Menu
EUR

Fendt Favorit 926 tractor parts & technical data

More than 700 parts fit the Fendt Favorit 926 from the Favorit 900 series. You will find lighting, trailer couplings, electrics and more on this page.

698 parts found for Fendt Favorit 926
Show:
Tank cap with ventilation lockable, tank collar Ø 106 mm
Filler neck Ø: 106 mm. More
Filler neck Ø: 106 mm.
€43,98 €36,35 €41,75 €34,50
You save 5%
Oil filler cap Fendt Favorit 816-926, Fendt 916-930, Xylon 520-524
Connecting rod bearing undersize, 69,90 mm Fendt
€137,11 €113,31 €130,25 €107,64
You save 5%
Gaiter for intake pipe Fendt Favorit 816-824, 916-926
€160,75 €132,85 €152,70 €126,20
You save 5%
GRANIT Hose intercooler Fendt Favorit 816-926, Fendt 916-930
€93,85 €77,56 €89,15 €73,68
You save 5%
GRANIT Seal oil return line turbocharger 71 x 34 mm, Ø 20 mm Fendt
GRANIT
Hole Ø: 9 mm. Width: 34 mm. Weight: 4 g. Inner Ø: 20 mm. Length: 71 mm. Thickness: 1,05 mm. More
Hole Ø: 9 mm. Width: 34 mm. Weight: 4 g. Inner Ø: 20 mm. Length: 71 ...
€11,45 €9,46
O-ring turbocharger to the air filter Ø 100 x 4 mm Fendt
Weight: 6 g. Inner Ø: 100 mm. Thickness: 4 mm. More
Weight: 6 g. Inner Ø: 100 mm. Thickness: 4 mm.
€32,30 €26,69
GRANIT Thread insert Fendt Farmer 200-270
€42,04 €34,74 €39,90 €32,98
You save 5%
GRANIT Gaiter exhaust Fendt 916-930
€89,16 €73,69 €84,70 €70,00
You save 5%
GRANIT Spring U-bolt lower exhaust Fendt
Gasket set engine MAN D 0824 - D 0836 Fendt
Menke no.: 208926. More
Menke no.: 208926.
€74,48 €61,55 €70,75 €58,47
You save 5%
Gasket steering box engine MAN D 0824 - D 0836 Fendt
€74,95 €61,94 €71,20 €58,84
You save 5%
Crankshaft seal rear Ø 110 x 130 x 13 mm Fendt
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. Material: FPM (fluoro rubber)/ACM (polyacrylic rubber) / PTFE (polytetrafluoroethylene)/ACM (polyacr... More
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. Material: FPM (fluor...
€35,10 €29,01
GRANIT O-ring feed pump Fendt
€11,10 €9,17
GRANIT O-ring feed pump Fendt Favorit 916-926, Fendt 916-930
€32,05 €26,49 €30,40 €25,12
You save 5%
GRANIT Gaiter between the tanks Fendt Favorit 916-926, Fendt 916-930
€135,28 €111,80 €128,50 €106,20
You save 5%
Breather filter Fendt Favorit 816-926, GT 390, 395
€83,26 €68,81 €79,00 €65,29
You save 5%
GRANIT Solenoid valve end plate Fendt
€383,39 €316,85 €364,20 €300,99
You save 5%
Piston rod Fendt Favorit 716, Fendt 916-930
€504,93 €417,30 €479,65 €396,41
You save 5%
GRAMMER Tractor seat Maximo XT Dynamic Plus MSG97AL/741 Fendt
GRAMMER
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 381 mm. Seat... More
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery typ...
€4.700,98 €3.885,11 €4.465,90 €3.690,83
You save 5%
Gas strut hood 850 N, 320 mm, stroke 119 mm Fendt
€83,32 €68,86 €79,15 €65,41
You save 5%
Showing 457 - 480 of 698

Fendt Favorit 926 parts

A Favorit 926 that has done its hours still earns its keep, provided the small things are dealt with before they turn into big ones. This page brings together more than 700 replacement parts that fit the Favorit 926, from GRANIT and from HELLA, Scharmüller, Wabco and ROCKINGER.

Cooling hoses come first

Coolant hoses, such as the lower rubber elbow, are among the first parts an older Favorit asks for. With the engine warm, squeeze each hose. If one feels hard and cracks, or soft and swollen near the clamp, change it before it splits on the road. Use new hose clamps, tighten them without cutting into the rubber, and bleed the cooling system after topping up so no air pocket stays trapped near the thermostat.

Around the engine you will also find seals, for example for the tank sensor, seal kits, O-rings for the feed pump, and alternators.

Cab, lights and controls

  • Headlights for the left and right side, and work lamps including corner lights
  • Push button switches such as the hazard light switch
  • Potentiometers for the controls
  • Gas struts for the windscreen frame, handles and holders
  • Tractor seats for long days behind the wheel

A potentiometer tells the electronics where a lever or knob is set. As it wears, the controls start to respond jerkily or a function cuts out now and then. Move the lever slowly through its full travel and watch for hesitation. When you fit a new one, clean and dry the connector as well, because moisture in the plug causes exactly the same symptoms. After changing the hazard light switch, walk round the tractor and check that every indicator flashes.

At the back

For hitching up there are drawbars, automatic ones included, and pins. A worn pin in the drawbar shows up as play and knocking behind the tractor. Replace it early, because every jolt from the trailer makes the play worse.

Getting the right fit

Read the rating plate to confirm the tractor really is a Favorit 926. After that, the old part does the talking. Headlights and switches usually carry a maker's number, coolant hoses sometimes a moulded code. If nothing is legible, hold the old part next to the picture and compare connections and bends.

The Favorit 916 comes from the same Favorit 900 line and has its own page: Fendt Favorit 916. For any other Fendt, go to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart