Menu
EUR

Fiat 70-66 tractor parts & technical data

Keep your Fiat 70-66 working. This overview shows more than 250 items for the 66 series, from lighting and electrics to brakes and transmission.

251 parts found for Fiat 70-66
Show:
Cobo Indicator/position light 169 x 62 x 90 mm, P21W, R5W left
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 mm. Form: Rectangular. Height: 62 mm. Dimensions W x H x D: 169 x 62 x 90 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 ...
€50,01 €41,33 €46,01 €38,02
You save 8%
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.616,17 €1.335,68 €1.271,24 €1.050,61
You save 21%
Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light function: Indicator, position light | Nominal voltage (V): 12 / 24 | Additional ... More
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light ...
€54,98 €45,44 €50,58 €41,80
You save 8%
LED main headlight 12/24 V, 205 x 165 x 84,5 mm, H4 Case IH, Fiat
Test mark: ECE R10, CE, UKCA, ROHS | Light colour (K): 6000 | Additional information: Luminous flux Theoretical Full beam: 5850 lm Dipped beam: 3000 l... More
Test mark: ECE R10, CE, UKCA, ROHS | Light colour (K): 6000 | Addition...
€154,04 €127,31 €141,72 €117,12
You save 8%
LED main headlight oval 155 x 102 x 80,5 mm, H4, 12/24 V, built-in
Additional information: Theoretical/effective luminous flux: Dipped beam: 2000/1400 lm Full beam: 4500/3000 lm [email protected] [email protected] [email protected] [email protected]... More
Additional information: Theoretical/effective luminous flux: Dipped be...
€113,61 €93,89 €104,52 €86,38
You save 8%
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€32,69 €27,02 €30,07 €24,86
You save 8%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
Bosch/Rexroth Hydraulic pump anticlockwise 11 cm³/rpm., taper 1:8, Ø 17,46
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1/... More
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating ...
€529,33 €437,46 €486,98 €402,47
You save 8%
Danfoss Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
Danfoss
Type: OSPC 100 ON / 150-1151 More
Type: OSPC 100 ON / 150-1151
€1.094,17 €904,27 €1.006,64 €831,93
You save 8%
LUK Clutch kit flywheel 2 mm raised double plate connection
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228009810, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€608,22 €502,66 €559,56 €462,45
You save 8%
LUK Double clutch 280, 35 x 40, 14 splines sintered Case IH, Fiat
LUK
Dimensions (mm): 35 x 40 14 grooves | Flywheel dimension (mm): 2 (erhöht) | Material specifications: Sintered clutch lining More
...
€656,42 €542,50 €603,91 €499,10
You save 8%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
You save 46%
Steering cylinder ball head eye Case IH, Fiat
€190,68 €157,59 €175,43 €144,98
You save 8%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€33,70 €27,85
Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€25,23 €20,85
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
You save 9%
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional information: Unheated | Installation location: Right/left | To fit: Case... More
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Add...
€503,82 €416,38 €463,51 €383,07
You save 8%
Cobo Lamp glass right
Cobo
Installation location: Right. Menke no.: 55041. More
Installation location: Right. Menke no.: 55041.
€18,81 €15,55
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€196,97 €162,79 €181,21 €149,76
You save 8%
Pilot bearing 17 x 47 x 14 mm
Dimensions (mm): 17 x 47 x 14 More
Dimensions (mm): 17 x 47 x 14
€6,59 €5,44
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125013 More
Reference no.: 5125013
€326,26 €269,64 €300,16 €248,07
You save 8%
HELLA Alternator 14 V / 33 A, pulley Ø 72 mm, 1 groove, Fiat, Ford, Laverda
HELLA
Pulley Ø (mm): 72 | Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information... More
Pulley Ø (mm): 72 | Nominal values (V / A): 14 / 33 | No. of grooves:...
€341,03 €281,84 €262,75 €217,15
You save 23%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€639,84 €528,79 €383,22 €316,71
You save 40%
Lateral strut right and left 318 mm, Ø 30 mm, ball Ø 19 mm Fiat
Ø A: 30 mm. Dimensions: Ball Ø = 19 mm. Length: 318 mm. More
Ø A: 30 mm. Dimensions: Ball Ø = 19 mm. Length: 318 mm.
€49,38 €40,81 €45,43 €37,55
You save 8%
Internal plate differential catch 2,4 mm, inner 91 mm, outer 140 mm
Version: Thickness: 2.4 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 2.4 mm Inner: 91 mm Outer: 140 mm 32 teeth
€30,49 €25,20
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€116,29 €96,11 €106,99 €88,42
You save 8%
Eaton Link wheel Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125007 More
Reference no.: 5125007
€300,25 €248,14 €276,23 €228,29
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€657,02 €542,99 €506,23 €418,37
You save 23%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€110,09 €90,98 €101,28 €83,70
You save 8%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Ball joint taper 20 - 22,2 mm, 95 mm, M24 x 1,5
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5. More
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5.
€53,78 €44,45 €49,48 €40,89
You save 8%
Linkage steering valve series 90, 94 and Winner
can be used in 90, 94 and Winner More
can be used in 90, 94 and Winner
€136,38 €112,71 €125,47 €103,69
You save 8%
LUK Clutch kit double plate connection without release bearing, 30,50 kg
LUK
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Supplementary set: Without release bearing | Connection: For vehicles with double-d... More
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Sup...
€758,84 €627,14 €698,13 €576,97
You save 8%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
Eaton As transmission Case IH, Fiat, Ford, New Holland, 3,10 kg
Eaton
Reference no.: 47132984 More
Reference no.: 47132984
€201,84 €166,81
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€288,43 €238,37 €211,40 €174,71
You save 27%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€657,40 €543,31 €590,62 €488,11
You save 10%
Steering cylinder eye-Ø left and right 25 mm, length 380 mm Fiat
€307,48 €254,12 €282,88 €233,79
You save 8%
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 mm. B: 31 mm. C: 12 mm. Ø D: 25 mm. Ø E: 20 mm. Ø F: 25 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€309,23 €255,56 €284,49 €235,12
You save 8%
KS Piston set complete Ø 104 mm, combustion chamber Ø 52,2 mm Fiat
KS
Dimensions: 3 rings, Ø 104 mm, gudgeon pin Ø 38 x 85 mm, combustion chamber Ø 52.2 mm, combustion chamber depth 22.5 mm, ring carrier piston, dry l... More
Dimensions: 3 rings, Ø 104 mm, gudgeon pin Ø 38 x 85 mm, combustion ...
€503,40 €416,03 €463,13 €382,75
You save 8%
Radiator with cap Case IH, Fiat
To fit as: Fiat Series 46: 55-46–65-46; Series 56: 55-56–70-56; Series 66: 55-66–80-66 S; Series 88: 55-88–70-88; Series 93: 60-93–72-93; Se... More
To fit as: Fiat Series 46: 55-46–65-46; Series 56: 55-56–70-56; Se...
€501,11 €414,14 €461,02 €381,01
You save 8%
Tube exhaust curved vertical enamelled 700 mm Fiat series 46-94
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700 mm. More
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700...
€49,96 €41,29 €45,96 €37,99
You save 8%
Cobo Work lamp H3 55 W, round, with switch, 12 V
Cobo
Bulb: 12V55W / H3. Form: Round. Nominal voltage: 12 V. Additional information: With switch. Bulbs included: No. More
Bulb: 12V55W / H3. Form: Round. Nominal voltage: 12 V. Additional info...
€72,06 €59,55 €66,30 €54,79
You save 8%
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€192,68 €159,24 €177,27 €146,50
You save 8%
Showing 1 - 48 of 251

Fiat 70-66 parts for the clutch, linkage and steering

A Fiat 70-66 that has done its hours tends to tell you where it hurts: a clutch that slips under load, a lift shaft weeping oil, steering with too much play. This page brings together more than 250 replacement parts that fit this tractor, made by GRANIT and by suppliers such as LUK, Eaton, Cobo and Bosch/Rexroth.

What you can fix with them

In the driveline there are double clutches, complete clutch kits and thrust bearings for the driving clutch, plus gear wheels. For the hydraulics you get hydraulic pumps, left and right lift rods and the sealing ring for the lifting shaft. The front end is covered by ball joints and steering cylinders. On the engine and electrical side you will find alternators, gear reduction starters and gaskets such as the oil sump gasket. Smaller items include O-rings for the brake cylinder, further sealing rings and replacement lamp glass for the lights.

Splitting the tractor once, not twice

If the 70-66 has to come apart for a new double clutch or clutch plate, fit a new thrust bearing at the same time. It costs little compared with splitting the tractor a second time, and a bearing that squeals or seizes will chew up the fingers of a new pressure plate surprisingly fast. While everything is open, look at the crankshaft seal and the flywheel face too. Oil contamination or deep scoring there will glaze a fresh plate in no time. With a hydraulic pump, check the direction of rotation first. Clockwise and anticlockwise versions look almost identical from the outside.

Tracking down play in steering and linkage

Jack up the front axle, hold the wheel at top and bottom and rock it. A knock at the ball joint means it is due for replacement, and leaving it only wears the steering cylinder and front tyres faster. A cylinder that weeps at the rod makes the steering vague, so you end up correcting all the time. Lift rods are worth a look too. A bent rod or worn eyes leave the implement hanging crooked, which is easiest to spot from behind with the linkage raised.

Matching the part to your tractor

The type plate gives you the model and serial number. The number cast or stamped into the old component is even more useful, usually on the alternator housing or the rim of a clutch cover. Enter that reference number in the shop and the matching replacement comes straight up. For lift rods and ball joints, measure the old item before ordering so length and taper agree.

Fiat sold the 70-66 alongside several close relatives in its 66 line. Each of those siblings has a page of its own, since parts can differ from model to model:

For every other Fiat tractor, start from Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart