Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

535 parts found for Fendt Favorit 615 (Typ 385)
Show:
Gasket exhaust Fendt Favorit 600-615
Gasket exhaust Fendt Favorit 600-615
€22,21 €18,36
 
Crankshaft seal rear outer-Ø 130 mm, inner-Ø 110 mm, width 13 mm
Crankshaft seal rear outer-Ø 130 mm, inner-Ø 110 mm, width 13 mm
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm.
€26,36 €21,79
 
Piston, complete Fendt Farmer 304-312, Favorit 509-615
8%
Piston, complete Fendt Farmer 304-312, Favorit 509-615
Menke no.: 208848.
€82,93 €68,54 €76,30 €63,05
 
Set of parts feed pump Ø 29/35 mm, height 53 mm engine For 314
Set of parts feed pump Ø 29/35 mm, height 53 mm engine For 314
Dimensions: Ø 29/35 mm. Height: 53 mm.
€13,54 €11,19
 
Ball pin steel M6, wrench size 8, E 10 mm Fendt 7387MI, Xylon 524
Ball pin steel M6, wrench size 8, E 10 mm Fendt 7387MI, Xylon 524
A: M6 mm. SW: 8. E: 10 mm.
€5,78 €4,77
 
Bar three-point parts Fendt
Bar three-point parts Fendt
€31,11 €25,71
 
Guide ring Fendt
Guide ring Fendt
€19,54 €16,15
 
Angled screw lift arm M27 x 3 mm Fendt
8%
Angled screw lift arm M27 x 3 mm Fendt
Dimensions: Thread = M27 x 3 mm.
€80,43 €66,47 €74,00 €61,15
 
Adjusting nut for lower link strut M27 x 3 Fendt
8%
Adjusting nut for lower link strut M27 x 3 Fendt
Dimensions: Thread = M27 x 3 mm.
€58,94 €48,71 €54,22 €44,81
 
Pin for lifting strut top 25 x 110 mm Fendt Favorit 600-615
8%
Pin for lifting strut top 25 x 110 mm Fendt Favorit 600-615
Dimensions: 25 x 110 mm.
€33,70 €27,85 €31,00 €25,62
 
Gas strut roof window 120 N, 225 mm Fendt Farmer 240 S (Typ 294), GT 395
Gas strut roof window 120 N, 225 mm Fendt Farmer 240 S (Typ 294), GT 395
Newtons: 120. A: 225 mm. B: 130 mm. C: 6 mm. D: 6 mm. To fit: roof hatch. Form: ...
€31,20 €25,79
 
Spring driepuntcentrering Fendt
Spring driepuntcentrering Fendt
€21,80 €18,02
 
Spring plate fender Fendt
Spring plate fender Fendt
€12,28 €10,14
 
Scharmüller Drawbar frame 311/22/30, 2500 kg, Deutz-Fahr, Fendt
8%
Scharmüller
Drawbar frame 311/22/30, 2500 kg, Deutz-Fahr, Fendt
To fit as: Deutz-Fahr D-06 (10006-12006): 10006, 12006; Fendt Favorit 600 LS/LSA...
€1.458,18 €1.205,11 €1.341,53 €1.108,70
 
Cut-out switch starter motor solenoid switch 42 V, 0,5 A
Cut-out switch starter motor solenoid switch 42 V, 0,5 A
Version: Solenoid switch, 42 V / 0.5 A, With plug connection.
€35,83 €29,61
 
Temperature sender 6 - 24 V, M14 x 1,5, wrench size 19 mm, black
8%
Temperature sender 6 - 24 V, M14 x 1,5, wrench size 19 mm, black
Version: Connection type: 1 x 6.3 mm, Colour: black, Thread: M14 x 1.5, AF: 19.0...
€53,03 €43,83 €48,79 €40,32
 
Tank temperature gauge 12 volt
Tank temperature gauge 12 volt
Version: 12 V | To fit Fendt.
€1.093,42 €903,65
 
HELLA Symbol fan green
HELLA
Symbol fan green
Version: Green, fan. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. ...
€3,00 €2,48
 
Push button switch fan 12 / 24 V, button yellow, Ø 30 mm
8%
Push button switch fan 12 / 24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€47,74 €39,45 €43,92 €36,30
 
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
8%
SACEX
Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€42,68 €35,27 €39,27 €32,45
 
HELLA Work lamp flood beam H3 55 / 70 W, 153 x 93 x 92 mm, 12 / 24 V
4%
HELLA
Work lamp flood beam H3 55 / 70 W, 153 x 93 x 92 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 153 x 93 x ...
€47,85 €39,55 €46,08 €38,08
 
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
8%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€55,15 €45,58 €50,74 €41,93
 
HELLA Headlight insert left / right H4, 12 / 24 V, built-in
4%
HELLA
Headlight insert left / right H4, 12 / 24 V, built-in
Bulb: H4. To fit: 4551GA 004109021. Installation location: Left/right. Nominal v...
€69,32 €57,29 €66,75 €55,17
 
Pipe RKLE
8%
Pipe RKLE
€102,02 €84,31 €93,86 €77,57
 
Light housing
Light housing
€23,04 €19,04
 
Cover
8%
Cover
€57,95 €47,89 €53,31 €44,06
 
HELLA Work lamp spotlight H3 12 / 24 V, 158 x 162 x 127 mm, bracket assembly
4%
HELLA
Work lamp spotlight H3 12 / 24 V, 158 x 162 x 127 mm, bracket assembly
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 158 x 162 x...
€75,63 €62,50 €72,83 €60,19
 
BOSCH Relays make contact 12 V, 30 A, without bracket, 5-pin, sperdiode
BOSCH
Relays make contact 12 V, 30 A, without bracket, 5-pin, sperdiode
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With blocki...
€22,96 €18,98
 
Flasher unit electronic 12 V, 6 connections, with holder
8%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, ...
€50,77 €41,96 €46,71 €38,60
 
Grip hand brake lever Fendt
Grip hand brake lever Fendt
To fit as: Fendt Farmer 303, 304, 307, 308, 309, 310, 311, 312, Favorit 509, 510...
€13,03 €10,76
 
Seal feed pump
Seal feed pump
To fit as: Deutz DX 140, 145, 160
€2,89 €2,39
 
Universal joint 35 x 94,92 mm, maintenance-free
8%
Universal joint 35 x 94,92 mm, maintenance-free
A: 35 mm. B: 94,92 mm. Size: 94,92 x 94,92 x 35. Universal joint size: . Lubrica...
€174,08 €143,87 €160,15 €132,36
 
Wabco Compressor 10 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 28,5 mm
4%
Wabco
Compressor 10 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 28,5 mm
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.....
€2.677,49 €2.212,80 €2.565,88 €2.120,56
 
Brake disc Ø 270 mm, thickness 24 mm, 8 hole Fendt Favorit 611-615
8%
Brake disc Ø 270 mm, thickness 24 mm, 8 hole Fendt Favorit 611-615
€276,30 €228,35 €254,20 €210,08
 
Dust cap wheel brake cylinder DOT4 Fendt
Dust cap wheel brake cylinder DOT4 Fendt
Medium: DOT4.
€3,89 €3,21
 
U-gaiter brake cylinder DOT4 Fendt Favorit 600-615
U-gaiter brake cylinder DOT4 Fendt Favorit 600-615
Medium: DOT4.
€11,30 €9,34
 
Brake hose DOT4 Fendt
8%
Brake hose DOT4 Fendt
Medium: DOT4.
€137,00 €113,22 €126,04 €104,17
 
Ratchet pawl hand brake lever Fendt
8%
Ratchet pawl hand brake lever Fendt
€64,14 €53,01 €59,01 €48,77
 
Showing 289 - 336 of 535

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart