Menu
EUR

Deutz-Fahr Agrotron 100 tractor parts & technical data

Lighting, trailer couplings and electrics are part of the more than 250 items that fit the Deutz-Fahr Agrotron 100, alongside many other parts on this page.

273 parts found for Deutz-Fahr Agrotron 100
Show:
VICTOR REINZ Exhaust manifold gasket
€6,30 €5,21
GRANIT Collet set
€5,85 €4,83
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
You save 5%
Cylinder head gasket 1,6 mm, 3 bores engine BF4M1012
€71,52 €59,11 €67,90 €56,12
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT High-pressure pump Fendt, Deutz-Fahr
€523,22 €432,41 €497,00 €410,74
You save 5%
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
GRANIT Mounting bracket force sensor pin Deutz-Fahr, Lamborghini
€82,04 €67,80 €77,90 €64,38
You save 5%
GRANIT Indicator/position light rectangular red P21W, R5W left
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Centa Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
Centa
Version: 2x 4 holes Size 28 More
Version: 2x 4 holes Size 28
€819,36 €677,16 €741,30 €612,64
You save 10%
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€768,76 €635,34 €730,30 €603,55
You save 5%
LUK Single clutch 330TBFR Deutz-Fahr Agrotron 4.70 - 6.20, 80 - 115
€351,32 €290,35 €333,75 €275,83
You save 5%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€507,13 €419,12 €388,30 €320,91
You save 23%
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
GRANIT Thrust bearing driving clutch closed version 65 x 97 x 23 mm
GRANIT
Dimensions (mm): 65 x 97 x 23 More
Dimensions (mm): 65 x 97 x 23
€79,10 €65,37 €75,10 €62,07
You save 5%
Elring Valve cover gasket inlet manifold Deutz engine BF6M1013
€49,38 €40,81 €46,90 €38,76
You save 5%
FEBI Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
You save 72%
Ball joint 340 mm, M22 x 1,5, M24 x 1,5, taper 24,6 - 28,5 mm
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€187,15 €154,67 €177,75 €146,90
You save 5%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
You save 5%
Showing 97 - 120 of 273

Deutz-Fahr Agrotron 100 parts for gaskets, belts and the cab

Oil weeping from the valve cover, coolant slowly disappearing or bubbles in the expansion tank: on an Agrotron 100 with a few hours on the clock, trouble often starts at a gasket. This page lists more than 250 new Deutz-Fahr Agrotron 100 parts, with VICTOR REINZ and Elring for the gaskets, alongside GRANIT, HELLA and ROCKINGER.

Head gasket thickness matters

For the engine there are cylinder head gaskets, valve cover gaskets, air receiver gaskets and crankshaft seals, plus seals for the hydraulic pump. Head gaskets come in different thicknesses, and the one you need depends on how far the pistons stand proud of the block. Copy the marking on the old gasket, and measure piston protrusion again if the block or pistons have been machined or replaced. A gasket that is too thin can let the pistons touch the valves.

Belts, starter and lighting

There are V-belts and starter motors for the engine. A belt that squeals on start-up or shows glazed flanks is due for replacement, and a new one should be re-tensioned after the first hours of work. Lighting is covered with work lamps and toggle switches for the driving lights.

If the starter turns slowly, measure battery voltage first and check the earth cable and terminals. A poor connection looks exactly like a worn starter from the outside. When fitting a new valve cover gasket, tighten the bolts evenly and not too hard, or the gasket squeezes out and starts leaking again.

Cab, steering and hitch

Gas struts hold the roof window and rear window open. When a window no longer stays up, replace both struts together so they push evenly. You will also find ball joints, wide-angle mirrors, automatic drawbars and Piton Fix hitches. A worn ball joint shows up as play in the steering wheel and a tractor that wanders on the road.

Getting the right part

The type plate tells you which Agrotron you have, which matters because many Agrotron models look very similar from the outside. With gaskets, compare the shape and bolt holes with the old one, and look for a reference number on the old part.

Other Agrotron models have separate pages with the parts that fit them:

All Deutz-Fahr tractors are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart