Menu
EUR

Fendt Favorit 818 tractor parts & technical data

With more than 550 parts for the Fendt Favorit 818, this page covers lighting, electrics, trailer couplings and more, so you can quickly see what fits.

549 parts found for Fendt Favorit 818
Show:
GRANIT Spring three-point Fendt
€29,65 €24,50
Piston rod DW linkage Fendt
€497,19 €410,90 €472,30 €390,33
You save 5%
Nut for clevis lower Fendt
GRANIT Push button switch PTO shaft 48 V, button green, Ø 30 mm, stroke 5 mm
GRANIT
Version: 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof a... More
Version: 48 V switching voltage, Green button, make contact, Total but...
€34,19 €28,26 €32,45 €26,82
You save 5%
HELLA Work lamp flood beam H3 70 W, 158 x 162 x 127 mm, 12 / 24 V
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 158 x 162 x 127 mm. Mo... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€76,45 €63,18
GRANIT Battery changeover relay 12 V / 24 V with screw connection
GRANIT
Version: 12 V/24 V, With screw connections. More
Version: 12 V/24 V, With screw connections.
€385,65 €318,72
Starter ring gear Ø 380/352 mm, 125 teeth Fendt
Version: Ø 380/352 mm, 125 splines. More
Version: Ø 380/352 mm, 125 splines.
€906,56 €749,22 €861,20 €711,74
You save 5%
GRANIT Seal on the front cover Fendt Favorit 816-926, engine D0826
€42,79 €35,36 €40,65 €33,60
You save 5%
GRANIT V-belt pulley water pump Ø 148 / 172 mm Fendt Favorit 816-824
GRANIT
Dimensions: Hole 6 x Ø 9, Inner Ø 55, Outer Ø 148/172 mm. More
Dimensions: Hole 6 x Ø 9, Inner Ø 55, Outer Ø 148/172 mm.
€462,62 €382,33 €439,45 €363,18
You save 5%
GRANIT Rubber elbow to heating valve Fendt Favorit 816-824
€67,64 €55,90 €64,25 €53,10
You save 5%
GRANIT Foot throttle cable A 542 mm, B 346 mm Fendt Favorit 816-926
GRANIT
A: 542 mm. B: 346 mm. More
A: 542 mm. B: 346 mm.
€77,44 €64,00 €73,55 €60,79
You save 5%
GRANIT Connecting rod bearing Ø 65 mm Fendt Favorit 816-926, Xylon 520-524
€50,70 €41,90 €48,15 €39,79
You save 5%
GRANIT Strut right 30" tires Fendt Favorit 816-926, Fendt 916-930
GRANIT
Installation location: rechts. Version: 30" Bereifung. More
Installation location: rechts. Version: 30" Bereifung.
€736,29 €608,50 €699,45 €578,06
You save 5%
GRANIT Seal for tank sensor
€49,57 €40,97 €44,80 €37,02
You save 10%
Hall sensor 40 mm, engine speed B, PTO shaft C rear, E for
Version: 40 mm, engine speed B, rear PTO speed C, front PTO speed E. More
Version: 40 mm, engine speed B, rear PTO speed C, front PTO speed E.
€162,10 €133,97
Showing 529 - 549 of 549

Fendt Favorit 818 parts: switches, hoses, lights and seats

Most Favorit 818 tractors have plenty of hours behind them, and at that stage it is the details that keep you busy. A switch that sticks, a split coolant hose, a work lamp that gives up halfway through the evening. This page lists more than 550 new parts that fit the Favorit 818, from GRANIT, HELLA, GRAMMER, ROCKINGER, Wabco and others.

Switchgear in the cab

The consoles of the Favorit 818 carry a large number of push button and rocker switches, each with its own symbol. You can get these switches separately, together with the indicator symbols and the rubber surrounds. Work lamps with their holders and brackets are here too, as is an alternator to feed all those consumers.

Before you swap a rocker switch, take a photo of the back with every wire still in place. On illuminated switches the terminals sit close together, and a crossed wire only shows up once the function fails or the backlight stays on.

Cooling and engine

  • Coolant hoses, including moulded rubber elbows
  • Gaskets for the water channel
  • Seals for the fuel sensors
  • Discs, pins and bushes for pivots and linkages

Fit new hose clamps whenever you replace a coolant hose. Old clamps have bedded into the rubber and often fail to seal a fresh hose. Squeeze the old hose before throwing it away. If it feels soft or flaky inside, other hoses of the same age are likely in similar condition. After refilling, bleed the system and check the level again once the engine has been up to temperature.

If a work lamp keeps failing, look at its holder before blaming the lamp. A cracked bracket lets the lamp shake on every bump, and that vibration shortens its life considerably.

Seat and access

For the cab there are tractor seats, including air suspended models, along with gas struts and grab handles for the body panels. A loose handle is more than cosmetic, since you pull your full weight on it every time you climb in.

Finding the matching part

The Favorit 818 is part of the Fendt Favorit 800 series. The chassis number on the data plate helps, because parts can differ by production period within one series. Hoses, gaskets and switches often have a reference number moulded or printed on them, which is the quickest route to the right replacement.

Other Favorit 800 models

Each sister model has its own page with the parts for that tractor:

For all other Fendt tractors, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart