Menu
EUR

Fendt 818 Vario tractor parts & technical data

Keep the Fendt 818 Vario going: more than 700 items for the Fendt 800 series model are listed here, including lighting, electrics and trailer couplings.

706 parts found for Fendt 818 Vario
Show:
Door lock, right Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€54,86 €45,34 €52,10 €43,06
You save 5%
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€36,24 €29,95 €34,40 €28,43
You save 5%
Lift arm left Fendt series 800, 815-818
€935,33 €773,00 €888,55 €734,34
You save 5%
Lift cylinder DW Fendt 718, 815-820
Clevis joint head cat. 3, A 32 mm, d1 28 mm, L 63 mm
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 mm. Menke no.: 55291. More
Category: 3. A: 32 mm. d1: 28 mm. D: 87 mm. E: 51 mm. L: 63 mm. H: 40 ...
€85,18 €70,40 €80,90 €66,86
You save 5%
GRANIT Spindle three-point Fendt
€209,31 €172,98 €198,80 €164,30
You save 5%
GRANIT Adjusting nut for lower link strut M27 x 3 Fendt
GRANIT
Dimensions: Thread = M27 x 3 mm. More
Dimensions: Thread = M27 x 3 mm.
€56,48 €46,68 €53,65 €44,34
You save 5%
GRANIT Gaiter three-point outer-Ø 80 mm, inner-Ø 45 mm, height 95 mm Fendt
GRANIT
Outer Ø: 80 mm. Height: 95 mm. Inner Ø: 45 mm. More
Outer Ø: 80 mm. Height: 95 mm. Inner Ø: 45 mm.
€56,29 €46,52 €53,45 €44,17
You save 5%
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system. Voltage: 12 V. Connection type: 2 x 6,3. Operating mode: electric. More
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system...
€35,71 €29,51 €32,30 €26,69
You save 10%
GRANIT Top link cat. 2, M30 x 3,5, 515 - 755 mm, hook/threaded spindle
GRANIT
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515 / 755 mm. E: 75 mm. H: 51 mm. Version: Standard. Type: Tail hook/ball joint. To... More
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 330 mm. D: 515...
€175,33 €144,90 €158,60 €131,07
You save 10%
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
Headlight panel right Fendt
Headlight panel left Fendt
Intermediate part for fender 145 mm Fendt
Dimensions: 145 mm. More
Dimensions: 145 mm.
€334,91 €276,79 €303,00 €250,41
You save 10%
GRANIT Extension right 155 mm Fendt Favorit 816-926, 712-930
GRANIT
Dimensions: 155 mm. More
Dimensions: 155 mm.
€421,50 €348,35
Intermediate part for 160 mm Fendt 712-930
Dimensions: 160 mm. More
Dimensions: 160 mm.
€619,15 €511,69
Showing 385 - 408 of 706

Fendt 818 Vario parts, sorted by Typ number

The Fendt 818 Vario was made in more than one version, and the identification plate tells you which one you have. Next to the serial number it shows a Typ number. This page brings together more than 700 parts that fit the 818 Vario across both versions. Once you know your Typ number, the page for that version narrows things down to the parts meant for it:

If the plate has faded or been painted over, take the old part to hand. Starter motors and alternators usually carry a label or stamped reference number, and many moulded plastic parts have a number cast into them. Compare it with the details of the replacement before you order.

From the cab to the hitch

In the cab you will find push button switches such as the hazard light switch with lock, handles, and the rotary potentiometer for the linkage. Seats matter on a tractor that runs all day, and there are GRAMMER tractor seats here, including the air suspended Maximo Professional. For lighting there are LED work lamps, rear lights and holders to mount a lamp firmly on the cab roof.

Electrical work is covered by starter motors and alternators. Smaller parts include seals, sealing rings and O-rings, for example the seal for the tank sensor and the O-ring for the tank cap. At the rear there are Scharmüller drawbars and pins. The brands on this page include GRANIT, HELLA, Wabco, Scharmüller and GRAMMER.

Fitting a new gas strut

The gas strut that holds the windscreen frame open loses pressure over the years, until the screen creeps shut or swings closed in a gust. Fit the new strut with the piston rod pointing down. That keeps the seal inside the cylinder bathed in oil, so the strut holds its pressure for longer. Have someone hold the frame while you swap it, because without a strut it drops shut hard.

Other tractors in the Fendt 800 line

If your yard has more than one tractor from the Fendt 800, each model has its own page with the parts that fit it, which keeps orders tidy machine by machine: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. For older models and the rest of the make, go to the overview of Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart