Menu
EUR

Fendt 818 Vario tractor parts & technical data

Keep the Fendt 818 Vario going: more than 700 items for the Fendt 800 series model are listed here, including lighting, electrics and trailer couplings.

706 parts found for Fendt 818 Vario
Show:
GRANIT Radiator hose of radiator up to reservoir Ø 8 mm, length 1500 mm Fendt
GRANIT
Inner Ø: 8 mm. Length: 1500 mm. More
Inner Ø: 8 mm. Length: 1500 mm.
€25,45 €21,03
GRANIT V-belt tensioner Ø 70 mm, width 31 mm
GRANIT
Outer Ø: 70 mm. Width: 31 mm. More
Outer Ø: 70 mm. Width: 31 mm.
€350,96 €290,05 €333,40 €275,54
You save 5%
GRANIT Oil cooler bijpassend filter 565HU931.6X
€1.163,11 €961,25 €1.104,95 €913,18
You save 5%
GRANIT Multi-rib belt Fendt 712 (type 724) - 820 (type 731)
€56,95 €47,07 €54,10 €44,71
You save 5%
GRANIT Connecting rod bush Fendt
€20,60 €17,02
Connecting rod bolt Fendt
GRANIT Cylinder head bolt M12 x 134 mm engine TCD2012L04 4V-TCD3.6 L04
GRANIT
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M12 x 134 mm. More
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M1...
€23,80 €19,67
GRANIT End piece air intake pipe Fendt
€235,45 €194,59
GRANIT Rocker arm shaft engine BFM2013 Fendt
€107,46 €88,81 €102,00 €84,30
You save 5%
Push rod Fendt
€49,70 €41,07
GRANIT O-ring tank cap 75 x 4 mm Fendt
GRANIT Cylinder head gasket 1,2 mm, 1 bore engine TCD2012 L06 4V
€202,05 €166,98 €191,90 €158,60
You save 5%
GRANIT Turbocharger Fendt 711-716, 815-818
€1.616,00 €1.335,54
GRANIT Silencer Fendt
€1.048,79 €866,77 €996,35 €823,43
You save 5%
GRANIT Feed pump 3 hole, hole spacing vertical 29/33 mm, horizontal 51 mm
GRANIT
Version: 3 holes, Vertical hole spacing = 29/33 mm, Horizontal hole spacing = 51 mm. More
Version: 3 holes, Vertical hole spacing = 29/33 mm, Horizontal hole sp...
€150,16 €124,10 €142,65 €117,89
You save 5%
V-belt 1800 mm, 8 ribs Fendt
Belt length: 1800 mm. Ribs: 8 n. More
Belt length: 1800 mm. Ribs: 8 n.
€61,50 €50,83 €58,40 €48,26
You save 5%
GRANIT Feed pump 2 hole, hole spacing 53 mm, flange up to lever 55 mm Fendt
GRANIT
Version: 2 holes, Hole spacing: 53 mm, Flange to lever end: 55 mm. Menke no.: 59822. More
Version: 2 holes, Hole spacing: 53 mm, Flange to lever end: 55 mm. Men...
€40,96 €33,85 €38,90 €32,15
You save 5%
Seal filter housing Fendt
Ball pin steel M6, wrench size 8, E 10 mm Fendt 7387MI, Xylon 524
A: M6 mm. SW: 8. E: 10 mm. More
A: M6 mm. SW: 8. E: 10 mm.
€5,49 €4,54
GRANIT Gas strut hood 30 N, 145 mm, stroke 30 mm Fendt
GRANIT
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1: 6 mm. d2: 15,6 mm. To fit: Bonnet. Form: 1. More
Newtons: 30. A: 145 mm. B: 80 mm. C: 6 mm. D: 6 mm. Stroke: 30 mm. d1:...
€41,94 €34,66 €39,80 €32,89
You save 5%
Showing 361 - 384 of 706

Fendt 818 Vario parts, sorted by Typ number

The Fendt 818 Vario was made in more than one version, and the identification plate tells you which one you have. Next to the serial number it shows a Typ number. This page brings together more than 700 parts that fit the 818 Vario across both versions. Once you know your Typ number, the page for that version narrows things down to the parts meant for it:

If the plate has faded or been painted over, take the old part to hand. Starter motors and alternators usually carry a label or stamped reference number, and many moulded plastic parts have a number cast into them. Compare it with the details of the replacement before you order.

From the cab to the hitch

In the cab you will find push button switches such as the hazard light switch with lock, handles, and the rotary potentiometer for the linkage. Seats matter on a tractor that runs all day, and there are GRAMMER tractor seats here, including the air suspended Maximo Professional. For lighting there are LED work lamps, rear lights and holders to mount a lamp firmly on the cab roof.

Electrical work is covered by starter motors and alternators. Smaller parts include seals, sealing rings and O-rings, for example the seal for the tank sensor and the O-ring for the tank cap. At the rear there are Scharmüller drawbars and pins. The brands on this page include GRANIT, HELLA, Wabco, Scharmüller and GRAMMER.

Fitting a new gas strut

The gas strut that holds the windscreen frame open loses pressure over the years, until the screen creeps shut or swings closed in a gust. Fit the new strut with the piston rod pointing down. That keeps the seal inside the cylinder bathed in oil, so the strut holds its pressure for longer. Have someone hold the frame while you swap it, because without a strut it drops shut hard.

Other tractors in the Fendt 800 line

If your yard has more than one tractor from the Fendt 800, each model has its own page with the parts that fit it, which keeps orders tidy machine by machine: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. For older models and the rest of the make, go to the overview of Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart