Menu
EUR

Fiat F 115 tractor parts & technical data

As part of the Winner F100 series, the Fiat F 115 is covered here with more than 200 parts. The main groups are trailer couplings, lighting and electrics.

193 parts found for Fiat F 115
Show:
FEBI Engine oil filter Ø 107,67 mm, height 129,92 mm, thread 3/4"-16 UNF
€59,44 €49,12 €10,98 €9,07
You save 82%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€936,88 €774,28 €740,70 €612,15
You save 21%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
Repair set clutch cylinder Fiat, Ford, McCormick, New Holland
€51,39 €42,47 €47,28 €39,07
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
AKS-Dasis Condenser without dryer Case IH, Fiat, Ford, New Holland
AKS-Dasis
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer More
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer
€580,51 €479,76 €534,07 €441,38
You save 8%
Expansion valve 3/8 - 5/8 inch o-ring
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€48,74 €40,28 €44,84 €37,06
You save 8%
AKS-Dasis Thermostat airco Case IH, Fiat, Ford, Laverda
AKS-Dasis
Version: For air conditioning system More
Version: For air conditioning system
€92,69 €76,60 €85,27 €70,48
You save 8%
Cobo Lamp glass right
Cobo
Installation location: Right. Menke no.: 55041. More
Installation location: Right. Menke no.: 55041.
€18,81 €15,55
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
MAHLE
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: V/TO | Suitable oil: PAG 46 | Pulley Ø (mm): 132 More
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Co...
€513,19 €424,12 €461,06 €381,04
You save 10%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€196,97 €162,79 €181,21 €149,76
You save 8%
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€85,99 €71,07 €79,11 €65,38
You save 8%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€58,64 €48,46 €53,95 €44,59
You save 8%
SANDEN Air conditioning compressor 12 V, pulley Ø 119 mm, 2 grooves, 200 ccm oil
SANDEN
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | Oil quantity (ccm): 200 | Refrigerant: R 134a More
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fi...
€732,23 €605,15 €673,65 €556,74
You save 8%
LUK Thrust bearing 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
LUK
Dimensions (mm): 65 x 115 x 30 More
Dimensions (mm): 65 x 115 x 30
€409,98 €338,83 €377,18 €311,72
You save 8%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Double gear transmission Case IH, Fiat, New Holland
€447,45 €369,79 €411,65 €340,21
You save 8%
LUK Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
LUK
Contents: Pressure plate 458133021410, clutch plate 458333007211 | Supplementary set: Without release bearing More
Contents: Pressure plate 458133021410, clutch plate 458333007211 | Sup...
€657,87 €543,69 €605,24 €500,20
You save 8%
Thrust bearing single 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
Dimensions (mm): 65 x 115 x 30 More
Dimensions (mm): 65 x 115 x 30
€126,14 €104,25 €116,05 €95,91
You save 8%
Starter motor 12V 3,0 kW, 9 teeth clockwise, 266,5 mm
€296,00 €244,63 €272,32 €225,06
You save 8%
Bush 14 teeth Fiat 90-90 - 110-90, F 100 - F 140, M 115 - M 160
€71,34 €58,96 €65,63 €54,24
You save 8%
Ball joint taper 20 - 22,2 mm, 95 mm, M24 x 1,5
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5. More
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5.
€53,78 €44,45 €49,48 €40,89
You save 8%
Linkage steering valve series 90, 94 and Winner
can be used in 90, 94 and Winner More
can be used in 90, 94 and Winner
€136,38 €112,71 €125,47 €103,69
You save 8%
Clutch slave cylinder Ø 19,9 mm, mineral oil
Hole Ø (mm): 19.9 More
Hole Ø (mm): 19.9
€58,64 €48,46 €53,95 €44,59
You save 8%
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
CARLISLE
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm More
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€35,28 €29,16 €32,46 €26,82
You save 8%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€485,74 €401,44 €446,88 €369,32
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 125 mm, 2 grooves
SANDEN
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity (ccm): 185 | Nominal voltage (V): 12 | Pulley Ø (mm): 125 | No. of grooves: 2 More
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity ...
€710,18 €586,93 €653,37 €539,97
You save 8%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm Fiat 980 - 1380
€95,83 €79,20 €88,16 €72,86
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Starter motor 12 V, 4,2 kW, 9 teeth, flange distance 30,0 mm
€656,78 €542,79 €393,37 €325,10
You save 40%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Single clutch 330 TBVP, flywheel 34 mm Fiat, Ford, New Holland
Flywheel dimension (mm): 34 (tief) | Additional information: Made in Germany More
Flywheel dimension (mm): 34 (tief) | Additional information: Made in G...
€293,16 €242,28 €269,71 €222,90
You save 8%
Repair set clutch cylinder Fiat, Ford
€43,03 €35,56 €39,59 €32,72
You save 8%
Aircon compressor 12 V, Ø 134 mm, 2 grooves, 135 ccm
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil quantity (ccm): 135 | Nominal voltage (V): 12 | Refrigerant: R 134a | Fixing: EM More
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil q...
€514,14 €424,91 €473,01 €390,92
You save 8%
LUK Clutch plate 45 x 50 mm, 18 splines, sintered Case IH, Fiat, Ford
LUK
Dimensions (mm): 45 x 50 18 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 45 x 50 18 grooves | Material specifications: Sintere...
€269,37 €222,62 €247,82 €204,81
You save 8%
HELLA Alternator 14 V, 65 A, without belt pulley
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 65 | Charging current (A): 65 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€318,07 €262,87 €245,07 €202,54
You save 23%
Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€53,78 €44,45 €49,48 €40,89
You save 8%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,61 €213,73
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€37,63 €31,10
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
Cobo Headlight dipped beam/main beam 12 V, R2, left/right Fiat
Cobo
Mounting type: Flush mounting | Light function: Dipped beam, full beam | Bulb: 12V45/40WAS / R2 or 12V45/40W halogen / R2 | Test mark: ECE | Additiona... More
Mounting type: Flush mounting | Light function: Dipped beam, full beam...
€134,22 €110,93 €123,48 €102,05
You save 8%
Scharmüller Drawbar 1335 mm, 120 x 60 mm, pin 50 mm, 118 kN, position 4
Scharmüller
Pin Ø (mm): 50 | Mounting position: 4 | Category: Zugpendel | Height (mm): 60 | Width (mm): 120 | Length (mm): 1335 | Colour: Pulver Beschichtung Sch... More
Pin Ø (mm): 50 | Mounting position: 4 | Category: Zugpendel | Height ...
€2.748,19 €2.271,23 €2.578,33 €2.130,85
You save 6%
Showing 1 - 48 of 193

Fiat F 115 parts for the cab, cooling and engine

A hard-working Fiat F 115 rarely gives up all at once. The rear window drops shut, the air conditioning blows warm, or the engine takes ages to reach temperature. This page brings together more than 200 parts that fit the F 115, including gas struts, aircon compressors, gaskets, thermostats and starter motors, from makers such as GRANIT, Cobo, Walterscheid, MAHLE and LUK.

Keeping the cab comfortable

The rear window gas struts take the load every time the window is opened, and once one weakens the glass either falls or hangs halfway. Replace them as a pair, even if only one feels soft. The other strut has done the same hours, and uneven force slowly twists the hinge. For the air conditioning there are compressors matched by pulley size and number of grooves. Check both on the unit you take off before ordering, and refill the system with the correct amount of compressor oil after fitting.

Engine seals and cooling

Around the engine, much of the work comes down to sealing. You will find gaskets, sealing rings, seal sets and O-rings, for instance for the pistons and the rear engine cover. Thermostats, secondary air filters and starter motors complete the picture. When you change a thermostat, always fit a new gasket. One that has already been compressed seldom seals a second time, and a weeping housing is the usual result. Ball joints and bushes take up play in the steering, while drawbars and pitons look after the hitch.

A starter that just clicks without turning often has a tired solenoid. Before replacing the whole starter motor, check the battery terminals and the heavy cable to the starter for corrosion. The secondary air filter sits inside the main element and protects the engine whenever the outer one leaks or is taken out for cleaning. Never blow it out, simply replace it. Play in a ball joint shows up quickest when someone rocks the steering wheel while you watch the joint. A joint that visibly moves or knocks should be changed before it wears the track rod and the tyres.

Matching the part to your tractor

The type plate confirms that you are working on an F 115 and not another tractor from the Winner F100 range. If the old part has a number stamped into it, compare it with the reference number shown with the product. That check pays off with the push button switches on the dash, because many of them look alike from the outside.

Got another tractor from this range in the yard as well? The Fiat F 100 and Fiat F 140 pages each show the parts that fit those models. Every other Fiat model can be reached through Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart