Menu
EUR

Fendt 818 Vario (Typ 718) tractor parts & technical data

With Typ 718 on the type plate, you are in the right place: more than 600 parts for the Fendt 818 Vario, including lighting, electrics and trailer couplings.

605 parts found for Fendt 818 Vario
Show:
GRANIT Outlet valve Fendt Farmer 409-412, Favorit 711-716, 309-820
€68,30 €56,45 €64,85 €53,60
You save 5%
GRANIT Radiator hose of radiator up to reservoir Ø 8 mm, length 1500 mm Fendt
GRANIT
Inner Ø: 8 mm. Length: 1500 mm. More
Inner Ø: 8 mm. Length: 1500 mm.
€25,45 €21,03
GRANIT V-belt tensioner Ø 70 mm, width 31 mm
GRANIT
Outer Ø: 70 mm. Width: 31 mm. More
Outer Ø: 70 mm. Width: 31 mm.
€350,96 €290,05 €333,40 €275,54
You save 5%
GRANIT Oil cooler bijpassend filter 565HU931.6X
€1.163,11 €961,25 €1.104,95 €913,18
You save 5%
GRANIT Multi-rib belt Fendt 712 (type 724) - 820 (type 731)
€56,95 €47,07 €54,10 €44,71
You save 5%
GRANIT Connecting rod bush Fendt
€20,60 €17,02
Connecting rod bolt Fendt
GRANIT Cylinder head bolt M12 x 134 mm engine TCD2012L04 4V-TCD3.6 L04
GRANIT
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M12 x 134 mm. More
Engine types: TCD2012L04 4V, TCD2012L06 4V, TCD3.6 L04. Dimensions: M1...
€23,80 €19,67
Suction hose air filter Fendt 714-818
€155,62 €128,61 €147,80 €122,15
You save 5%
GRANIT End piece air intake pipe Fendt
€235,45 €194,59
Stud bolt exhaust M8 / M10, 102 mm
Thread: M8 / M10. Length: 102 mm. Version: Thread M8 / M10, Length: 102 mm. More
Thread: M8 / M10. Length: 102 mm. Version: Thread M8 / M10, Length: 10...
€23,80 €19,67
GRANIT Rocker arm shaft engine BFM2013 Fendt
€107,46 €88,81 €102,00 €84,30
You save 5%
Push rod Fendt
€49,70 €41,07
GRANIT O-ring tank cap 75 x 4 mm Fendt
GRANIT Turbocharger Fendt 711-716, 815-818
€1.616,00 €1.335,54
GRANIT Silencer Fendt
€1.048,79 €866,77 €996,35 €823,43
You save 5%
GRANIT Feed pump 3 hole, hole spacing vertical 29/33 mm, horizontal 51 mm
GRANIT
Version: 3 holes, Vertical hole spacing = 29/33 mm, Horizontal hole spacing = 51 mm. More
Version: 3 holes, Vertical hole spacing = 29/33 mm, Horizontal hole sp...
€150,16 €124,10 €142,65 €117,89
You save 5%
GRANIT High-pressure pump Fendt, Deutz-Fahr
€593,51 €490,50 €563,80 €465,95
You save 5%
V-belt 1800 mm, 8 ribs Fendt
Belt length: 1800 mm. Ribs: 8 n. More
Belt length: 1800 mm. Ribs: 8 n.
€61,50 €50,83 €58,40 €48,26
You save 5%
GRANIT Feed pump 2 hole, hole spacing 53 mm, flange up to lever 55 mm Fendt
GRANIT
Version: 2 holes, Hole spacing: 53 mm, Flange to lever end: 55 mm. Menke no.: 59822. More
Version: 2 holes, Hole spacing: 53 mm, Flange to lever end: 55 mm. Men...
€40,96 €33,85 €38,90 €32,15
You save 5%
Seal filter housing Fendt
Showing 313 - 336 of 605

Fendt 818 Vario Typ 718 parts and wear items

Check the identification plate before anything else. If it reads Typ 718, this page is for your tractor: it lists only the parts intended for the Fendt 818 Vario in that version, more than 600 of them. A different Typ number means you are better served by Fendt 818 Vario (Typ 729), or by the general Fendt 818 Vario page, which covers both versions together.

What gets replaced on a Typ 718

Wear starts with the small items. There are seals, including the seal for the tank sensor, and discs and bushes for hinges and pivot points. Pins keep the lower links and the hitch where they belong, and complete Scharmüller drawbars are here too, such as the K80 with its locking pin.

Around the cab you will find gas struts for the windscreen frame, handles for the body panels and push button switches. Lighting is covered by work lamps, rear lights and holders. Starter motors and alternators look after the electrical side, and GRAMMER tractor seats look after the driver. Other brands on this page are GRANIT, HELLA and Wabco.

Replacing the linkage potentiometer

When the rear linkage jerks, hangs or will not lower to its set position, the linkage potentiometer is a common cause. It reports the position of the lift arms to the control unit. Check the plug and wiring first, since a corroded contact gives exactly the same symptoms. If the potentiometer itself is worn, lower the arms fully before removing it and note the position of the driver lever. After fitting, the linkage control normally has to relearn its end positions. Do that before you hitch up a heavy implement again.

Not sure a part is the right one? Compare the reference number on the old part with the details of the new one before ordering.

If the starter motor only clicks or turns slowly, measure the battery voltage first and check the heavy cables and the earth connection. A poor contact gives exactly those symptoms. With a drawbar, pay attention to the rail width and the thickness of the locking pin, because two drawbars that look the same can differ there.

The rest of the Fendt 800 line

If you look after more than one Fendt, every model in the line has its own page with matching parts: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. The whole make is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart