Menu
EUR

Fendt 818 Vario (Typ 718) tractor parts & technical data

With Typ 718 on the type plate, you are in the right place: more than 600 parts for the Fendt 818 Vario, including lighting, electrics and trailer couplings.

605 parts found for Fendt 818 Vario
Show:
Piston set complete Ø 98 mm, combustion chamber Ø 59,9 mm Fendt
Dimensions: 3 rings, Ø 98 mm, gudgeon pin Ø 38 x 76 mm, combustion chamber Ø 59.9 mm, combustion chamber depth 18 mm, dry liner. More
Dimensions: 3 rings, Ø 98 mm, gudgeon pin Ø 38 x 76 mm, combustion c...
€248,92 €205,72 €236,45 €195,41
You save 5%
GRANIT Piston ring set 3 rings Ø 98 mm, 2,9 mm trapezoidal ring / 2 mm / 3 mm
GRANIT
Dimensions: 3 rings, Ø 98 mm, 2.9 mm (trapezoidal ring) / 2 mm / 3 mm. More
Dimensions: 3 rings, Ø 98 mm, 2.9 mm (trapezoidal ring) / 2 mm / 3 mm
€63,50 €52,48 €60,30 €49,83
You save 5%
GRANIT Thread insert Fendt Farmer 200-270
€42,04 €34,74 €39,90 €32,98
You save 5%
GRANIT Spring U-bolt lower exhaust Fendt
Valve cover gasket lower engine TCD2012 L06 4V
€57,21 €47,28 €54,30 €44,88
You save 5%
GRANIT O-ring feed pump Fendt
€11,10 €9,17
High-pressure pump Fendt, Deutz-Fahr
€360,75 €298,14 €342,70 €283,22
You save 5%
GRANIT Solenoid valve end plate Fendt
€383,39 €316,85 €364,20 €300,99
You save 5%
GRAMMER Tractor seat Maximo XT Dynamic Plus MSG97AL/741 Fendt
GRAMMER
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 381 mm. Seat... More
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery typ...
€4.700,98 €3.885,11 €4.465,90 €3.690,83
You save 5%
Gas strut hood 530 N, 590 mm, stroke 210 mm Fendt
suitable for: Motorhaube. Newtons: 530. A: 590 mm. B: 300 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 210 mm. To fit: Bonnet. More
suitable for: Motorhaube. Newtons: 530. A: 590 mm. B: 300 mm. C: 10 mm...
€72,47 €59,89 €68,80 €56,86
You save 5%
Door lock, left Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€59,17 €48,90 €56,20 €46,45
You save 5%
GRANIT Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
€39,45 €32,60 €37,45 €30,95
You save 5%
GRANIT Pin support 20,3 x 130 mm Fendt
GRANIT
Dimensions: 20.3 x 130 mm. More
Dimensions: 20.3 x 130 mm.
€78,53 €64,90 €74,60 €61,65
You save 5%
Oil seal 72 x 90 x 10 mm Fendt Favorit 711-716, Fendt 711-820
Dimensions: 72 x 90 x 10 mm. More
Dimensions: 72 x 90 x 10 mm.
€36,24 €29,95 €34,40 €28,43
You save 5%
Seal kit external lift cylinder Ø 36/100 mm Fendt
Dimensions: Ø 36/100 mm mm. Technical data: für außenliegenden Hubzylinder. More
Dimensions: Ø 36/100 mm mm. Technical data: für außenliegenden Hubz...
€147,52 €121,92 €140,10 €115,79
You save 5%
Rod end lower Fendt
€253,50 €209,50 €240,80 €199,01
You save 5%
GRANIT Graduated tube Fendt
€224,82 €185,80 €213,55 €176,49
You save 5%
Yoke Fendt Farmer 409-412, Favorit 711-716, Fendt 818
€193,41 €159,84 €183,70 €151,82
You save 5%
Showing 433 - 456 of 605

Fendt 818 Vario Typ 718 parts and wear items

Check the identification plate before anything else. If it reads Typ 718, this page is for your tractor: it lists only the parts intended for the Fendt 818 Vario in that version, more than 600 of them. A different Typ number means you are better served by Fendt 818 Vario (Typ 729), or by the general Fendt 818 Vario page, which covers both versions together.

What gets replaced on a Typ 718

Wear starts with the small items. There are seals, including the seal for the tank sensor, and discs and bushes for hinges and pivot points. Pins keep the lower links and the hitch where they belong, and complete Scharmüller drawbars are here too, such as the K80 with its locking pin.

Around the cab you will find gas struts for the windscreen frame, handles for the body panels and push button switches. Lighting is covered by work lamps, rear lights and holders. Starter motors and alternators look after the electrical side, and GRAMMER tractor seats look after the driver. Other brands on this page are GRANIT, HELLA and Wabco.

Replacing the linkage potentiometer

When the rear linkage jerks, hangs or will not lower to its set position, the linkage potentiometer is a common cause. It reports the position of the lift arms to the control unit. Check the plug and wiring first, since a corroded contact gives exactly the same symptoms. If the potentiometer itself is worn, lower the arms fully before removing it and note the position of the driver lever. After fitting, the linkage control normally has to relearn its end positions. Do that before you hitch up a heavy implement again.

Not sure a part is the right one? Compare the reference number on the old part with the details of the new one before ordering.

If the starter motor only clicks or turns slowly, measure the battery voltage first and check the heavy cables and the earth connection. A poor contact gives exactly those symptoms. With a drawbar, pay attention to the rail width and the thickness of the locking pin, because two drawbars that look the same can differ there.

The rest of the Fendt 800 line

If you look after more than one Fendt, every model in the line has its own page with matching parts: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. The whole make is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart