Menu
EUR

Fendt Favorit 926 tractor parts & technical data

More than 700 parts fit the Fendt Favorit 926 from the Favorit 900 series. You will find lighting, trailer couplings, electrics and more on this page.

698 parts found for Fendt Favorit 926
Show:
GRANIT Gas strut hood 30 N, 145 mm, stroke 30 mm Fendt
GRANIT
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1: 6 mm. d2: 15,6 mm. To fit: Bonnet. Form: 1. More
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1:...
€41,94 €34,66 €39,80 €32,89
You save 5%
Door lock, right Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€54,86 €45,34 €52,10 €43,06
You save 5%
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€36,24 €29,95 €34,40 €28,43
You save 5%
Bush for force sensor pin 37 x 45/54 x 44 mm Fendt, Massey Ferguson
Dimensions: 37 x 45/54 x 44 mm. More
Dimensions: 37 x 45/54 x 44 mm.
€75,14 €62,10 €71,35 €58,97
You save 5%
GRANIT Push rod 700 x 60 mm, eye-Ø 28 mm, thread 27 x 3 mm Fendt 819-939
GRANIT
Dimensions: 700 x 60 mm. Eye Ø: 28 mm. Width: 60 mm. Thread: 27 x 3 mm. Length: 700 mm. More
Dimensions: 700 x 60 mm. Eye Ø: 28 mm. Width: 60 mm. Thread: 27 x 3 m...
€275,81 €227,94 €262,00 €216,53
You save 5%
Venting valve M42 x 2, 83 mm Fendt, Massey Ferguson
A: 83 mm. B: 44 mm. C: M42 x 2 mm. D: 78 mm. E: 65 mm. Volume: 0,00055 m³. F: 46 mm. More
A: 83 mm. B: 44 mm. C: M42 x 2 mm. D: 78 mm. E: 65 mm. Volume: 0,00055...
€64,11 €52,98 €60,90 €50,33
You save 5%
Clevis joint head cat. 3, A 32 mm, d1 28 mm, L 63 mm
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 mm. Menke no.: 55291. More
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 ...
€85,18 €70,40 €80,90 €66,86
You save 5%
GRANIT Top link cat. 2, M30 x 3,5, 515 - 755 mm, hook/threaded spindle
GRANIT
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515 / 755 mm. E: 75 mm. H: 51 mm. Version: Standard. Type: Tail hook/ball joint. To... More
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515...
€175,33 €144,90 €158,60 €131,07
You save 10%
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
GRANIT Pin hood Fendt
€2,64 €2,18
Intermediate part for fender 145 mm Fendt
Dimensions: 145 mm. More
Dimensions: 145 mm.
€334,91 €276,79 €303,00 €250,41
You save 10%
GRANIT Extension right 155 mm Fendt Favorit 816-926, 712-930
GRANIT
Dimensions: 155 mm. More
Dimensions: 155 mm.
€421,50 €348,35
Intermediate part for 160 mm Fendt 712-930
Dimensions: 160 mm. More
Dimensions: 160 mm.
€619,15 €511,69
Disc for adjustable fender Fendt
€42,74 €35,32 €38,65 €31,94
You save 10%
GRANIT Detent linkage Fendt
€25,55 €21,12
Showing 361 - 384 of 698

Fendt Favorit 926 parts

A Favorit 926 that has done its hours still earns its keep, provided the small things are dealt with before they turn into big ones. This page brings together more than 700 replacement parts that fit the Favorit 926, from GRANIT and from HELLA, Scharmüller, Wabco and ROCKINGER.

Cooling hoses come first

Coolant hoses, such as the lower rubber elbow, are among the first parts an older Favorit asks for. With the engine warm, squeeze each hose. If one feels hard and cracks, or soft and swollen near the clamp, change it before it splits on the road. Use new hose clamps, tighten them without cutting into the rubber, and bleed the cooling system after topping up so no air pocket stays trapped near the thermostat.

Around the engine you will also find seals, for example for the tank sensor, seal kits, O-rings for the feed pump, and alternators.

Cab, lights and controls

  • Headlights for the left and right side, and work lamps including corner lights
  • Push button switches such as the hazard light switch
  • Potentiometers for the controls
  • Gas struts for the windscreen frame, handles and holders
  • Tractor seats for long days behind the wheel

A potentiometer tells the electronics where a lever or knob is set. As it wears, the controls start to respond jerkily or a function cuts out now and then. Move the lever slowly through its full travel and watch for hesitation. When you fit a new one, clean and dry the connector as well, because moisture in the plug causes exactly the same symptoms. After changing the hazard light switch, walk round the tractor and check that every indicator flashes.

At the back

For hitching up there are drawbars, automatic ones included, and pins. A worn pin in the drawbar shows up as play and knocking behind the tractor. Replace it early, because every jolt from the trailer makes the play worse.

Getting the right fit

Read the rating plate to confirm the tractor really is a Favorit 926. After that, the old part does the talking. Headlights and switches usually carry a maker's number, coolant hoses sometimes a moulded code. If nothing is legible, hold the old part next to the picture and compare connections and bends.

The Favorit 916 comes from the same Favorit 900 line and has its own page: Fendt Favorit 916. For any other Fendt, go to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart