Menu
EUR

Jungheinrich TFG 40 forklift parts & technical data

Lighting is one of the groups among the more than 20 parts for the Jungheinrich TFG 40. Every item on this page is a match for this LPG forklift.

25 parts found for Jungheinrich TFG 40
Show:
GRANIT Seat cushion PVC, black, upper part 20 and 90
GRANIT
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A/20. Upholstery type: PVC. Description: 90/20... More
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, ...
€162,13 €133,99 €154,00 €127,27
You save 5%
Showing 25 - 25 of 25

Jungheinrich TFG 40 parts

Keeping an LPG forklift like the Jungheinrich TFG 40 running comes down to clean air, clean oil and a seat the operator can live with. This page brings together more than 20 replacement parts that fit the TFG 40, from HELLA, GRAMMER, GRANIT, FEBI and FLEETGUARD.

Filters for routine service

The air filter set for this truck consists of an outer element, AF25557, and an inner safety element, AF25558. Engine oil filters are listed too. Never blow out an air filter with compressed air, since it opens up tiny tears in the paper that you cannot see. Replace the outer element on time and change the inner one every second or third time. Check that the housing is clean and the sealing edge undamaged before closing it up, or the engine will draw dust past the filter.

Seat and operator area

  • A black fabric seat cushion for Jungheinrich and PVC back cushions
  • The Primo XM forklift seat with mechanical suspension
  • A lap belt and a shock absorber
  • A mounting strip with pressure switch, a cover and a hazard light symbol

Lighting and electrics

An H7 halogen bulb, a changeover relay and a round red reflector are on the page, together with a metal bracket wiper blade.

Identifying the right part

Use the data plate to confirm you are working on a TFG 40. After that, the number on the old part is your best reference, whether that is printed on a filter housing or on top of a relay. Seat cushions are chosen by the seat series on the label under the seat, MSG 65 for example. With an engine oil filter, also compare the diameter and thread against the old one so it seals properly on the engine.

Seat and belt on the TFG 40

The Primo XM has mechanical suspension. Set it to the weight of the operator so the seat does not bottom out over floor joints but does not feel rock hard either. Where several people share the truck across shifts, it is worth adjusting it at every change of driver. The separate fabric seat cushion swaps without taking the whole seat off. Give the lap belt a short, sharp pull at each service. It must lock and retract cleanly, and a frayed strap or a buckle that will not latch means a new belt straight away. The cover blanks off unused switch openings so dirt and moisture stay out of the panel.

The Jungheinrich parts page covers the remaining types from this maker if your TFG 40 is one of several.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart