Menu
EUR

Tractor parts Fendt Farmer 310 (Typ 310)

Looking for parts for your Fendt Farmer 310 (Typ 310) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

717 parts found for Fendt Farmer 310 (Typ 310)
Show:
KS Piston set, complete Ø 105 mm, piston pin 35 x 88 mm
KS
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion chamber Ø 60 mm, Combustion chamber depth 21.7 mm, Ring carrier piston. Descrip... More
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion ...
€300,43 €248,29 €273,50 €226,03
You save 9%
VICTOR REINZ Crankshaft seal rear MWM, Fendt
€105,19 €86,93 €95,75 €79,13
You save 9%
Reservoir radiator Fendt
€132,59 €109,58 €120,70 €99,75
You save 9%
Radiator hose, bottom Ø 38/18/50 mm Fendt
Inner Ø: 38 / 18 / 50 mm. More
Inner Ø: 38 / 18 / 50 mm.
€351,52 €290,51 €320,00 €264,46
You save 9%
Cylinder head bolt M14 x 158 mm Case IH, Steyr, Fendt
Dimensions: M14 x 158 mm. Supplementary set: With thread at the top. More
Dimensions: M14 x 158 mm. Supplementary set: With thread at the top.
€47,30 €39,09 €43,00 €35,54
You save 9%
Oil pump line-Ø 30 mm Case IH, Renault, Steyr, Fendt
Dimensions: Pipe Ø 30 mm. More
Dimensions: Pipe Ø 30 mm.
€450,34 €372,18 €409,95 €338,80
You save 9%
Handle Fendt, Case IH
€40,91 €33,81 €37,20 €30,74
You save 9%
Handle Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€37,82 €31,26 €34,40 €28,43
You save 9%
GRANIT Force sensor pin with gaiter Fendt
€277,80 €229,59 €252,90 €209,01
You save 9%
GRANIT Pin for lifting strut bottom 22 x 100 mm Fendt
GRANIT
Dimensions: 22 x 100 mm. More
Dimensions: 22 x 100 mm.
€53,89 €44,54 €49,00 €40,50
You save 9%
Hook lock hood Fendt
Headlight panel Fendt Farmer 310-312, Favorit 509-515
€130,78 €108,08 €119,00 €98,35
You save 9%
GRANIT Detent linkage Fendt
€25,55 €21,12
ROCKINGER Flange hitch without hand coupling pin 31,5 mm, 140 x 80 mm, M17
ROCKINGER
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value: 78,2 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Connecting pin: 3... More
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D...
€909,30 €751,49 €700,61 €579,02
You save 23%
GRANIT Potentiometer rotary function for control unit EHR
GRANIT
Version: For electronic linkage control unit. More
Version: For electronic linkage control unit.
€96,80 €80,00
GRANIT Solenoid switch operation foot brake 42 V, 0,5 A, plug connection
GRANIT
Version: 42 V 0.5 A, 10W / VA, Plug connection. Menke no.: 210029. More
Version: 42 V 0.5 A, 10W / VA, Plug connection. Menke no.: 210029.
€56,65 €46,82
GRANIT Start switch 12 V / 24 V, built-in-Ø 26,5 mm - 2 keys
GRANIT
Version: • With 2 moulded reversible safety keys made of nickel silver, • For central locking, • Waterproof DIN 40050, IP64, • Dustproof and w... More
Version: • With 2 moulded reversible safety keys made of nickel silv...
€54,72 €45,22 €49,80 €41,16
You save 9%
HELLA Rocker switch work light locks in place, 4 connections
HELLA
Version: Single-stage, with circuit, with location and function light, rocker operation. To operate: Kippbetätigung. Switching function: mit Komfortf... More
Version: Single-stage, with circuit, with location and function light,...
€22,00 €18,18
GRANIT Push button switch fan 12 / 24 V, button yellow, Ø 30 mm
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€47,74 €39,45 €43,45 €35,91
You save 9%
Knob for control unit - heater
Version: For control unit - heater. More
Version: For control unit - heater.
€14,95 €12,36
GRANIT Rotary switch fan 3-stage, black button, 5 connections
GRANIT
Version: For blower, 3-speed, splashproof, 5 blade terminals 6.3 mm, power rating: 12 V / 23 A / 280 W, mounting opening Ø 12 mm / 8 mm mounting thic... More
Version: For blower, 3-speed, splashproof, 5 blade terminals 6.3 mm, p...
€40,15 €33,18 €36,55 €30,21
You save 9%
SACEX Beacon H1 Saturnello orange 12 V, Ø 128 mm, 204 mm, push-on pin
SACEX
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 128 mm. Total height: 204 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€42,68 €35,27 €38,85 €32,11
You save 9%
LED work lights flood beam 44 W, 3750 lm, 199 x 87 x 72 mm
... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 199 x ...
€307,58 €254,20 €280,00 €231,41
You save 9%
GRANIT Reflector rectangular red plastic, bonded
GRANIT
Colour: Red. Form: Rectangular. Material: Plastic. Mounting type: Bonded. More
Colour: Red. Form: Rectangular. Material: Plastic. Mounting type: Bond...
€8,70 €7,19
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€35,50 €29,34
Pipe RKLE
€102,02 €84,31 €92,85 €76,74
You save 9%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€89,72 €74,15 €81,65 €67,48
You save 9%
HELLA Holder bracket for work lights
HELLA
To fit: Work light. Mounting type: Bracket mounting. More
To fit: Work light. Mounting type: Bracket mounting.
€11,95 €9,88
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€56,19 €46,44 €54,11 €44,72
You save 4%
GRANIT Double hydraulic pump 16 + 14 cm³/rpm., taper 1:5
€405,95 €335,50 €369,55 €305,41
You save 9%
Cab filter 406 x 120 x 58 mm
To fit as: Fendt More
To fit as: Fendt
€33,80 €27,93
GRANIT Mirror unheated right / left 298 x 219 mm, rod Ø 18 - 22 mm
GRANIT
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6505, 6506, 6510, 6520, 6600, 6610,... More
Tractor type: John Deere 6000, 6010, 6100, 6110, 6120, 6200, 6205, 621...
€40,53 €33,50 €36,85 €30,45
You save 9%
Pipe set steering valve double-acting Fendt Farmer, GT, Favorit
€288,36 €238,31 €262,50 €216,94
You save 9%
AKS-Dasis Evaporator 685 x 130 x 95 mm Fendt Farmer 307 - Favorit 926
AKS-Dasis
Equipment: Mesh length: 685 mm Mesh width: 130 mm Mesh depth: 95 mm Inlet Ø: 15 mm Outlet Ø: 12 mm More
Equipment: Mesh length: 685 mm Mesh width: 130 mm Mesh depth: 95 mm In...
€662,50 €547,52 €603,10 €498,43
You save 9%
ZF Shim washer front axle 0,3 x 102,5 mm Fendt Farmer 308-312, GT 380-395
ZF
Stärke: 0,3 Dicke (mm): 102,5 | Reference no.: 4472.364.137 More
Stärke: 0,3 Dicke (mm): 102,5 | Reference no.: 4472.364.137
€37,31 €30,83 €33,95 €28,06
You save 9%
SANDEN Aircon compressor 10PA15C, 24 V, pulley Ø 130 mm Fendt
SANDEN
Reference no.: ACE99502 | For compressor: 10PA15C | Pulley Ø (mm): 130 | Fixing: DM | A1 | Nominal voltage (V): 24 | Refrigerant: R134a | Oil quantit... More
Reference no.: ACE99502 | For compressor: 10PA15C | Pulley Ø (mm): 13...
€487,76 €403,11 €444,00 €366,94
You save 9%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€468,16 €386,91 €280,40 €231,74
You save 40%
Wabco Pressure regulator with silencer 12,5 bar, M22 x 1,5 Fendt
Wabco
Pressure regulator cut-off pressure (bar): 12,5 More
Pressure regulator cut-off pressure (bar): 12,5
€602,75 €498,14
Wabco Repair set antifreeze pump Fendt Farmer 240 S - 409
€264,90 €218,93 €247,80 €204,79
You save 6%
Wabco Trailer control valve with drukbegrenzing without lever 8 bar, M22 x 1,5
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€484,47 €400,39 €474,00 €391,74
You save 2%
Showing 193 - 240 of 717

Fendt Farmer 310 (Typ 310) specs

The Fendt Farmer 310 is part of the Farmer 300 series and was produced from 1993 to 2000. It sits in the middle of the lineup, with the Farmer 309 below it (70.8 kW) and the Farmer 311 above (85.8 kW). The 310 puts out 78.3 kW (105 hp), making it a widely used tractor on mixed farms where both fieldwork and transport tasks were part of daily operations.

Engine

Power comes from an MWM TD226.B4, a liquid-cooled four-stroke four-cylinder turbocharged diesel with direct injection. This is the same engine family used in the predecessor (the Farmer 310 LS), but in the B4 variant with a slightly larger displacement. The technical details:

  • Type: MWM TD226.B4, turbodiesel, 4-cylinder, liquid-cooled
  • Displacement: 4.2 L (253.5 ci)
  • Bore x stroke: 105 x 120 mm
  • Power: 78.3 kW / 105 hp at 2300 rpm
  • Max. torque: 419 Nm (309 lb-ft) at 1500 rpm
  • Fuel tank: 135 L (35.7 gal)
  • Electric starter: 12V

Transmission and travel speed

The Farmer 310 uses a fully synchronized Fendt EHS reversing transmission with 21 forward and reverse gears. The system works with three gears across two ranges, combined with a three-speed power shift and additional overdrive quick-change ranges. The 40 km/h overdrive was not available in all markets. Direction changes are handled electro-hydraulically.

Hydraulics and PTO

  • Hydraulic pump: Bosch tandem gear pump, 74 L/min at 180 bar (from 1991)
  • Rear lift capacity: 5,140 kg (earlier versions: 4,840 kp)
  • Rear linkage: category II/III
  • Optional front linkage: category II, max. lift capacity 2,945 kp
  • Rear PTO: independent, 540/750/1000 rpm, electro-hydraulic clutch
  • Front PTO: independent, 1000 rpm (optional), electro-hydraulic clutch
  • Standard control valves: 1 single-acting + 1 double-acting, operated via cross switch

Axles and drivetrain

The rear axle uses a bevel gear setup in portal design. The front axle is a power-shift ZF steering drive axle, type ZF APL 700 F4 (from 1990), with an electro-hydraulic four-wheel drive system and differential lock. The differential lock is electro-hydraulic on both front and rear. Brakes are hydraulic disc brakes and steering is hydraulically assisted.

Dimensions and weights

Wheelbase is 233 cm (91.9 in), overall length 418 cm (164.6 in), width 228 cm (89.8 in) and cab height 279 cm (110 in). Unladen weight is 4,900 kg (10,804 lbs), with a maximum permitted weight of 7,500 kg (16,535 lbs). Front tread is 183 cm and rear tread 180 cm.

Tyres

Standard tyres are 420/70R24 front and 480/70R38 rear. A range of optional tyre sizes is also available, including 480/70R24 front with 520/70R38 or 600/65R38 rear, as well as narrower configurations for tramline systems such as 11.2R32 front and 11.2R48 rear.

Electrical system and cab

The electrical system runs on 12V with negative ground. The alternator delivers 95 amps and the battery has a capacity of 110 Ah. The cab comes with air conditioning as standard.

Parts and brands for the Fendt Farmer 310

We supply a wide range of parts for the Fendt Farmer 310, covering engine components, cooling parts, hydraulics, brakes, electrics and cab parts. The parts we stock come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller, giving you the choice between quality aftermarket alternatives and brand-specific parts depending on what your situation calls for.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart