Menu
EUR

Fendt Favorit 926 tractor parts & technical data

More than 700 parts fit the Fendt Favorit 926 from the Favorit 900 series. You will find lighting, trailer couplings, electrics and more on this page.

698 parts found for Fendt Favorit 926
Show:
Push rod 720 x 60 mm, eye Ø 25,4 mm, thread 27 x 3 mm Fendt
5%
Push rod 720 x 60 mm, eye Ø 25,4 mm, thread 27 x 3 mm Fendt
Dimensions: 720 x 60 mm. Eye Ø: 25.4 mm. Width: 60 mm. Thread: 27 x 3 mm. Length...
€386,59 €319,50 €367,25 €303,51
 
GRANIT Pin support 20,3 x 130 mm Fendt
5%
GRANIT
Pin support 20,3 x 130 mm Fendt
Dimensions: 20.3 x 130 mm.
€78,53 €64,90 €74,60 €61,65
 
Locking plate Fendt Favorit 816-926, Fendt 916-939
5%
Locking plate Fendt Favorit 816-926, Fendt 916-939
€127,05 €105,00 €120,65 €99,71
 
Seal Fendt Farmer 200-300
Seal Fendt Farmer 200-300
€35,40 €29,26
 
Threaded spindle for lower link strut M27 x 3 mm, B 86 mm, G 153 mm Fendt
5%
Threaded spindle for lower link strut M27 x 3 mm, B 86 mm, G 153 mm Fendt
A: 28 mm. B: 86 mm. C: 41 mm. D: 76 mm. I: M27 x 2 mm. F: 63 mm. G: 153 mm.
€165,71 €136,95 €157,40 €130,08
 
GRANIT Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
5%
GRANIT
Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
€39,08 €32,30 €37,10 €30,66
 
GRANIT Holder three-point Fendt
GRANIT
Holder three-point Fendt
€16,70 €13,80
 
GRANIT Pin for linkage Fendt Favorit 816-926, Fendt 916-930
5%
GRANIT
Pin for linkage Fendt Favorit 816-926, Fendt 916-930
€54,61 €45,13 €51,85 €42,85
 
GRANIT Handle Fendt, Massey Ferguson
GRANIT
Handle Fendt, Massey Ferguson
€36,65 €30,29
 
Skid hood Fendt
Skid hood Fendt
€9,40 €7,77
 
GRANIT Strut right fender Fendt 916-930
5%
GRANIT
Strut right fender Fendt 916-930
Installation location: rechts. Version: 480/70-34, 520/70-34, 540/65-34, 600/70-...
€677,00 €559,50 €643,15 €531,53
 
GRANIT Strut left fender 30" tires Fendt
10%
GRANIT
Strut left fender 30" tires Fendt
Installation location: links. Version: 30" Bereifung.
€773,09 €638,92 €699,45 €578,06
 
GRANIT Disc rear screen hinge Fendt
GRANIT
Disc rear screen hinge Fendt
€1,70 €1,41
 
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
12%
Scharmüller
Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Appr...
€472,38 €390,40 €417,75 €345,25
 
GRANIT Buffer hood Fendt
GRANIT
Buffer hood Fendt
€8,15 €6,74
 
GRANIT Handle body parts Fendt
GRANIT
Handle body parts Fendt
€14,65 €12,11
 
Rubber plate instap Fendt
10%
Rubber plate instap Fendt
€91,10 €75,29 €82,40 €68,10
 
Solenoid switch clutch 42 V, 0,5 A, 10 W/VA, with cable and plug
Solenoid switch clutch 42 V, 0,5 A, 10 W/VA, with cable and plug
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug.
€67,20 €55,54
 
GRANIT Solenoid switch start interlock 42 V, 0,5 A, cable, connector
5%
GRANIT
Solenoid switch start interlock 42 V, 0,5 A, cable, connector
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug.
€57,17 €47,25 €54,30 €44,88
 
Contact switch idle plunger switch, plug connector blue
Contact switch idle plunger switch, plug connector blue
Version: Plug connection, blue.
€68,10 €56,28
 
GRANIT Contact switch start interlock mechanical, connector plug green
GRANIT
Contact switch start interlock mechanical, connector plug green
Version: Mechanical, connector plug green. Menke no.: 210039.
€86,65 €71,61
 
VDO Seal for tank sensor
VDO
Seal for tank sensor
€16,70 €13,80
 
GRANIT Pressure switch
GRANIT
Pressure switch
€32,00 €26,45
 
Showing 481 - 504 of 698

Fendt Favorit 926 parts

A Favorit 926 that has done its hours still earns its keep, provided the small things are dealt with before they turn into big ones. This page brings together more than 700 replacement parts that fit the Favorit 926, from GRANIT and from HELLA, Scharmüller, Wabco and ROCKINGER.

Cooling hoses come first

Coolant hoses, such as the lower rubber elbow, are among the first parts an older Favorit asks for. With the engine warm, squeeze each hose. If one feels hard and cracks, or soft and swollen near the clamp, change it before it splits on the road. Use new hose clamps, tighten them without cutting into the rubber, and bleed the cooling system after topping up so no air pocket stays trapped near the thermostat.

Around the engine you will also find seals, for example for the tank sensor, seal kits, O-rings for the feed pump, and alternators.

Cab, lights and controls

  • Headlights for the left and right side, and work lamps including corner lights
  • Push button switches such as the hazard light switch
  • Potentiometers for the controls
  • Gas struts for the windscreen frame, handles and holders
  • Tractor seats for long days behind the wheel

A potentiometer tells the electronics where a lever or knob is set. As it wears, the controls start to respond jerkily or a function cuts out now and then. Move the lever slowly through its full travel and watch for hesitation. When you fit a new one, clean and dry the connector as well, because moisture in the plug causes exactly the same symptoms. After changing the hazard light switch, walk round the tractor and check that every indicator flashes.

At the back

For hitching up there are drawbars, automatic ones included, and pins. A worn pin in the drawbar shows up as play and knocking behind the tractor. Replace it early, because every jolt from the trailer makes the play worse.

Getting the right fit

Read the rating plate to confirm the tractor really is a Favorit 926. After that, the old part does the talking. Headlights and switches usually carry a maker's number, coolant hoses sometimes a moulded code. If nothing is legible, hold the old part next to the picture and compare connections and bends.

The Favorit 916 comes from the same Favorit 900 line and has its own page: Fendt Favorit 916. For any other Fendt, go to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart