 €334,21 €276,21
You save 8%
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€90,40 €74,71 €83,17 €68,73
You save 8%
Tappet shank-Ø 18 mm, head-Ø 27 mm Fendt Farmer 102 - 311
Shaft Ø (mm): 18 | Head Ø (mm): 27 More
Shaft Ø (mm): 18 | Head Ø (mm): 27
€79,65 €65,83 €73,28 €60,56
You save 8%
Clutch cylinder Ø 23,81 mm Fendt Favorit 610 - 615
€247,45 €204,50 €227,65 €188,14
You save 8%
Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
You save 55%
FEBI Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
FEBI
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 270P, 275S, 280P, 304, 305, 306, 307, 308, 309, 310, 311, 312, GT 345, 360, 365, ... More
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 2...
€58,20 €48,10 €39,38 €32,55
You save 32%
FEBI Mirror 250 x 155 mm, unheated, rod Ø 10, 15, 18 mm
FEBI
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, 4210, 4220, 4230, 4240, 440, 540, 640, 740, 743, 644, 744, 745 S, 840, 844, 844 ... More
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, ...
€69,49 €57,43 €59,66 €49,31
You save 14%
FEBI Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
FEBI
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 270P, 275S, 280P, 304, 305, 306, 307, 308, 309, 310, 311, 312, GT 345, 360, 365, ... More
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 2...
€87,12 €72,00 €73,64 €60,86
You save 15%
BOSCH Starter motor 12 V, 2,4 kW, 9 teeth, mounting Ø 89 mm, clockwise
€597,13 €493,50 €575,09 €475,28
You save 4%
Roof hatch Fendt Farmer 240S-312, Favorit 610-615, GT 345-380
€328,92 €271,83 €302,61 €250,09
You save 8%
Thermostat Ø 38/38/24/18 mm, 75 °C, Fendt Favorit 600-615
Ø: 38/38/24/18 mm. Temperature: 75 °C. Menke no.: 59888. More
Ø: 38/38/24/18 mm. Temperature: 75 °C. Menke no.: 59888.
€141,66 €117,07 €130,33 €107,71
You save 8%
Rubber bush fuel tank Fendt
Description: Rubber mount for fuel tank. More
Description: Rubber mount for fuel tank.
€36,57 €30,22 €33,64 €27,81
You save 8%
Window profile for- and rear window Fendt
Description: für Front und Heckscheibe. More
Description: für Front und Heckscheibe.
€282,54 €233,50 €259,94 €214,82
You save 8%
Symbol work light yellow
Version: Yellow, rear work light. More
Version: Yellow, rear work light.
€3,35 €2,77
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€57,83 €47,79 €53,20 €43,97
You save 8%
LED work lights spotlight 31 W, 2359 lm, 148 x 95 x 58 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€54,24 €44,83 €49,90 €41,24
You save 8%
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€37,09 €30,65
Starter motor 12 V, 2,7 kW, 9 teeth, 231,5 mm, clockwise
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Holes / PCD (mm): 3 x 11,5 / 127,0 | Spacing flange to flywheel (mm): 22,... More
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teet...
€270,54 €223,59 €248,90 €205,70
You save 8%
Connecting rod bearing 62,20 mm, undersize 0,75 mm Fendt - pair
€23,84 €19,70
Wabco Pressure regulator with silencer 12,5 bar, M22 x 1,5 Fendt
Wabco
Pressure regulator cut-off pressure (bar): 12,5 More
Pressure regulator cut-off pressure (bar): 12,5
€602,79 €498,18
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€257,83 €213,08 €237,20 €196,04
You save 8%
Wabco Trailer control valve with drukbegrenzing without lever 8 bar, M22 x 1,5
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€484,47 €400,39 €445,71 €368,36
You save 8%
Internal plate PTO clutch 2 mm, 80,6 mm, 139,7 mm Fendt
Version: Thickness: 2.0 mm Inner: 80.6 mm Outer: 139.7 mm More
Version: Thickness: 2.0 mm Inner: 80.6 mm Outer: 139.7 mm
€11,38 €9,40
External plate PTO shaft 3,3 mm, inner 98 mm, outer 154,8 mm Fendt
Version: Thickness: 3.3 mm Inner: 98 mm Outer: 154.8 mm More
Version: Thickness: 3.3 mm Inner: 98 mm Outer: 154.8 mm
€37,15 €30,70
Replacement glass, main mirror right/left unheated 363 x 175 x 3 mm
Radius of curvature (mm): 2200 | Installation location: Right/left | Version: Unheated | Test mark: E1 01 14087 / e1 01*14019 / e1 02*14087 | Dimensio... More
Radius of curvature (mm): 2200 | Installation location: Right/left | V...
€36,85 €30,45
AKS-Dasis Aircon compressor 12 V, pulley Ø 137 mm, 1 groove Fendt
AKS-Dasis
Refrigerant: R 134a | Suitable oil: PAG 46 | No. of grooves: 1 | Nominal voltage (V): 12 | Oil quantity (ccm): 180 | Pulley Ø (mm): 137 More
Refrigerant: R 134a | Suitable oil: PAG 46 | No. of grooves: 1 | Nomin...
€899,49 €743,38 €827,53 €683,91
You save 8%
Rotary switch digital display, 5 blade connections Fendt
Version: For digital display (clock) with 5 blade terminals More
Version: For digital display (clock) with 5 blade terminals
€29,83 €24,65
SACHS Clutch plate 360 ZCE sintered, 41 x 45, 22 splines Fendt Favorit
SACHS
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintere...
€789,78 €652,71 €726,60 €600,49
You save 8%
Thrust bearing 60 x 104 x 93 mm Fendt Favorit 611 - 615
Dimensions (mm): 60 x 104 x 93 More
Dimensions (mm): 60 x 104 x 93
€432,45 €357,40 €397,85 €328,81
You save 8%
Alternator 14 V / 120 A, flange 56 mm
Additional information: With W connection | Nominal values (V / A): 14 / 120 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,2 / 85,0 | Pulley... More
Additional information: With W connection | Nominal values (V / A): 14...
€185,68 €153,45 €170,83 €141,18
You save 8%
Elring Cylinder head gasket set 1,4 mm, combined soft material/metal gasket engine TD226B
Showing 97 - 144 of 546

Fendt Favorit 612 (Typ 383) specifications

The Fendt Favorit 612 LSA carries the internal type designation T 383 and was built from 1983 to 1993. Within the Favorit 600 series, the 612 occupies a particular position: it was the only model that had been delivered exclusively with four-wheel drive since its introduction in 1968. A rear-wheel drive version only became available in 1974, but the LSA series under Typ 383 was always built exclusively with four-wheel drive. The LS version with rear-wheel drive falls under Typ FWA 283.

There are two production phases. The first (chassis number T 383.210, 1983 to 1987) covers 1,448 units with 135 hp. The second phase (chassis number T 383.211, 1988 to 1993) covers 1,589 units with 145 hp. In 1987, Fendt introduced the Duospeed drive system and the electronically controlled differential lock on the revised 612 LSA. An optional on-board computer was available for processing and storing operational data.

Engine

The Favorit 612 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. The engine is fitted with Rotocap valves, ring carrier pistons, piston crown cooling, a dry air filter with pre-cleaner, an inline injection pump with governor, a multi-hole injector, an oil cooler, a seven-bearing crankshaft, a gear-driven camshaft, a viscous fan, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,234 cc in the first phase and 6,240 cc in the second phase.

In the first production phase (1983 to 1987), the engine produces 135 hp. In the second phase (1988 to 1993), output was increased to 145 hp. The torque converter increases torque by up to 30 percent. The lock-up clutch connects engine and gearbox depending on load at 1,600 to 1,900 rpm, reducing or eliminating the need to change gear under load.

Transmission and travel speed

The 612 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox type T 3450 with side-mounted gear selection. The change gearbox has six normal gears and four creep gears. The fine-step section has three positions: slow, fast and reverse. In reverse, sixth gear is locked out. Top speed is 40 km/h in the standard version. There was also an extremely rare 50 km/h version with a modified final drive, achieving approximately 45 km/h in practice. From 1987, the Duospeed gearbox was available, enabling a continuously variable drive range with four power levels.

The main gearbox has four pre-selectable speed ranges: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute. Maximum lift capacity of the rear three-point hitch is 6,000 kg. The permissible front axle load is 4,000 kg and the rear axle load 6,000 kg.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes, drive and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft brake acting as a disc brake operates on the four-wheel drive. When the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. The front planetary oscillating axle has an oscillation angle of up to 12 degrees. The rear axle features an electronically controlled differential lock that can be engaged automatically. Steering is hydrostatically assisted.

Dimensions and weight

  • Length: 470 cm
  • Width: 238 cm
  • Height: 289 cm
  • Turning radius: 5.7 m
  • Unladen weight: 6,315 kg
  • Fuel tank: 222 litres

Standard tyre sizes are 16.9-26 at the front and 18.4R38 or 20.8R38 at the rear depending on the version.

Difference from the 612 LS (Typ 283)

A point that regularly comes up is the difference between Typ 383 and Typ 283. The Typ 283 is the LS series with rear-wheel drive and a ZF T 3445 gearbox. The Typ 383 has four-wheel drive as standard, a slightly differently configured ZF T 3450 gearbox, a higher hydraulic pump output and higher permissible axle loads. In addition, the Typ 383 received the Duospeed drive system and the electronically controlled differential lock in its second phase, which the Typ 283 does not have.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart