Menu
EUR

Fendt 818 Vario (Typ 718) tractor parts & technical data

With Typ 718 on the type plate, you are in the right place: more than 600 parts for the Fendt 818 Vario, including lighting, electrics and trailer couplings.

605 parts found for Fendt 818 Vario
Show:
Seal kit Fendt Farmer 409 (Typ 409), Fendt 820 (Typ 731)
€141,74 €117,14 €134,65 €111,28
You save 5%
Ball joint 395 mm, M22 x 1,5, M26 x 1,5, taper 24,6 - 28,5 mm
A: 395 mm. C: M22 x 1,5 mm. D: M26 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 395 mm. C: M22 x 1,5 mm. D: M26 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€112,07 €92,62 €106,45 €87,98
You save 5%
Repair set clutch cylinder mineral oil Fendt
Medium: Mineral oil. More
Medium: Mineral oil.
€70,42 €58,20 €66,85 €55,25
You save 5%
Wabco Reservoir for antifreeze pump
€106,94 €88,38 €101,55 €83,93
You save 5%
GRANIT Rubber plug brake cylinder DOT4 Fendt Farmer 240-307
€6,40 €5,29
GRANIT Hand brake cable right mechanical 1380 mm, thread 16 mm Fendt
GRANIT
Length: 1380 mm. Thread: 16. Dimensions: Length: 1380 mm, Thread 16 mm. Menke no.: 207836. More
Length: 1380 mm. Thread: 16. Dimensions: Length: 1380 mm, Thread 16 mm...
€195,05 €161,20 €185,25 €153,10
You save 5%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 70 mm, bore 22,5 mm
Scharmüller
suitable for: Fendt. Series: Favorit-Vario 700. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 7... More
suitable for: Fendt. Series: Favorit-Vario 700. Category: Pick-up hitc...
€1.375,55 €1.136,82
Dayco Multi-rib belt Powerband 8 ribs, 1790 mm, Heavy Duty
Dayco
Length: 1790 mm. Ribs: 8 n. Version: Heavy Duty. More
Length: 1790 mm. Ribs: 8 n. Version: Heavy Duty.
€65,21 €53,89 €61,90 €51,16
You save 5%
GRANIT Adaptor water pump - cylinder head Ø 27 x 40 x 34 mm Fendt
GRANIT
Dimensions: Ø 27 x 40 x 34 mm. More
Dimensions: Ø 27 x 40 x 34 mm.
€7,00 €5,79
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
You save 5%
Handle Fendt, Case IH
€39,20 €32,40 €37,20 €30,74
You save 5%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 Fendt
GRAMMER
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Jo... More
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery typ...
€2.564,90 €2.119,75
GRANIT Pin for rear window handle Fendt
€55,60 €45,95 €52,80 €43,64
You save 5%
Breather filter oil tank Fendt
€46,85 €38,72 €44,50 €36,78
You save 5%
GRANIT Clamping bush for lower links 29 x 36 x 27,5 mm Fendt
GRANIT
Dimensions: 29 x 36 x 27.5 mm. More
Dimensions: 29 x 36 x 27.5 mm.
€24,95 €20,62
Windshield frame shock absorber 250 N, 600 mm, ball socket 10 mm Fendt
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: windscreen. Menke no.: 54807. More
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 ...
€37,58 €31,06 €35,70 €29,50
You save 5%
Hydraulic top link cat. 3, 675 - 955 mm, stroke 280 mm, Ø 90 mm
A cat.: 3 / 32. B cat.: 3 / 32. F: 675 / 955 mm. Piston rod Ø D: 40 mm. Cylinder Ø inner E: 90 mm. Check valve: Top. Lifting force: 11 t. Tensile fo... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 675 / 955 mm. Piston rod Ø D: 40 m...
€1.360,40 €1.124,30 €1.292,35 €1.068,06
You save 5%
GRANIT Lock hood Fendt
€56,57 €46,75 €53,70 €44,38
You save 5%
GRANIT Fender extension right Fendt
€127,65 €105,50
Showing 193 - 216 of 605

Fendt 818 Vario Typ 718 parts and wear items

Check the identification plate before anything else. If it reads Typ 718, this page is for your tractor: it lists only the parts intended for the Fendt 818 Vario in that version, more than 600 of them. A different Typ number means you are better served by Fendt 818 Vario (Typ 729), or by the general Fendt 818 Vario page, which covers both versions together.

What gets replaced on a Typ 718

Wear starts with the small items. There are seals, including the seal for the tank sensor, and discs and bushes for hinges and pivot points. Pins keep the lower links and the hitch where they belong, and complete Scharmüller drawbars are here too, such as the K80 with its locking pin.

Around the cab you will find gas struts for the windscreen frame, handles for the body panels and push button switches. Lighting is covered by work lamps, rear lights and holders. Starter motors and alternators look after the electrical side, and GRAMMER tractor seats look after the driver. Other brands on this page are GRANIT, HELLA and Wabco.

Replacing the linkage potentiometer

When the rear linkage jerks, hangs or will not lower to its set position, the linkage potentiometer is a common cause. It reports the position of the lift arms to the control unit. Check the plug and wiring first, since a corroded contact gives exactly the same symptoms. If the potentiometer itself is worn, lower the arms fully before removing it and note the position of the driver lever. After fitting, the linkage control normally has to relearn its end positions. Do that before you hitch up a heavy implement again.

Not sure a part is the right one? Compare the reference number on the old part with the details of the new one before ordering.

If the starter motor only clicks or turns slowly, measure the battery voltage first and check the heavy cables and the earth connection. A poor contact gives exactly those symptoms. With a drawbar, pay attention to the rail width and the thickness of the locking pin, because two drawbars that look the same can differ there.

The rest of the Fendt 800 line

If you look after more than one Fendt, every model in the line has its own page with matching parts: Fendt 815 Vario, Fendt 820 Vario, Fendt 822 Vario, Fendt 824 Vario, Fendt 826 Vario and Fendt 828 Vario. The whole make is under Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart