Menu
EUR

Tractor parts Fendt Favorit 612 (Typ 383)

Looking for parts for your Fendt Favorit 612 (Typ 383) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

546 parts found for Fendt Favorit 612 (Typ 383)
Show:
Handle right and left Fendt Farmer 240 S (Typ 294), GT 395
€40,90 €33,80 €37,63 €31,10
You save 8%
Spacer pipe three-point 15 x 10 x 13,6 mm Fendt Farmer, Favorit
A: 15 mm. B: 10 mm. C: 13,6 mm. More
A: 15 mm. B: 10 mm. C: 13,6 mm.
€2,24 €1,85
Venting valve M42 x 2, 83 mm Fendt, Massey Ferguson
A: 83 mm. B: 44 mm. C: M42 x 2 mm. D: 78 mm. E: 65 mm. Volume: 0,00055 m³. F: 46 mm. More
A: 83 mm. B: 44 mm. C: M42 x 2 mm. D: 78 mm. E: 65 mm. Volume: 0,00055...
€66,89 €55,28 €61,54 €50,86
You save 8%
Clamp
Brand: Fendt. More
Brand: Fendt.
€12,70 €10,50
Cut-out switch starter motor 42 V, 0,5 A, solenoid switch
Version: Solenoid switch, 42 V / 0.5 A, 2 blade terminals. More
Version: Solenoid switch, 42 V / 0.5 A, 2 blade terminals.
€55,99 €46,28
Temperature switch, oil temperature 102 °C, M14 x 1,5, 6 - 24 V
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1.5, Contact closes as the temperature increases, Outlet: 1-pin via earth, Switchi... More
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1....
€87,24 €72,10 €80,26 €66,33
You save 8%
Operating hours counter with connection cable, 2 blade connections
Version: Connection cable with 2 blade terminal connections. More
Version: Connection cable with 2 blade terminal connections.
€485,57 €401,30
HELLA Symbol windshield wiper / -nozzle green
HELLA
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Scheibenwischer / - wascher. More
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA ...
€3,00 €2,48
Push button switch lift / lower 12 / 24 V, yellow, 4 blade terminals
Version: 12/24 V, Yellow button, without lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (S1- S- 01- 0), Dustproof and splashproof. More
Version: 12/24 V, Yellow button, without lock, Ø 30 mm, 4 blade termi...
€31,51 €26,04
Start switch 12 V / 24 V, built-in-Ø 26,5 mm - 2 keys
Version: • With 2 moulded reversible safety keys made of nickel silver, • For central locking, • Waterproof DIN 40050, IP64, • Dustproof and w... More
Version: • With 2 moulded reversible safety keys made of nickel silv...
€54,72 €45,22 €50,34 €41,61
You save 8%
HELLA Rocker switch work light locks in place, 4 connections
HELLA
Version: Single-stage, with circuit, with location and function light, rocker operation. To operate: Kippbetätigung. Switching function: mit Komfortf... More
Version: Single-stage, with circuit, with location and function light,...
€22,96 €18,98
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
HELLA Plug Bilux H4, R2, base P 45t / P 14,5 s, 3-pin
HELLA
Bulb: H4, R2 (Bilux). Socket: P 45 t / P 14.5 s. Number of pins: 3. Type: Halogen bulb. Additional information: • Battery terminal design: without e... More
Bulb: H4, R2 (Bilux). Socket: P 45 t / P 14.5 s. Number of pins: 3. Ty...
€14,20 €11,74
Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
Version: 12 V / 30- 40 A, Without holder, 5-pin, flat plug connection 6.3 mm, With resistor for suppressing inductive interference voltage peaks. Colo... More
Version: 12 V / 30- 40 A, Without holder, 5-pin, flat plug connection ...
€5,55 €4,59
HELLA Glass rear light right, 3 light functions, lamp P21W, R10W
HELLA
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, 1640F, 1840F, 1850F, 1950F, 2250F, 2650F, 1550, 1640, 1750, 1840, 1850... More
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850...
€25,60 €21,16
FLEETGUARD Getriebeöl filters HF35309
€112,05 €92,60 €103,09 €85,20
You save 8%
Step 335 x 175 x 35 mm Fendt Farmer, Favorit, GT
Tractor types: Fendt Farmer 240S, 250S, 260P, 260S, 270P, 275S, 280P, 280S, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 409, 410, 411, 412, 509,... More
Tractor types: Fendt Farmer 240S, 250S, 260P, 260S, 270P, 275S, 280P, ...
€68,33 €56,47 €62,86 €51,95
You save 8%
Stabilus Gas strut door 100 N, 500 mm, stroke 203 mm Fendt
Stabilus
To fit as: Fendt Door More
To fit as: Fendt Door
€33,31 €27,53 €30,65 €25,33
You save 8%
Pipe set steering valve double-acting Fendt Farmer, GT, Favorit
€288,36 €238,31 €265,29 €219,25
You save 8%
Clutch plate 360 ZCE 41 x 45, 22 splines sintered Fendt
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 41 x 45, 22 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€652,15 €538,97 €599,98 €495,85
You save 8%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, Ø 89 mm, angle l 30
€466,72 €385,72 €279,54 €231,03
You save 40%
Wabco Air compressor 10 bar, 159 cm³, piston Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3...
€1.108,29 €915,94 €1.062,09 €877,76
You save 4%
Repair set clutch cylinder DOT4 Fendt Favorit 600-615
Medium: DOT4. Additional information: With piston. More
Medium: DOT4. Additional information: With piston.
€71,54 €59,12 €65,82 €54,39
You save 8%
Wabco Connector head yellow brake line M16 x 1,5, vehicle
Wabco
Version: Yellow, brake line. Connection: M16 x 1.5. Operating pressure max.: 10.0 bar. Vehicle/application: Yellow, brake, towing vehicle. More
Version: Yellow, brake line. Connection: M16 x 1.5. Operating pressure...
€28,66 €23,69
Pressure gauge 0 - 30 bar, Ø 52 mm, M12 x 1,5, 12 V, 2 W Fendt
€210,18 €173,70 €193,37 €159,81
You save 8%
Bush foot brake Fendt Favorit 600-615
€319,07 €263,69 €293,54 €242,60
You save 8%
Protective cap brake cylinder DOT4 Fendt Favorit 600-615
€21,51 €17,78
Hosetail brake line Fendt
Gaiter hand brake lever Fendt
€72,60 €60,00 €66,79 €55,20
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 135 mm Fendt
Version: Length 135 mm, 1 3/8", 6 grooves. More
Version: Length 135 mm, 1 3/8", 6 grooves.
€807,27 €667,17 €742,69 €613,79
You save 8%
Gasket manual transmission top Fendt Favorit 600-615
€54,80 €45,29 €50,42 €41,67
You save 8%
Walterscheid Flange hitch manual pin 31 mm, 160 x 100 mm, M21, 2000 kg
Walterscheid
Lock: Manual pin. Hole pattern: 160 x 100 mm. Load capacity: 2000 kg. D-value: 92,0 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. Description: Thi... More
Lock: Manual pin. Hole pattern: 160 x 100 mm. Load capacity: 2000 kg. ...
€755,69 €624,54 €597,45 €493,76
You save 21%
Door handle, right and left
To fit as Fendt. More
To fit as Fendt.
€68,69 €56,77 €63,19 €52,23
You save 8%
BOSCH Injection nozzle DLLB 151 S 854, S 2 mm, Fendt Farmer 309, Favorit 612-615
BOSCH
GRANIT no.: 38006008. S: 2 mm. Reference no.: F184230710162. Bosch type formula: DLLB 151 S 854. More
GRANIT no.: 38006008. S: 2 mm. Reference no.: F184230710162. Bosch typ...
€72,35 €59,79 €61,32 €50,68
You save 15%
Feed pump 3 hole, hole spacing 50 x 34 mm, flange 23 mm
Version: 3 holes, Vertical hole spacing = 50 mm, Horizontal hole spacing = 34 mm, Flange to roller end = 23 mm. More
Version: 3 holes, Vertical hole spacing = 50 mm, Horizontal hole spaci...
€142,64 €117,88 €131,23 €108,45
You save 8%
VICTOR REINZ Crankshaft seal rear MWM, Fendt
€105,19 €86,93 €96,77 €79,98
You save 8%
VICTOR REINZ Oil sump gasket engine D208-6 - D227-6 Fendt Favorit 4-615LSA
€69,70 €57,60 €64,12 €53,00
You save 8%
Push rod Fendt, Case IH, Steyr
Menke no.: 210255. More
Menke no.: 210255.
€52,59 €43,46 €48,38 €39,99
You save 8%
V-belt pulley Fendt
€156,36 €129,22 €143,85 €118,89
You save 8%
Rubber elbow to heating fan Ø 15 mm Fendt
€30,99 €25,61
V-belt set with compressed air Fendt Favorit 600-615
Version: With compressed air. More
Version: With compressed air.
€19,43 €16,05
Radiator hose Ø 18 mm, length 1000 mm Fendt
Inner Ø: 18 mm. Length: 1000 mm. More
Inner Ø: 18 mm. Length: 1000 mm.
€43,88 €36,26 €40,37 €33,36
You save 8%
Hose elbow heating Ø 18 mm Fendt
Inner Ø: 18 mm. More
Inner Ø: 18 mm.
€9,14 €7,55
Radiator hose cylinder head and air compressor inner-Ø 22 mm, 1000 mm
Inner Ø: 22 mm. Length: 1000 mm. More
Inner Ø: 22 mm. Length: 1000 mm.
€45,33 €37,46 €41,70 €34,47
You save 8%
Showing 241 - 288 of 546

Fendt Favorit 612 (Typ 383) specifications

The Fendt Favorit 612 LSA carries the internal type designation T 383 and was built from 1983 to 1993. Within the Favorit 600 series, the 612 occupies a particular position: it was the only model that had been delivered exclusively with four-wheel drive since its introduction in 1968. A rear-wheel drive version only became available in 1974, but the LSA series under Typ 383 was always built exclusively with four-wheel drive. The LS version with rear-wheel drive falls under Typ FWA 283.

There are two production phases. The first (chassis number T 383.210, 1983 to 1987) covers 1,448 units with 135 hp. The second phase (chassis number T 383.211, 1988 to 1993) covers 1,589 units with 145 hp. In 1987, Fendt introduced the Duospeed drive system and the electronically controlled differential lock on the revised 612 LSA. An optional on-board computer was available for processing and storing operational data.

Engine

The Favorit 612 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. The engine is fitted with Rotocap valves, ring carrier pistons, piston crown cooling, a dry air filter with pre-cleaner, an inline injection pump with governor, a multi-hole injector, an oil cooler, a seven-bearing crankshaft, a gear-driven camshaft, a viscous fan, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,234 cc in the first phase and 6,240 cc in the second phase.

In the first production phase (1983 to 1987), the engine produces 135 hp. In the second phase (1988 to 1993), output was increased to 145 hp. The torque converter increases torque by up to 30 percent. The lock-up clutch connects engine and gearbox depending on load at 1,600 to 1,900 rpm, reducing or eliminating the need to change gear under load.

Transmission and travel speed

The 612 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox type T 3450 with side-mounted gear selection. The change gearbox has six normal gears and four creep gears. The fine-step section has three positions: slow, fast and reverse. In reverse, sixth gear is locked out. Top speed is 40 km/h in the standard version. There was also an extremely rare 50 km/h version with a modified final drive, achieving approximately 45 km/h in practice. From 1987, the Duospeed gearbox was available, enabling a continuously variable drive range with four power levels.

The main gearbox has four pre-selectable speed ranges: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute. Maximum lift capacity of the rear three-point hitch is 6,000 kg. The permissible front axle load is 4,000 kg and the rear axle load 6,000 kg.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes, drive and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft brake acting as a disc brake operates on the four-wheel drive. When the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. The front planetary oscillating axle has an oscillation angle of up to 12 degrees. The rear axle features an electronically controlled differential lock that can be engaged automatically. Steering is hydrostatically assisted.

Dimensions and weight

  • Length: 470 cm
  • Width: 238 cm
  • Height: 289 cm
  • Turning radius: 5.7 m
  • Unladen weight: 6,315 kg
  • Fuel tank: 222 litres

Standard tyre sizes are 16.9-26 at the front and 18.4R38 or 20.8R38 at the rear depending on the version.

Difference from the 612 LS (Typ 283)

A point that regularly comes up is the difference between Typ 383 and Typ 283. The Typ 283 is the LS series with rear-wheel drive and a ZF T 3445 gearbox. The Typ 383 has four-wheel drive as standard, a slightly differently configured ZF T 3450 gearbox, a higher hydraulic pump output and higher permissible axle loads. In addition, the Typ 383 received the Duospeed drive system and the electronically controlled differential lock in its second phase, which the Typ 283 does not have.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart