Menu
EUR

Fendt 828 Vario tractor parts & technical data

More than 350 replacement parts fit the Fendt 828 Vario from the 800 series. The range on this page includes lighting, electrics and trailer couplings.

392 parts found for Fendt 828 Vario
Show:
Gear reduction starter 12 V, 4,0 kW, 9 teeth clockwise, flange 29 mm
€399,37 €330,06 €367,42 €303,65
You save 8%
Hosetail brake line Fendt
GRAMMER Tractor seat Maximo XT Evolution Dynamic air suspended fabric 550 mm
GRAMMER
To fit: Fendt new SCR and S4. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 380 mm. Seat wi... More
To fit: Fendt new SCR and S4. Suspension: Air suspension. Upholstery t...
€8.006,28 €6.616,76 €7.415,78 €6.128,74
You save 7%
Engine preheater connection thread M27 x 1,5 Fendt, Deutz-Fahr
Connection: Thread M27 x 1.5. More
Connection: Thread M27 x 1.5.
€417,25 €344,83 €383,87 €317,25
You save 8%
VICTOR REINZ Cylinder head gasket Fendt 714-724, 819-828
€255,81 €211,41 €235,35 €194,50
You save 8%
Outlet valve Fendt
€44,91 €37,12 €41,32 €34,15
You save 8%
Borg Warner Fan clutch Fendt 822-828
€981,70 €811,32 €825,81 €682,49
You save 16%
Reducer to intercooler Fendt 822-939
€126,88 €104,86 €116,73 €96,47
You save 8%
NOX sensor after SCR catalytic converter after diesel particulate filter Fendt
Description: Before catalytic converter after diesel particulate filter. To fit: Fendt. Installation location: After SCR catalytic converter. More
Description: Before catalytic converter after diesel particulate filte...
€1.005,16 €830,71 €924,75 €764,25
You save 8%
Connecting rod bearing standard 70 mm
€41,83 €34,57 €38,48 €31,80
You save 8%
Profile clamp Fendt 712-828
€115,81 €95,71 €106,55 €88,05
You save 8%
Cylinder head bolt M12 x 162 mm engine TCD3.6L04-TTCD6.1L06
Dimensions: M12 x 162 mm. More
Dimensions: M12 x 162 mm.
€24,99 €20,65
Belt tensioner Ø 70 mm, width 31 mm, Fendt 819-828
Outer Ø: 70 mm. Width: 31 mm. More
Outer Ø: 70 mm. Width: 31 mm.
€403,64 €333,59 €371,35 €306,90
You save 8%
Tank cap reservoir thread 47 mm, grommet-Ø 47 mm
Neck Ø: 47 mm. Version: Thread 47 mm, For expansion tank. More
Neck Ø: 47 mm. Version: Thread 47 mm, For expansion tank.
€12,79 €10,57
O-ring 30 x 5 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€7,80 €6,45
Temperature sensor katalysator Fendt
Description: At catalytic converter. More
Description: At catalytic converter.
€192,93 €159,45 €177,50 €146,69
You save 8%
Profile clamp Fendt
€82,12 €67,87 €75,55 €62,44
You save 8%
Injector Fendt 819-828, Lamborghini Mach 250 VRT, Deutz-Fahr 7250
€838,39 €692,88 €771,32 €637,45
You save 8%
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€22,21 €18,36
Gas strut door 350 N, 405 mm, stroke 160 mm Fendt
suitable for: Tür. Newtons: 350. A: 405 mm. B: 200 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 160 mm. To fit: door. More
suitable for: Tür. Newtons: 350. A: 405 mm. B: 200 mm. C: 10 mm. D: 1...
€37,69 €31,15 €34,67 €28,66
You save 8%
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€37,82 €31,26 €34,79 €28,76
You save 8%
Bar three-point parts Fendt
Pin linkage Fendt 819-939
€71,07 €58,74 €65,38 €54,04
You save 8%
Guide bar adjuster Fendt
Holder Fendt Farmer 5, Fendt 939 (Typ 954)
€61,52 €50,84 €56,60 €46,78
You save 8%
Pin for lower link strut 28 x 91 mm Fendt
Dimensions: 28 x 91 mm. More
Dimensions: 28 x 91 mm.
€58,31 €48,19 €53,65 €44,33
You save 8%
Mirror heated, electric adjustment, 12 V, right / left Fendt
Version: Heated. Operating voltage: 12 V. Installation location: Right/left. Notes: Electric adjustment. More
Version: Heated. Operating voltage: 12 V. Installation location: Right...
€242,62 €200,51 €223,21 €184,47
You save 8%
Detent linkage Fendt
ROCKINGER Drawbar without sensor rail 390 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.013,32 €837,45 €780,74 €645,24
You save 23%
Brackets short 390 - 571 mm Fendt
Length min./max.: 390 - 571 mm. More
Length min./max.: 390 - 571 mm.
€247,45 €204,50 €227,65 €188,14
You save 8%
Step 440 x 184 mm Fendt
Dimensions: 440 x 184 mm. More
Dimensions: 440 x 184 mm.
€150,14 €124,08 €138,13 €114,16
You save 8%
Rubber plate steps Fendt 819-828
€118,69 €98,09 €109,19 €90,24
You save 8%
Solenoid switch clutch 42 V, 0,5 A, 10 W/VA, with cable and plug
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug. More
Version: 42 V 0.5 A, 10W / VA, With cable and connecting plug.
€67,22 €55,55
Potentiometer clutch pedal and gear lever
Version: Clutch pedal (position) and gear shift (driving range detection level 1 or 2). More
Version: Clutch pedal (position) and gear shift (driving range detecti...
€131,96 €109,06 €121,40 €100,33
You save 8%
Start switch 12 V / 24 V, lock 14603-2 keys
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, 58, 0: off, 1: consumer, 2: start. Switching stages: 0-1-2. Plug: 7. Voltage ran... More
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, ...
€57,03 €47,13 €52,47 €43,36
You save 8%
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
SACEX
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 128 mm. Total height: 204 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€42,68 €35,27 €39,27 €32,45
You save 8%
Showing 193 - 240 of 392

Fendt 828 Vario parts start with the Typ number

The Fendt 828 Vario comes in more than one version, so the first thing to check is the type plate. Behind the word Typ you will find a number, and each Typ number has its own page with the parts that belong to that version:

This page brings together more than 350 parts that fit the 828 Vario across both versions. If you know your Typ number, the version page gets you there faster. If the plate has worn away, use the reference number on the old part instead. Alternators, sensors and switches nearly always have it on the housing.

Seat, lighting and climate

Long days in an 828 soon show up a tired seat. There are air suspended tractor seats from GRAMMER such as the Maximo Professional. For lighting there are LED work lights from HELLA, rotating beacons with their brackets, and the spring that holds a beacon securely in its holder. The air conditioning is covered by a temperature sensor.

Charging, hydraulics and air brakes

Further back you will find alternators, hydraulic pumps and Wabco connector heads for the trailer brakes, plus push button switches, discs, covers, tank caps and a long list of seals and gaskets.

A word on alternators. When the dash shows a charging fault, measure the charging voltage with the engine running and check the belt tension and the earth cable first. A slipping belt or a corroded terminal produces exactly the same symptom as a failed alternator and takes minutes to put right. If the voltage is still low after those checks, replacement is the sensible next step.

With an air suspended seat, track down the fault before ordering. A seat that slowly sinks usually points to a leaking air spring or a split hose to the small compressor under the cushion. One that bottoms out hard or rattles has a worn damper. Individual parts can keep a good seat going for years, but once the frame itself is worn, a complete Maximo Professional is the kinder choice for your back.

The rest of the Fendt 800 range

These tractors from the same range have their own pages too, which is useful with a mixed fleet where you want to see per tractor what fits:

For any other model from the brand, go to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart