Menu
EUR

Fiat F 140 tractor parts & technical data

Working on a Fiat F 140? More than 180 parts are listed on this page, with trailer couplings, lighting and electrics already filtered to this tractor model.

178 parts found for Fiat F 140
Show:
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€20,09 €16,60
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€936,88 €774,28 €740,70 €612,15
You save 21%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
Repair set clutch cylinder Fiat, Ford, McCormick, New Holland
€51,39 €42,47 €47,28 €39,07
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
AKS-Dasis Condenser without dryer Case IH, Fiat, Ford, New Holland
AKS-Dasis
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer More
Weight (kg): 3 | Weight (g): 3000 | Supplementary set: without dryer
€580,51 €479,76 €534,07 €441,38
You save 8%
Expansion valve 3/8 - 5/8 inch o-ring
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€48,74 €40,28 €44,84 €37,06
You save 8%
AKS-Dasis Thermostat airco Case IH, Fiat, Ford, Laverda
AKS-Dasis
Version: For air conditioning system More
Version: For air conditioning system
€92,69 €76,60 €85,27 €70,48
You save 8%
Cobo Lamp glass right
Cobo
Installation location: Right. Menke no.: 55041. More
Installation location: Right. Menke no.: 55041.
€18,81 €15,55
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
MAHLE
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: V/TO | Suitable oil: PAG 46 | Pulley Ø (mm): 132 More
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Co...
€513,19 €424,12 €461,06 €381,04
You save 10%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€196,97 €162,79 €181,21 €149,76
You save 8%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€58,64 €48,46 €53,95 €44,59
You save 8%
SANDEN Air conditioning compressor 12 V, pulley Ø 119 mm, 2 grooves, 200 ccm oil
SANDEN
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | Oil quantity (ccm): 200 | Refrigerant: R 134a More
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fi...
€732,23 €605,15 €673,65 €556,74
You save 8%
LUK Thrust bearing 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
LUK
Dimensions (mm): 65 x 115 x 30 More
Dimensions (mm): 65 x 115 x 30
€409,98 €338,83 €377,18 €311,72
You save 8%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
Single clutch M 350, flywheel 34 mm Fiat
Additional information: Made in Germany | Flywheel dimension (mm): 34 (tief) More
Additional information: Made in Germany | Flywheel dimension (mm): 34 ...
€375,84 €310,61
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Thrust bearing single 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
Dimensions (mm): 65 x 115 x 30 More
Dimensions (mm): 65 x 115 x 30
€126,14 €104,25 €116,05 €95,91
You save 8%
Starter motor 12V 3,0 kW, 9 teeth clockwise, 266,5 mm
€296,00 €244,63 €272,32 €225,06
You save 8%
Bush 14 teeth Fiat 90-90 - 110-90, F 100 - F 140, M 115 - M 160
€71,34 €58,96 €65,63 €54,24
You save 8%
Ball joint taper 20 - 22,2 mm, 95 mm, M24 x 1,5
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5. More
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5.
€53,78 €44,45 €49,48 €40,89
You save 8%
Linkage steering valve series 90, 94 and Winner
can be used in 90, 94 and Winner More
can be used in 90, 94 and Winner
€136,38 €112,71 €125,47 €103,69
You save 8%
LUK Clutch kit without release bearing Fiat, New Holland
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458135021510, clutch plate 458335012910 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€828,29 €684,54 €762,03 €629,77
You save 8%
LUK Single clutch 350TDVP 1400 - 1600 Kp Fiat, Ford
LUK
Flywheel dimension (mm): 34 (tief) | Contact pressure (Kp): 1400 - 1600 More
Flywheel dimension (mm): 34 (tief) | Contact pressure (Kp): 1400 - 160...
€378,17 €312,54 €347,92 €287,53
You save 8%
Clutch plate 350 45 x 50 mm, 18 splines Fiat
Dimensions (mm): 45 x 50, 18 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 45 x 50, 18 grooves | Material specifications: Sinter...
€282,20 €233,22 €259,62 €214,57
You save 8%
Clutch slave cylinder Ø 19,9 mm, mineral oil
Hole Ø (mm): 19.9 More
Hole Ø (mm): 19.9
€58,64 €48,46 €53,95 €44,59
You save 8%
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
CARLISLE
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm More
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€35,28 €29,16 €32,46 €26,82
You save 8%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€485,74 €401,44 €446,88 €369,32
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 125 mm, 2 grooves
SANDEN
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity (ccm): 185 | Nominal voltage (V): 12 | Pulley Ø (mm): 125 | No. of grooves: 2 More
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity ...
€710,18 €586,93 €653,37 €539,97
You save 8%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm Fiat 980 - 1380
€95,83 €79,20 €88,16 €72,86
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Starter motor 12 V, 4,2 kW, 9 teeth, flange distance 30,0 mm
€656,78 €542,79 €393,37 €325,10
You save 40%
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 mm. B: 31 mm. C: 12 mm. Ø D: 25 mm. Ø E: 20 mm. Ø F: 25 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€309,23 €255,56 €284,49 €235,12
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Repair set clutch cylinder Fiat, Ford
€43,03 €35,56 €39,59 €32,72
You save 8%
Aircon compressor 12 V, Ø 134 mm, 2 grooves, 135 ccm
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil quantity (ccm): 135 | Nominal voltage (V): 12 | Refrigerant: R 134a | Fixing: EM More
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil q...
€514,14 €424,91 €473,01 €390,92
You save 8%
LUK Clutch plate 350TDCA 45 x 50 mm, 18 splines, sintered Fiat
LUK
Dimensions (mm): 45 x 50 18 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 45 x 50 18 grooves | Material specifications: Sintere...
€380,85 €314,75 €350,38 €289,57
You save 8%
HELLA Alternator 14 V, 65 A, without belt pulley
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 65 | Charging current (A): 65 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€318,07 €262,87 €245,07 €202,54
You save 23%
Track rod 4WD 1760 mm, taper 20 - 22 mm
A: 1760 mm. C: 20 - 22 mm. G: . More
A: 1760 mm. C: 20 - 22 mm. G: .
€462,98 €382,63 €425,94 €352,02
You save 8%
Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€53,78 €44,45 €49,48 €40,89
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
Cobo Headlight dipped beam/main beam 12 V, R2, left/right Fiat
Cobo
Mounting type: Flush mounting | Light function: Dipped beam, full beam | Bulb: 12V45/40WAS / R2 or 12V45/40W halogen / R2 | Test mark: ECE | Additiona... More
Mounting type: Flush mounting | Light function: Dipped beam, full beam...
€134,22 €110,93 €123,48 €102,05
You save 8%
Scharmüller Drawbar 1335 mm, 120 x 60 mm, pin 50 mm, 118 kN, position 4
Scharmüller
Pin Ø (mm): 50 | Mounting position: 4 | Category: Zugpendel | Height (mm): 60 | Width (mm): 120 | Length (mm): 1335 | Colour: Pulver Beschichtung Sch... More
Pin Ø (mm): 50 | Mounting position: 4 | Category: Zugpendel | Height ...
€2.748,19 €2.271,23 €2.578,33 €2.130,85
You save 6%
Showing 1 - 48 of 178

Fiat F 140 parts for the hitch, electrics and engine

The rear end of a Fiat F 140 usually takes a beating from heavy trailers, and the coupling parts are the first to show it. This page holds more than 180 parts that fit the F 140, with brands such as GRANIT, Walterscheid, Cobo, MAHLE and LUK.

A worn piton or a ball with play sends a sharp knock through the drawbar every time you brake. Measure the ball or eye with a vernier caliper and compare it with a new one. If the wear has gone visibly oval, renew the matching pin and retaining clip at the same time rather than reusing them. Walterscheid is a familiar name for this kind of coupling.

Starting and charging

For the electrical side there are starter motors, alternators and push button switches. If the starter turns slowly with a fully charged battery, measure the voltage at the starter itself while cranking. A poor earth strap often mimics a failing starter, so rule that out before replacing anything. When an alternator stops charging, check belt tension and the plug first.

Engine bay and cab

Engine work calls for gaskets, for example between the turbocharger and the exhaust manifold, along with O-rings, seals, sealing rings and thermostats. Change a manifold gasket only on a cold engine, and swap any rusted nuts while you are there. In the cab, gas struts hold the rear window open and a fresh aircon compressor brings the cooling back for summer work. Ball joints and bushes remove slack from the steering.

If the old aircon compressor has seized, have the system flushed before fitting the new one, otherwise debris from the old unit ends up inside it. Evacuating and recharging is best left to someone with the right equipment. Fit rear window gas struts with the rod pointing down so the oil inside keeps the seal lubricated. A thermostat is easy to test in a pan of hot water, and if it does not open it has had its day. After replacing steering ball joints, have the tracking checked, since even a small error wears the front tyres quickly.

Getting the right fit

Start with the type plate on your tractor, then compare the number stamped on the old part with the reference number shown for the product. That avoids an alternator or compressor that looks identical but has different connections.

The F 140 belongs to the Winner F100 range together with the Fiat F 100 and the Fiat F 115, and each of them has its own page of matching parts. For the full line-up of the brand, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart