Web Analytics
Fendt Favorit 509 (Typ 509) tractor parts & specs - Techniek Totaal
Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

521 Products
Show:
GRANIT Cap for connector head
GRANIT
Cap for connector head
Version: Yellow.
€13,09 €10,82
 
GRANIT Clevis
GRANIT
Clevis
€9,99 €8,26
 
GRANIT Rubber plug
GRANIT
Rubber plug
Medium: DOT4.
€4,99 €4,12
 
GRANIT Rocker for hand brake lever
GRANIT
Rocker for hand brake lever
€9,79 €8,09
 
GRANIT Gaiter
GRANIT
Gaiter
€44,09 €36,44
 
GRANIT Cap
GRANIT
Cap
€16,89 €13,96
 
GRANIT Accessory set for brake caliper
5%
GRANIT
Accessory set for brake caliper
€63,19 €52,22 €60,09 €49,66
 
GRANIT Sealing ring
5%
GRANIT
Sealing ring
Version: 70 x 85 x 10 / 11,5 mm.
€65,18 €53,87 €61,99 €51,23
 
GRANIT PTO shaft end piece
15%
GRANIT
PTO shaft end piece
Version: Length 135 mm, 1 3/8", 6 grooves.
€751,08 €620,73 €638,49 €527,68
 
GRANIT Compression spring for gearshift
GRANIT
Compression spring for gearshift
Dimensions: Length 19,5, Ø 10,5, Wire thickness 1,5.
€3,89 €3,21
 
GRANIT Selector cover top
7%
GRANIT
Selector cover top
€123,27 €101,88 €114,69 €94,79
 
GRANIT Shim
GRANIT
Shim
Thickness: 0,25 mm.
€7,99 €6,60
 
GRANIT Shim
GRANIT
Shim
Thickness: 0,15 mm.
€7,09 €5,86
 
GRANIT Gaiter
GRANIT
Gaiter
€40,49 €33,46
 
GRANIT Bush
GRANIT
Bush
Dimensions (mm): 35.7 x 62 x 48.
€42,39 €35,03
 
GRANIT Bush for lifting shaft
GRANIT
Bush for lifting shaft
Dimensions (mm): 65 x 80 x 79.8.
€50,19 €41,48
 
GRANIT Sleeve for push rod support
GRANIT
Sleeve for push rod support
Dimensions (mm): Inner Ø = 16.4. Outer Ø = 35. Width = 25.
€6,69 €5,53
 
GRANIT Pin for lifting strut bottom
GRANIT
Pin for lifting strut bottom
Dimensions (mm): 20 x 110.
€22,89 €18,92
 
Borg Warner Fan clutch
15%
Borg Warner
Fan clutch
€324,39 €268,09 €275,79 €227,93
 
GRANIT V-belt
GRANIT
V-belt
€6,69 €5,53
 
GRANIT V-belt
GRANIT
V-belt
€15,19 €12,55
 
GRANIT Rubber elbow return, heater matrix
GRANIT
Rubber elbow return, heater matrix
€33,49 €27,68
 
GRANIT V-belt
GRANIT
V-belt
€8,39 €6,93
 
GRANIT Oil cooler
GRANIT
Oil cooler
€546,19 €451,40
 
Showing 217 - 240 of 521

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Manual-Automatic
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart