Menu
EUR

Deutz-Fahr DX 4.30 tractor parts & technical data

With more than 300 matching parts you can maintain the Deutz-Fahr DX 4.30 yourself. Electrics, trailer couplings and lighting for the DX 4 series are all here.

318 parts found for Deutz-Fahr DX 4.30
Show:
PROBOSS Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment, longitudinal adjustment, backrest tilt adjustment. Mechanical lumbar support... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€875,22 €723,32
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €169,17 €139,81
You save 8%
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, 4.10, 4.30, 4.50, 4.70,... More
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 2...
€48,96 €40,46
LED headlight dipped beam / main beam / marker light, 140 x 140 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam/full beam/position light. Installati... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€104,21 €86,12 €95,87 €79,23
You save 8%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €265,33 €219,28
You save 8%
Clutch kit double clutch Deutz-Fahr AgroPrima, AgroXtra, DX
Contents: Double clutch, clutch plate and 2x release bearing More
Contents: Double clutch, clutch plate and 2x release bearing
€1.138,27 €940,72 €1.097,21 €906,79
You save 4%
GRAMMER Seat MSG95G/721 air suspended 12 V, seat width 480 mm
GRAMMER
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 685 → 745 | Joystick console: Optional | On-board voltage (V): 12 | Restraint s... More
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 6...
€2.181,17 €1.802,62
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€197,74 €163,42 €181,92 €150,35
You save 8%
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.126,27 €930,80 €917,77 €758,49
You save 19%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€193,94 €160,28 €178,42 €147,46
You save 8%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,45 €225,99
You save 23%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €275,71 €227,86
You save 8%
Cylinder separate steering axle Deutz-Fahr DX 4.10-92, Series DX 4-6
€1.009,34 €834,17 €928,59 €767,43
You save 8%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
MAHLE
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | Charging current (A): 80 | Nominal voltage (V): 14 | Pulley Ø (mm): 6... More
Additional information: Dust-tight with W connection | Flange size (mm...
€358,59 €296,36 €214,78 €177,50
You save 40%
Drive shaft 1050 mm Deutz-Fahr DX 80 - 120, DX 4.10 - 6.05
€992,43 €820,19 €913,04 €754,57
You save 8%
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Voltage range (V): 10 - 30 | Power (watts): 60 | Protection class: IP6K9K / IP67 | W... More
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Volt...
€85,72 €70,84 €78,86 €65,18
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.132,30 €1.762,23
LUK Clutch kit double clutch Ø 310 mm Deutz-Fahr
LUK
Disc Ø (mm): 310 | Contents: Double clutch and clutch plate More
Disc Ø (mm): 310 | Contents: Double clutch and clutch plate
€1.123,75 €928,72 €1.083,85 €895,74
You save 4%
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €112,36 €92,86
You save 8%
AKS-Dasis Blower switch 3 link steps Deutz-Fahr DX 4.10 - DX 120
AKS-Dasis
Equipment: 3 switching stages More
Equipment: 3 switching stages
€43,95 €36,32 €40,43 €33,42
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
LUK
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€162,37 €134,19 €149,38 €123,45
You save 8%
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 | Installation angle (°): l 60 | Nominal voltage (V): 14 | Direction of rotatio... More
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 ...
€170,34 €140,78 €156,71 €129,51
You save 8%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€651,63 €538,54 €627,60 €518,67
You save 4%
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | Guide width (mm): 32 | Rail width (mm): 330 | Version: Prepared for d... More
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (k...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
LUK
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€226,14 €186,89 €208,05 €171,94
You save 8%
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23 More
Dimensions (mm): 65 x 97 x 23
€82,54 €68,21 €75,94 €62,76
You save 8%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€334,90 €276,78 €200,59 €165,78
You save 40%
Elring Cylinder head gasket set without cylinder head gasket engine FL912, FL913, BFL913
Elring
Supplementary set: For one cylinder head | Additional information: Without cylinder head gasket More
Supplementary set: For one cylinder head | Additional information: Wit...
€34,58 €28,57
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,94 €328,05
You save 40%
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
€410,48 €339,24 €377,64 €312,10
You save 8%
Mass balancing Deutz-Fahr engine BF4L913, BF4L913T
€1.262,02 €1.042,99 €1.161,06 €959,55
You save 8%
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €150,78 €124,61
You save 8%
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€37,09 €30,65
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Walterscheid
Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, RREG 2009/144/EC, VO (EU) 2... More
Description: This product is an automatic trailer hitch. The jaw dimen...
€2.193,20 €1.812,56 €1.733,96 €1.433,03
You save 21%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
LUK Double clutch 310/310TGU 41 x 45 mm, 21 splines sintered Deutz-Fahr
LUK
Material specifications: Sintered clutch lining | Dimensions (mm): 41 x 45, 21 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 41 ...
€1.194,07 €986,83 €1.148,54 €949,21
You save 4%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,77 €46,09
You save 8%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€503,99 €416,52 €388,33 €320,93
You save 23%
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,65 €9,63
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt width (mm) / type: 9,7 | Installation angle (°): l + r 60 | Nominal volta... More
Additional information: With W connection | Charging current (A): 65 |...
€144,18 €119,16 €132,65 €109,62
You save 8%
Showing 1 - 48 of 318

Deutz-Fahr DX 4.30 parts

Oil at the front of the engine, a slipping clutch or an alternator that has stopped charging are the usual reasons a DX 4.30 ends up in the workshop. This page lists more than 300 replacement parts for the Deutz-Fahr DX 4.30, made by GRANIT and by brands such as HELLA, LUK, MAHLE and ROCKINGER.

Engine and fuel system

For the engine there are crankshaft seals, exhaust gaskets, O-rings and repair sets for the feed pump, as well as a double pump.

Drive a new crankshaft seal in square with a suitable drift or a piece of tube, never with single taps on the edge. Check the shaft first. If the old lip has worn a groove, set the new seal slightly deeper or shallower so the lip runs on a clean surface. After rebuilding the feed pump, bleed the fuel system before you try to start. Work the hand primer until clean fuel with no air bubbles comes out at the bleed screw.

Clutch and drivetrain

For the clutch there are complete clutch kits and separate thrust bearings. If you are splitting the DX 4.30 anyway, always replace the thrust bearing too. It adds little work while the tractor is apart, and a squealing bearing shortly after a new clutch is a waste of all that effort. While the lift housing is open, the lift shaft sealing rings are easy to reach as well.

Electrics and cab

On the electrical side you will find alternators, starter motors and push button switches, for example for the work lights. For the cab there are tractor seats, door locks and gas struts for doors and windows, and at the rear a drawbar.

If the starter turns slowly, measure the battery voltage while cranking and clean the earth strap and terminals before fitting a new starter motor. A poor earth connection looks just like a worn starter. If the cab door is stiff to close, try a dry lubricant on the door lock before you replace it.

Choosing the correct part

The type plate confirms you are working on a DX 4.30 from the DX 4 series. Because parts on older tractors have often been swapped over the years, the old part itself is your most dependable source. Look for the reference number on the alternator or starter body, count the pinion teeth on a starter, and compare the dimensions printed on the rim of a shaft seal.

More Deutz-Fahr

If you run other tractors from this brand alongside the DX 4.30, you will find them model by model under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart