Menu
EUR

Fendt Favorit 816 tractor parts & technical data

Lighting, electrics, trailer couplings and plenty more: the Fendt Favorit 816 from the Favorit 800 series is listed here with more than 550 parts by model.

538 parts found for Fendt Favorit 816
Show:
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 ...
€60,65 €50,12
 
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
10%
GRANIT
Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Lig...
€51,14 €42,26 €46,25 €38,22
 
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. ...
€1,96 €1,62
 
Cobo Work lamp H3 55 / 70 W, square, 178 x 86 x 73 mm, 12 / 24 V
10%
Cobo
Work lamp H3 55 / 70 W, square, 178 x 86 x 73 mm, 12 / 24 V
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W x H x D: 1...
€59,80 €49,42 €54,10 €44,71
 
Tail light holder
10%
Tail light holder
€78,89 €65,20 €71,35 €58,97
 
Alternator 14 V / 150 A, form B, flange 56,0 mm
10%
Alternator 14 V / 150 A, form B, flange 56,0 mm
To fit as: Fendt, Hürlimann, Lamborghini, Same
€626,14 €517,47 €566,50 €468,18
 
MANN-FILTER Oil filter H724/3, HF35436
38%
MANN-FILTER
Oil filter H724/3, HF35436
€120,89 €99,91 €75,50 €62,40
 
MANN-FILTER Cab filter CUK4130/1
38%
MANN-FILTER
Cab filter CUK4130/1
€117,27 €96,92 €73,25 €60,54
 
HELLA Work lamp flood beam Double Beam H3 12 / 24 V, built-in, Fendt
HELLA
Work lamp flood beam Double Beam H3 12 / 24 V, built-in, Fendt
Light aperture (mm): 148 x 84 | Type: Double Beam H3 | Additional information: -...
€72,80 €60,17
 
Danfoss Orbitrol 4WD OSPC 150 LSR, 150 cm³ Fendt Favorit 816 - 926
5%
Danfoss
Orbitrol 4WD OSPC 150 LSR, 150 cm³ Fendt Favorit 816 - 926
Saugventil: Yes | Feedback: Load sensing without feedback | Schluckvolumen bei N...
€1.352,56 €1.117,82 €1.284,90 €1.061,90
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
38%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, fan
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation...
€448,64 €370,78 €280,40 €231,74
 
Knorr Bremse Antifreeze pump air pressure- / brake system, 684 g
5%
Knorr Bremse
Antifreeze pump air pressure- / brake system, 684 g
€268,44 €221,85 €255,00 €210,74
 
Bearing vane connection 90 x 140 x 24 mm Fendt
5%
Bearing vane connection 90 x 140 x 24 mm Fendt
Inner Ø (mm): 90 | Height 1 (mm): 24 | Outer Ø (mm): 140 | Dimensions (mm): 90 x...
€110,96 €91,70 €105,40 €87,11
 
GRANIT Oil seal turbo 65 x 85 x 10 mm Fendt Favorit 509 - 824
5%
GRANIT
Oil seal turbo 65 x 85 x 10 mm Fendt Favorit 509 - 824
Dimensions (mm): 65 x 85 x 10
€219,40 €181,32 €208,40 €172,23
 
GRANIT Holder work lamp right Fendt Farmer 240 S - 309
GRANIT
Holder work lamp right Fendt Farmer 240 S - 309
€24,85 €20,54
 
GRANIT Aircon compressor 10PA15 12 V, pulley Ø 132 mm, 1 groove
5%
GRANIT
Aircon compressor 10PA15 12 V, pulley Ø 132 mm, 1 groove
For compressor: 10PA15 | Reference no.: 851745N, QP10PA15-2540 | Oil quantity (c...
€546,01 €451,25 €518,70 €428,68
 
Denso Aircon compressor 12 V, Ø 130 mm, 1 groove Fendt Farmer
5%
Denso
Aircon compressor 12 V, Ø 130 mm, 1 groove Fendt Farmer
Dimensions W x H x D (mm): 204 x 128 | Fixing: DM | No. of grooves: 1 | Pulley Ø...
€982,35 €811,86 €933,20 €771,24
 
MAHLE Aircon compressor 12 V, Ø 133 mm, 1 groove Fendt
38%
MAHLE
Aircon compressor 12 V, Ø 133 mm, 1 groove Fendt
Nominal voltage (V): 12 | Fixing: DM | Refrigerant: R 134a | For compressor: 10P...
€592,67 €489,81 €370,40 €306,12
 
Pilot bearing 20 x 42 x 12 mm
Pilot bearing 20 x 42 x 12 mm
Dimensions (mm): 20 x 42 x 12
€7,30 €6,03
 
GRANIT Cover drive shaft outer-Ø 128 mm Fendt
5%
GRANIT
Cover drive shaft outer-Ø 128 mm Fendt
€106,00 €87,60 €100,70 €83,22
 
Seal kit Fendt Favorit 816 (Typ 816) - 926 (Typ 926)
5%
Seal kit Fendt Favorit 816 (Typ 816) - 926 (Typ 926)
€226,08 €186,84 €214,75 €177,48
 
Axial joint A 246 mm, C M30 x 1,5, D M28 x 1,5, Ø B 68 mm, Ø E 50 mm
5%
Axial joint A 246 mm, C M30 x 1,5, D M28 x 1,5, Ø B 68 mm, Ø E 50 mm
A: 246 mm. C: M30 x 1,5 mm. D: M28 x 1,5 mm. F: 32 °. Ø B: 68 mm. Ø E: 50 mm.
€123,08 €101,72 €116,90 €96,61
 
GRANIT Ball joint 430 mm, M27 x 1,5, M28 x 1,5, taper 29 - 33 mm
5%
GRANIT
Ball joint 430 mm, M27 x 1,5, M28 x 1,5, taper 29 - 33 mm
A: 430 mm. C: M27 x 1,5 mm. D: M28 x 1,5 mm. E: 29 mm. F: 33 mm. Taper: 29 - 33 ...
€167,10 €138,10 €158,70 €131,16
 
Showing 169 - 192 of 538

Fendt Favorit 816 parts for the cab, engine and electrics

A Fendt Favorit 816 with plenty of hours on the clock eventually needs attention to the small things: a handle that has worked loose, a rubber that has perished, a switch that no longer springs back. This page carries more than 550 parts for this type, from GRANIT, HELLA, Wabco, GRAMMER and ROCKINGER.

Putting the cab back in order

For the cab there are handles for the body panels, discs for the rear screen hinge, rubber discs and gas struts. On the dashboard you can replace push button switches, rocker switches and indicator symbols. A GRAMMER Maximo Professional tractor seat gives the driver a firm place to sit again.

A tip for the switches: write down the wire colours or take a photo before pulling the connector. On rocker switches the terminals sit close together, and a swapped wire only becomes obvious when the wrong function switches on.

Lights and electrics

Work lamps from HELLA and GRANIT come in several versions, along with holders and brackets to mount them. There are also alternators and seals for the fuel tank sensors.

Engine and cooling

  • coolant hoses and rubber elbows
  • gaskets for the water channel and engine
  • pins and small fixings
  • alternator

A rubber coolant elbow hardens over time and develops hairline cracks on the outer bend. Squeeze it with the engine cold. If it crackles or feels like plastic, change it at the next service rather than waiting for it to burst in the field.

A loose pin or a small holder can also be behind a rattle in the cab or a work lamp that keeps shaking. When you hear that kind of noise, check the fixings first before blaming the lamp or the panel itself. A gas strut that no longer holds the rear window up should be replaced together with the one on the other side, fitted with the rod in the same position as the old one. An alternator that is starting to fail often shows itself through a charge warning light that glows faintly at idle.

Type plate and the Favorit 800 series

The Favorit 816 is part of the Favorit 800 series. The type plate tells you exactly which type you have. Fendt parts often have a number stamped into them, and that number gives you certainty that the replacement matches.

The Fendt Favorit 818 and the Fendt Favorit 822 each have their own page with matching parts. Other Fendt machinery can be found under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart